Extralite bolts and bar clamps kit for Ultrastem, include 2 Al 7075 Txx full CNC made bar clamps (25.4 mm or 31.8 mm diameter) and 6 custom grd 5 titanium torx bolts. Wheights only 12.5 gr (25.4 mm) and 13.5 gr (31.8 mm). This is the last version on the market and the kit is compatible with all kind of Ultrastem (MTB and road both) and if installed on <2011 Ultrastems will save 3-4 grams.
Extralite ExtraBolt 15 jockey wheels replacement bearing, fit Extrabolt 15.0-15.1-15.2. It's an high quality sealed low friction bearing, 12x8x3.5 mm size. Please remember that each jockey wheel require 2 bearings.
Extralite bar clamps kit for Ultrastem/Roadstem, include 2 Al 7075 Txx full CNC made bar clamps (25.4 mm diameter). Weights only 6.0 - 6.5 gr for the pair. The kit is compatible with all kind of Ultrastem and Roadstem (MTB and road both) and if installed on <2011 Ultrastems will save about 2 grams. Not compatible with oversize 31.8 mm stem like Ultrastem OC, Roadstem OC and Hyperstem.
Carbon-Ti X-Clamp QR Evo ultralight quick release seatpost clamp with Al7075-T6 CNC machined body and Titanium Grade 5 lever. Weights from 20 grams. Available in several diameters and anodized colours, white powdercoated or polished. 100% Made in Italy
Carbon-Ti X-Lock QR15 ultralight 15 mm thru axle for Fox or Rock Shox forks with standard width (15 x 100 mm) or Boost width (15 x 110 mm). Aluminum 7075T6 CNC made, several anodized colors and laser etched graphics. Weights from 34 gr. Works with a 5 mm hex wrench. 100% Made in Italy.
Carbon-Ti X-Lock 12 mm rear thru axle available in several standards (X-12 12x142; X-12 Boost 12x148; Shimano E-Thru 12x142 and 12x148 Boost; RockShox Maxle 12x142; Rock Shox Maxle 12x150; Rock Shox Maxle ABP 12x142 (192 mm); Rock Shox Maxle ABP Boost 12x148 (198 mm); Scott 12x142; Scott Boost (12x148). Aluminum 7075T6 CNC made, several anodized colors and laser etched graphics. Weights from 32 to 36 grams. Works with a 5 mm hex wrench.
Extralite HyperCap, headset cap for 1.1/8" standard stems. Fully alu 7075 T6 CNC machined, available in eight beautiful anodized colours with "pin-up" logo laser etching. Only 2.9 grams (ergal preload special bolt included).
Carbon-Ti X-Lock Special MTB ultralight high quality quick release skewers, with Gr.5 titanium axles and levers and Al7075T6 parts. Although 39 grams weight only, they offer high performances and reliability at the same time, so they're used in World Cup Competitions. Pair or singular availables in many colors.
Carbon-Ti X-Fix XS chainring bolts kit, special made per single or double chainrings. Al 7075T6 CNC made, Torx/Hex head, available in many anodized colors with laser Carbon-Ti logo. Only 5.2 gr weight for 4+4 kit (monoring) ;8.8 gr for 8+4 kit (double ring).
Carbon-Ti X-Fix Road chainring bolts kit, special made for road or MTB 5 holes chainrings. Al 7075T6 CNC made, Torx/Hex head, available in many anodized colors with laser Carbon-Ti logo. Only 8.5 gr weight for 5 males + 5 females kit.
Extralite torx bolts kit for Ultrastem, include 6 custom grd 5 titanium torx bolts. Wheights only 6.0 gr This is the last version on the market and the kit is compatible with all kind of Ultrastem (MTB and road both) and if installed on <2011 Ultrastems will save about 2 grams.
Carbon-Ti X-Plug steerer expander is a practical and lightweight removable accessory which allows the locking of the headset cap adjusting bolt. The special design allows an extremely wide compatibility with most 1.1/8" carbon or aluminum alloy steerers on the market, they only should have inner diameter between 21.2 and 25.0 mm. It's 7075T6 Aluminum fully CNC made and with only 14 grams allows to save a lot of weight from stock headset expander systems. It's compatible with headset caps with M6 bolts and could be installed with an 8 mm hex wrench key. 100% Made in Italy.
Extralite OctaOne, ultralight aluminium CNC made monoring for 9-10-11-12 speed drivetrains compatible with 104 bcd 4 holes standard. Available in 30T - 32T - 34T - 36T with weights from 28.5 gr. 100% Made in Italy.
Carbon-Ti X-MonoSync, ultralight monoring with synchronized teeth, grade 5 titanium CNC made, compatible with 9-10-11-12 speed drivetrain (Sram Eagle included). Available in 104 bcd or 76 bcd 4 holes fixing , or with direct engage for Sram/Truvativ, Specialized S-Works and Hollowgram cranks with 28T - 30T - 32T - 34T - 36T. Weight from 33 gr.
POP Products seatpost ultralight yokes, 7075T6 Aluminium CNC made, only 14 grams for the pair, available in many colors for M5 or M6 bolts diameter. Best for seatpost tuning. Sold in pair (2 yokes). Made in Swiss.