Hopp Carbon Specialized Epic FS From MY2018 Frame Insert Cable Housing Cover Tuning
    Hopp Carbon Specialized Epic FS From MY2018 Frame Insert Cable Housing Cover Tuning
    Hopp Carbon Specialized Epic FS From MY2018 Frame Insert Cable Housing Cover Tuning
    Hopp Carbon Specialized Epic FS From MY2018 Frame Insert Cable Housing Cover Tuning
    Hopp Carbon Specialized Epic FS From MY2018 Frame Insert Cable Housing Cover Tuning
    Hopp Carbon Specialized Epic FS From MY2018 Frame Insert Cable Housing Cover Tuning
    Hopp Carbon Specialized Epic FS From MY2018 Frame Insert Cable Housing Cover Tuning
    Hopp Carbon Specialized Epic FS From MY2018 Frame Insert Cable Housing Cover Tuning
    Hopp Carbon Specialized Epic FS From MY2018 Frame Insert Cable Housing Cover Tuning
    Hopp Carbon Specialized Epic FS From MY2018 Frame Insert Cable Housing Cover Tuning
    Hopp Carbon Parts

    Hopp Carbon Specialized Epic FS From MY2018 Frame Insert Cable Housing Cover Tuning

    Reference: 
    €23.69

    Hopp Carbon ultralight cable housing cover for Specialized Epic FS from 2018 model. High module carbon fiber made. Replace stock aluminium made one with direct fitting. UD matte finish. Only 2,15 gr. allows about 3,25 gr. weight saving (about 60%)! Made in Germany.

    Quantity
      TO ORDER, 6-8 WEEKS

    Add to favorites Aggiungi alla comparazione

    Hopp Carbon Specialized Epic FS from MY2018 Frame Insert Tuning. It's the cover that hold cable housings in the lower down tube exit point.

    hopp carbon parts 2018 specialized epic fs cable housing cover tuning

    We are talking about very high quality material, molded with high module carbon fibers which allows a perfect reproduction of stock frame insert (aluminium made) with also a great resistance but lower weight (about 60%) and a better look too!

    hopp carbon parts 2018 specialized epic fs cable housing cover tuning

    Hopp Carbon cable housing cover is direct fit, doesn't require any modification and allows to use standard bolts & hardware. UD Unidirectional matte finishing.

    hopp carbon parts 2018 specialized epic fs cable housing cover tuning

    With only 2.15 gr. weight this beauty is perfect for tuning jobs because you can save about 3.25 gr. from 5.4 gr. stock holder, about 60% with the same reliability and safety! 

    hopp carbon parts 2018 specialized epic fs cable housing cover tuning

    Hopp Carbon cable housing cover is compatible with all Specialized Epic FS (Full Suspended) bicycles model year from 2018.

    All Hopp Carbon products are 100% Made in Germany.

    hopp carbon parts

    Product Details

    Data sheet

    Weight :
    2,15 gr.
    Material :
    Carbon fibre
    Finish :
    UD Matte
    Fitting :
    Specialized Epic FS from MY2018

    Compara

    Prodotto
    		 Hopp Carbon Coperchio Ferma Guaine Tuning Specialized Epic FS Dal 2018 Hopp Carbon Coperchio Ferma Guaine Tuning Specialized Epic FS Dal 2018 Extralite Kit frontalini Ultrastem / Roadstem Extralite Kit frontalini Ultrastem / Roadstem Carbon-Ti X-Cap Titanium Carbon-Ti X-Cap Titanium Carbon-Ti X-Plug Expander Sterzo Carbon-Ti X-Plug Expander Sterzo
    Availability
    Questo prodotto non è più disponibile
    Disponibile
    Disponibile
    Disponibile
    Prezzo
    23,69 €
    20,41 €
    16,31 €
    16,31 €
    Descrizione

    Hopp Carbon coperchio fermaguaine per Specialized Epic FS dal 2018. Realizzato in fibra di carbonio ad alto modulo, riproduce fedelmente le forme dell'originale (in alluminio). Si monta quindi semplicemente senza che sia necessaria alcuna modifica. Finitura UD opaca. Peso di soli 2,15 gr. Consente un risparmio di peso di circa 3,25 grammi ovvero circa il 60% ! Made in Germany.

