Stem

Carbon-Ti X-Cap Titanium Carbon-Ti X-Cap Titanium Carbon-Ti X-Cap Titanium

Carbon-Ti X-Cap Titanium

€16.31

Superlight headset Titanium Gr.5 cap, cnc machined supplied with a Torx 30mm Al7075-T6 anodized coloured bolt. Weights only 8.4 grams (bolt included). 100% Made in Italy.

    Carbon-Ti X-Cap Torx Spare Bolt

    Carbon-Ti X-Cap Torx Spare Bolt

    €3.20

    Carbon-Ti spare bolt for X-Cap Carbon and Titanium. TSPEI M6 x 35 bolt with conical head and Torx insert, Al7075T6 CNC made. Available in several anodized colors. 100% Made in Italy.

      Carbon-Ti X-Plug Steerer Expander Carbon-Ti X-Plug Steerer Expander Carbon-Ti X-Plug Steerer Expander

      Carbon-Ti X-Plug Steerer Expander

      €16.31

      Carbon-Ti X-Plug steerer expander is a practical and lightweight removable accessory which allows the locking of the headset cap adjusting bolt. The special design allows an extremely wide compatibility with most 1.1/8" carbon or aluminum alloy steerers on the market, they only should have inner diameter between 21.2 and 25.0 mm. It's 7075T6 Aluminum fully CNC made and with only 14 grams allows to save a lot of weight from stock headset expander systems. It's compatible with headset caps with M6 bolts and could be installed with an 8 mm hex wrench key. 100% Made in Italy.

        Extralite bar clamps kit for Ultrastem Extralite bar clamps kit for Ultrastem Extralite bar clamps kit for Ultrastem

        Extralite bar clamps kit for Ultrastem

        €20.41

        Extralite bar clamps kit for Ultrastem/Roadstem, include 2 Al 7075 Txx full CNC made bar clamps (25.4 mm diameter). Weights only 6.0 - 6.5 gr for the pair. The kit is compatible with all kind of Ultrastem and Roadstem (MTB and road both) and if installed on <2011 Ultrastems will save about 2 grams. Not compatible with oversize 31.8 mm stem like Ultrastem OC, Roadstem OC and Hyperstem.

          Extralite HyperCap Headset Cap Extralite HyperCap Headset Cap Extralite HyperCap Headset Cap

          Extralite HyperCap Headset Cap

          €23.77

          Extralite HyperCap, headset cap for 1.1/8" standard stems. Fully alu 7075 T6 CNC machined, available in ten beautiful anodized colours with "pin-up" logo laser etching. Only 2.9 grams (ergal preload special bolt included).

            Extralite Ultrastar 4 Expander - 1.1/4" - 5.7 gr. Extralite Ultrastar 4 Expander - 1.1/4" - 5.7 gr. Extralite Ultrastar 4 Expander - 1.1/4" - 5.7 gr.

            Extralite Ultrastar 4 Expander - 1.1/4" - 5.7 gr.

            €23.77
            The Ultrastar 4 expander is a practical and lightweight removable accessory which allows the locking of the cap adjusting bolt. The special design allows an extremely wide compatibility with most 1.1/4" oversize carbon or aluminum alloy steerers tubes on the market, they only should have inner diameter between 25.0 and 27.2 mm. It's 7075T6 Aluminum fully CNC made and with only 5.7 grams allows to save a lot of weight from stock headset expander systems. It's compatible with headset caps with M6 bolts. Ultrastar 4 is 100% Made in Italy.
              UD Carbon Headset Spacers, 5 and 10 mm UD Carbon Headset Spacers, 5 and 10 mm UD Carbon Headset Spacers, 5 and 10 mm

              UD Carbon Headset Spacers, 5 and 10 mm

              €2.38

              Dream Bikes ultralight carbon fibre headset spacers, UD gloss finish. 5 mm or 10 mm thickness. 1.9 gr. each (5 mm) and 3.3 gr. each (10 mm) weights. Compatible with standard 1.1/8" or tapered 1.1/2" and 1.1/4" headset tubes. Sold individually.