29" Wheels Berg Ratheberg 30 XC SL - Extralite HyperBoost3 - Alpina Hyperlite - 1070 gr.

With only 1070 grams for the pair, Berg/Extralite/Alpina wheels are some of the lightest 29" MTB tubeless ready wheels on the market. They are assembled with Berg Ratheberg 30 XC SL 295 gr. rims, Extralite HyperBoost3 hubs, Alpina Hyperlite spokes and aluminum nipples.

They're laced with straight-pull spokes (28h/28h) and Boost hubs but can also be assembled with other hub standards (for Lefty or RS-1 forks too). They're available with Shimano 11s cassette body, Sram XD 11-12s cassette body or Shimano Micro Spline 12s cassette body. 

With only 295 grams (tolerance +/- 1%) the Berg Ratheberg 30 XC SL 295 gr. are among the lightest 29" clincher rims currently on the market.

They are characterized by an external width of 35 mm and an internal channel of 30 mm with a profile height of 21 mm. The geometry with a lowered section allows to obtain rims with excellent lateral stiffness and high capacity to dampen impacts and vibrations, therefore greater resistance and better comfort.

The rim profile is asymmetrical with a 2 mm offset. The asymmetry allows a better balance of the spoke tension on both sides of the wheel to guarantee greater stability and longevity of performance (less stressed spokes and wheels that maintain tension and centering for longer).

Side walls are Hookless type, and make Ratheberg rims compatible with 29" Tubeless or Tubeless Ready tires (with tubeless conversion systems with sealants).

The Ratheberg 30 XC SL rims are available with 28h drilling with matte Unidirectional UD carbon weave and glossy black graphics under clear coat, a very nice look, elegant and racing at the same time.

The Ratheberg 30 XC SL rims are made with monolithic construction using entirely high quality carbon fiber. The generous section also guarantees great lateral stiffness and greater air volume which allows you to ride at lower operating pressures with consequent better performance (better grip and traction, greater comfort and less risk of punctures). The width of the channel allows the use of tires with section from 2.2" to 2.7" (52-69 mm). The maximum allowable pressure is 4 bar (60 PSI), while the minimum is 25-40 PSI. The maximum allowable tension for the spokes is 1100N. The maximum weight allowed for the biker is 100 kg.

Berg rims are covered by a regular 2-year warranty plus a 3-year Crash Replacement policy which includes a replacement rim at a special discounted price (-40%) in case of accidental breakage. Warranty and Crash replacement are applicable to the first owner only. In the User Manual, which you can download in the "attached documents" section of this product sheet, you can find the details of the warranty coverage.

BERG in Flemish language means "mountain" hence the particular logo, BERG is a Belgian company formed by a young and dynamic team of enthusiasts, riders, engineers and designers. The company's goal is to create products dedicated to XC, XCO and Olympic Marathon use, which are highly performing, light and reliable at the best possible price with a modern and attractive look. It is a great challenge full of stimuli and the BERG guys have what it takes and the enthusiasm necessary to achieve the set goals.

The production process first involves the design and simulation on the computer, the prototypes are then made and tested and analyzed by both the racers and the engineers, the final step is the regulatory tests performed in Germany by EFBE following the most severe procedures. The tests are repeated over time at periodic intervals of 3 months to ensure adequate quality control.

If the rims are new on the market, the hubs are a very best seller, we are talking about the famous Extralite HyperBoost 3 hubs, which are the only choice to assemble an  ultralight wheelset!

Extralite HyperBoost 3 hubs are fine mechanics masterpieces. They're made of 7075T6 aluminum ably machined to obtain smooth and sexy shapes. They've got straight-pull flanges for straight-pull spokes which allows stronger and stiffer wheels without weakness typical of j-bend spokes.

Extralite HyperBoost 3 hubs has got an hyper engineered front engagement system with 36 engagement positions for a fast and smooth action with minimal friction resistance (as option with an extra fee are available also with 48 points of engagement).

Rolling action take advantages from the use of Enduro ABEC5 stainless steel sealed bearings; this kind of material assure a longer bearing life also with severe conditions. An external bearings pre-load system allows to obtain the perfect side play for the maximum performance (rolling resistance, smoothness and lasting). Enduro HDC ceramic bearings are also available as option.

Here are all the hubs standards available :

FRONT WHEEL :

• QR15 Boost (15x110) - HyperBoost 3 F
• RS-1 Predictive Steering (15x110 mm) - HyperWiz
• Lefty 2.0/Lefty Ocho - HyperLefty 3

REAR WHEEL :

• QR12 Boost (12x148 mm) - HyperBoost 3 R

Alpina Hyperlite spokes are the top end of the famous Italian brand. They're double butted (2.0 - 1.3 - 2.0 mm) bladed aero straight-pull spokes made of special C45 carbon steel alloy which has major resistance to impact and fatigue than stainless steel alloys usually used for spokes.

Based on the 80 years Alpina's experience, Hyperlite spokes are 25% lighter than any other high-end spoke (like sapim CX-Ray etc.) with an impressive 3.25 gr. weight each. They're light but also strong and reliable, they can withstand up to 3600 N loads! 

Spoke nipples are made of aluminum and they've got hexagonal head with spherical under head for a better fitting with rim holes. These nipples has also got a special system that avoid spokes loosen.

With only 1070 grams for the pair, these wheels are some of the lightest MTB 29" clincher wheels on the market. All the weights has got 2% tolerance and are indicative, subject to modify from the manufacturers of any wheels parts.

We are talking about top level wheels! Their weight is impressive but their performance is also impressive! These wheels are not only super fast but also very stiff and super comfortable and of course strong and reliable too! 

Hubs, spokes and wheel-building are 100% made in Italy

BERG products are having a great success on the market, beyond the rosiest expectations and this has created for some products quite long waiting times, so everything that we actually have available in stock ready for delivery is marked as "IN STOCK" (just select the desired version and verify). All the other combinations have the words "TO ORDER" and consequently must be ordered specifically with very variable waiting times (they can be available for immediate delivery in the central warehouse in Belgium or in the production phase with more or less long waiting times) , we therefore always recommend contacting us so that we can check the timing with the manufacturer.

The products to be ordered (those not available for immediate delivery in our warehouse) are to be considered made and procured to order and as such fall outside the canonical right of withdrawal for remote sales and require full advance payment. The cash on delivery method is therefore excluded for these products.