    Extralite kit frontalini Ultrastem/Roadstem, composto da 2 frontalini fissaggio manubrio in Al 7075 Txx CNC (diametro 25.4 mm) . Peso di soli 6.0 - 6.5 gr a coppia. Montano su tutti gli attacchi manubrio Extralite Ultrastem e Roadstem sia strada che MTB (anche sulle versioni < 2011 su cui si possono risparmiare circa 2 gr).

    Tappo sterzo ultraleggero in Titanio grado 5 (soli 8.4 grammi vite compresa), lavorato CNC corredato da una vite Torx in lega Al7075-T6 di 30mm disponibile in diversi colori anodizzati. 100% Made in Italy.

    Carbon-Ti X-Plug expander sterzo ultraleggero interamente realizzato in alluminio CNC, con soli 14 grammi ed un ampia compatibilità consente praticità di regolazione e risparmio di peso. Adatto a tubi sterzo forcella sia in alluminio che in fibra di carboniio, si installa e si rimuove facilmente utilizzando una normalissima chiave esagonale da 8 mm. 100% Made in Italy.
    Peso :
    		 2,15 gr. 6.5 - 7.0 gr. la coppia 14 gr
    Diametro curva manubrio :
    		 25.4 mm
    Diametro tubo sterzo :
    		 1.1/8" standard
    Materiale :
    		 Fibra di carbonio Al 7075 T6 CNC Titanio grado 5 AL 7075 Txx ricavato dal pieno CNC
    Finitura :
    		 UD opaca Anodizzata vari colori Titanio naturale satinato
    Grafiche :
    		 Laser
    Viteria :
    		 Ergal 7075T6
    Compatibilità tubo sterzo :
    		 Con diametro interno compreso tra 21.2 e 25.0 mm
    Compatibilità tappo sterzo :
    		 Con vite registro diametro M6
    Compatibilità :
    		 Specialized Epic FS dal MY2018 in poi Solo con attacchi manubrio Extralite

    Non ci sono prodotti selezionati da comparare

    In the same category

    Gemini Propus Ultralight Integrated MTB XC Carbon Handlebar From 149 gr. Gemini Propus Ultralight Integrated MTB XC Carbon Handlebar From 149 gr. Gemini Propus Ultralight Integrated MTB XC Carbon Handlebar From 149 gr.
    Hopp Carbon Parts

    Gemini Propus Ultralight Integrated MTB XC Carbon Handlebar From 149 gr.

    €556.56

    Gemini Propus is the lightest and more advanced integrated MTB XC handlebar on the market, weights starts from 149 gr.  It's made with monolithic technology and the best carbon fibers available: Mitsubishi MR70. Its beautiful design is also efficient and assure great stiffness, a superior comfort and total safety/reliability. The geometry is optimized for frames with 67°- 70° head tube angle, the handlebar has got 7° backsweep, 5° upsweep and 0 mm rise, It's available in 50-60-70-80-90-100 mm length, the offset is the same for any length and can be chosen from +3 mm; -12 mm; -25 mm. 700-760 mm width and 90 kg max (Ultralight) and 700-800 mm width and 120 kg max (Performance). 12k Twill or UD finishing (matte or glossy), custom paint or decals are possible on demand, 100% Handmade in Spain!

      Ingrid Gravel Direct Mount Single Chainring Ingrid Gravel Direct Mount Single Chainring Ingrid Gravel Direct Mount Single Chainring
      Hopp Carbon Parts

      Ingrid Gravel Direct Mount Single Chainring

      €89.34

      Ingrid Gravel Direct Mount chainring compatible only with Ingrid cranks. It's made of 7075T6 aluminum alloy machined from solid with sophisticated CNC machining. The quality of the materials, the heat treatments undergone and the precision of the workmanship guarantee excellent precision, smoothness, chain retention capacity and great durability. 49.5 mm chainline (if used with 131 mm axle) or 52 mm (if used with 136 mm axle). Avaiolable with black anodized finish in 36T - 38T - 40T - 42T. weights between 86 and 101 grams. Compatible on single chainring systems with 11s-12s and 13s (Campagnolo Ekar) chains. 100% Made in Italy. 

        Darimo Carbon IX2 Ultralight Stem - 12 degrees Darimo Carbon IX2 Ultralight Stem - 12 degrees Darimo Carbon IX2 Ultralight Stem - 12 degrees
        Hopp Carbon Parts

        Darimo Carbon IX2 Ultralight Stem - 12 degrees

        €294.26

        Darimo Carbon IX2 ultralight stem, +/-12° angle, for 31.8 mm handlebars and 1.1/8" standard or 1.1/4" oversize headtubes. With weights from only 57 gr. , is one of the lightest stem in the world but it's super strong, stiff and safe at the same time. Monocoque high module carbon fiber made with special gr.5 titanium bolts. Road, MTB (XC, Enduro), CX and Gravel use. 60-70-80-90-100-110-120-130 mm lenght, 3k or UD, glossy or matte finishing, decal stickers available in many colors. 100% Made in Spain.

          THM-Carbones BSA MTB Bottom Bracket THM-Carbones BSA MTB Bottom Bracket THM-Carbones BSA MTB Bottom Bracket
          Hopp Carbon Parts

          THM-Carbones BSA MTB Bottom Bracket

          €106.56

          THM-Carbones BSA 68-73 mm MTB bottom bracket compatible with Clavicula XC and M3 cranks with 30 mm axle diameter. This axle diameter in combination with the external bearings increase the stiffness of the cranks and extend the service life of the bearings. BB cups are made of aluminum CNC machined with BSA long threads (compatible with 68 mm or 73 mm BSA threaded frames) and then black anodized, bearings are high quality steel ones and also 3 aluminum compensating spacers are provided with the BB. Only 77 gr. weight (80 gr. included the spacers). Installation require THM BB tool.

            Carbon-Ti X-Ring Evo BCD 104 mm Ultralight Aluminium Mono-Ring Carbon-Ti X-Ring Evo BCD 104 mm Ultralight Aluminium Mono-Ring Carbon-Ti X-Ring Evo BCD 104 mm Ultralight Aluminium Mono-Ring
            Hopp Carbon Parts

            Carbon-Ti X-Ring Evo BCD 104 mm Ultralight Aluminium Mono-Ring

            €51.56

            Carbon-Ti X-Ring EVO ultralight mono-ring with synchronized teeth, Aluminium CNC made, compatible with 11-12 speed drivetrain (Sram and Shimano both). The "narrow wide" synchronized teeth allows it to work even without the chain guide. The maximum reliability is guaranteed only with rear derailleurs with clutch as SRAM XX1 AXS, XX1 Eagle, XX1, X01 Eagle, X01, X1, GX, X0, X9 Type 2 or Shimano Shadow Plus. 7075T6 Aluminium assure a longer lasting than standard aluminum chainrings. Available in 30T (27 gr.) - 32T (34 gr.) - 34T (42 gr.) - 36T (47 gr.) - 38T (57 gr.), compatible with cranks with 4 holes 104 mm BCD spider ( Powermeter SRM and Quarq Sram XX1 Eagle included). 100% Made in Italy.

              Extralite UltraTop 42 Extralite UltraTop 42 Extralite UltraTop 42
              Hopp Carbon Parts

              Extralite UltraTop 42

              €81.15

              Extralite UltraTop 42 semi-integrated (Press-Fit internal cup) upper headset for 1.1/8"-1.1/2" standard or tapered forks. With high quality angular contact bidirectional stainless steel micro bearing. Only 13.8 gr weight. Compatibie with 42 mm inner diameter upper head tube bore frames. Made in Italy.

                GrigioCarbonio Attack T1000 Carbon Stem, The Lightest In The World! GrigioCarbonio Attack T1000 Carbon Stem, The Lightest In The World! GrigioCarbonio Attack T1000 Carbon Stem, The Lightest In The World!
                Hopp Carbon Parts

                GrigioCarbonio Attack T1000 Carbon Stem, The Lightest In The World!

                €613.93

                GrigioCarbonio Attack T1000 ultralight stem, +/-6° or +/-17° angle, for 31.8 mm handlebars and 1.1/8" standard headtube. With only 55 gr. weight (70 mm), is the lightest stem in the world but it's super strong, stiff and safe at the same time. Monocoque high module carbon fiber made with special gr.5 titanium bolts. Road, MTB (XC, Enduro), CX and Gravel use. 70-80-90-100-110-120 mm lenght, 12k or UD, glossy or matte finishing, decal stickers and hardware available in many colors. 100% Made in Italy.

                  Ceramic Bearing Kit (4x) for Extralite UltraPulley Jockey Wheels
                  Hopp Carbon Parts

                  Ceramic Bearing Kit (4x) for Extralite UltraPulley Jockey Wheels

                  €36.07

                  Extralite Ceramic Bearing kit (4x) for Extralite UltraPulley Jockey Wheels series (11-11 / 12-12 / 12-12 PH / 13-13 / 12-14 PH). HYC Hyper Ceramic bearings double 2RS sealed super smooth, fast, quiet and durable. Only 1.5 gr. weight each (6 gr. for the kit). Not compatible with other Jockey Wheels, we remember that Extralite UltraPulleys are the unique with double bearing for each Jockey Wheel.

                    Darimo Carbon Sub4 Seatpost Seat Clamp Darimo Carbon Sub4 Seatpost Seat Clamp Darimo Carbon Sub4 Seatpost Seat Clamp
                    Hopp Carbon Parts

                    Darimo Carbon Sub4 Seatpost Seat Clamp

                    €56.56

                    Darimo Carbon Sub4 ultralight seatpost seat clamp with carbon fiber monocoque body and titanium grade 5 bolt. With less than 4 grams is the lightest seatpost seat clamp in the world. Available in several diameters with UD matte finishing and black hardware. Made in Spain.

                      MCFK Carbon Seatpost 5 mm Offset MCFK Carbon Seatpost 5 mm Offset
                      Hopp Carbon Parts

                      MCFK Carbon Seatpost 5 mm Offset

                      €204.10

                      MCFK ultralight carbon fiber seatpost, made in Germany with best materials and tecnologies, new model allows a wider range of adjusting for a lower price. 5 mm offset. Available in 25.4-27.2-30.9-31.6 mm diameter with 320 mm or 420 mm lenght, natural carbon 3K gloss finishing (while stocks last) or UD (unidirectional) matte, weights from 115 gr. 

                        Alpitude Brandtal ODC - 12s Rear Derailleur Carbon Cage with Oversize Pulleys and Ceramic Bearings - From 69 gr. Alpitude Brandtal ODC - 12s Rear Derailleur Carbon Cage with Oversize Pulleys and Ceramic Bearings - From 69 gr. Alpitude Brandtal ODC - 12s Rear Derailleur Carbon Cage with Oversize Pulleys and Ceramic Bearings - From 69 gr.
                        Hopp Carbon Parts

                        Alpitude Brandtal ODC - 12s Rear Derailleur Carbon Cage with Oversize Pulleys and Ceramic Bearings - From 69 gr.

                        €319.67

                        Alpitude Brandtal ODC complete cage kit for 12s rear derailleurs (Shimano or Sram). Side cages are made of carbon fiber and has got a semi-aero closed design, the jockey wheels are Oversize 14-17T and are made of CNC machined aluminum and has got super smooth ceramic bearings. Superior overall quality and great attention to detail, it guarantees better performance in terms of smoothness, stiffness, shifting precision, aerodynamic efficiency and weight saving as well as adding a touch of personality thanks to its attractive design. Available in two versions, one compatible with Shimano 12s Di2 rear derailleurs (DuraAce and Ultegra) and another version compatible with Sram 12s AXS rear derailleurs. Just 69 gr. (Shimano) or 75 gr. (Sram) weight. UD carbon fiber finish with 4 different anodized colors for aluminum jockey wheels and cage side insert (black, gold, turquoise, gun metal). 100% Handmade in Italy!

                        • New
                        Carbon-Ti X-SyncroCam Ti BCD 76 mm Asymmetric Titanium Black Monoring Carbon-Ti X-SyncroCam Ti BCD 76 mm Asymmetric Titanium Black Monoring Carbon-Ti X-SyncroCam Ti BCD 76 mm Asymmetric Titanium Black Monoring
                        Hopp Carbon Parts

                        Carbon-Ti X-SyncroCam Ti BCD 76 mm Asymmetric Titanium Black Monoring

                        €81.15

                        Carbon-Ti X-SyncroCam Ti, ultralight asymmetrical monoring with synchronized teeth, CNC made, compatible with 9-10-11-12 speed drivetrain. The special variable geometry allows a quicker overcoming of the dead spots and provides a more efficient and powerful pedal stroke. The "narrow wide" synchronized teeth allows it to work even without the chain guide. The maximum reliability is guaranteed only with rear derailleurs with clutch as SRAM XX1, X01, X1, GX, X0, X9 Type 2 or Shimano Shadow Plus. Grade 5 Titanium assure a three time longer lasting than aluminum chainrings. Available in 76 BCD  30T (45 gr.) - 32T (49 gr.) - 34T (54 gr.). 100% Made in Italy.

                          Darimo Carbon T1 Aero Ultralight Seatpost - Various Models
                          Hopp Carbon Parts

                          Darimo Carbon T1 Aero Ultralight Seatpost - Various Models

                          €261.48

                          Darimo Carbon T1 Aero is the most famous aftermarket seatpost in the world specific for the most important bicycles on the market. It's made of high module carbon fiber with Aluminium 7075T6 and Gr.5 Titanium hardware. High quality materials, super optimized design, FEM analysis and lab testing makes T1 Aero not only ultralight but also safe and reliable (ISO 4210 safety tested). Available in 250-300-350-400 mm lengths, carbon fiber 3k twill natural finishing or unidirectional UD (matte or glossy), many colors decal. Compatible with 7x7 or 7x9 saddle rails both. 95 kg max rider weight (also more on demand). 100% Made in Spain.

                          • New
                          GrigioCarbonio HardWheel AS25 T800 3K Carbon 29" Clincher Rim 315 gr. GrigioCarbonio HardWheel AS25 T800 3K Carbon 29" Clincher Rim 315 gr. GrigioCarbonio HardWheel AS25 T800 3K Carbon 29" Clincher Rim 315 gr.
                          Hopp Carbon Parts

                          GrigioCarbonio HardWheel AS25 T800 3K Carbon 29" Clincher Rim 315 gr.

                          €581.15

                          GrigioCarbonio Hardwheel AS25 ultralight MTB 29" rim for tubeless or tubeless ready tires. Asymmetrical profile (3 mm offset), 25 mm height, 29 mm width (25 mm inner channel). Monocoque fully made with high module T800 carbon fiber, great technology and superior attention to details. With only 315 grams of weight is one the lightest clincher MTB rim on the market, but is extremely strong and reliable too and hasn't got any rider weight limit. 24h-28h-32h drilling, 3k Twill fiber fabric, glossy or matte finishing, sticker decals in many colors. 100% Made in Italy.

                            Carbon-Ti X-SyncroCam Ti BCD 76 mm Asymmetric Titanium Monoring Carbon-Ti X-SyncroCam Ti BCD 76 mm Asymmetric Titanium Monoring Carbon-Ti X-SyncroCam Ti BCD 76 mm Asymmetric Titanium Monoring
                            Hopp Carbon Parts

                            Carbon-Ti X-SyncroCam Ti BCD 76 mm Asymmetric Titanium Monoring

                            €81.15

                            Carbon-Ti X-SyncroCam Ti, ultralight asymmetrical monoring with synchronized teeth, CNC made, compatible with 9-10-11-12 speed drivetrain. The special variable geometry allows a quicker overcoming of the dead spots and provides a more efficient and powerful pedal stroke. The "narrow wide" synchronized teeth allows it to work even without the chain guide. The maximum reliability is guaranteed only with rear derailleurs with clutch as SRAM XX1, X01, X1, GX, X0, X9 Type 2 or Shimano Shadow Plus. Grade 5 Titanium assure a three time longer lasting than aluminum chainrings. Available in 76 BCD  30T - 34T. Weight : 45 gr. (30T) - 54 gr. (34T). Natural titanium satin finish or black. 100% Made in Italy.

                              Viewed products

                              Darimo Carbon Ellipse Road Handlebar From 121 gr. Darimo Carbon Ellipse Road Handlebar From 121 gr. Darimo Carbon Ellipse Road Handlebar From 121 gr.
                              Hopp Carbon Parts

                              Darimo Carbon Ellipse Road Handlebar From 121 gr.

                              €327.05

                              Darimo Carbon Ellipse, with weights from only 121 gr. is the lightest Road handlebar in the world!. It's made of high module monocoque carbon fiber, super optimized in design and lamination, has got compact shape with 77 mm reach and 128 mm drop. FEM analysis and lab testing makes it not only ultralight but also safe and reliable (ISO 4210-2 safety tested). Available in 31.8 mm oversize diameter and 38-40-42-44 cm widths (c/c), carbon fiber 3k twill natural finishing or unidirectional UD (matte or gloss) with many decal color options. Road, Gravel, CX use compatible with 90 kg max rider weight (also without limitations on demand). 100% Made in Spain.

                                GrigioCarbonio Vivax 9° T800 Ultralight Carbon Handlebar 3K or UD GrigioCarbonio Vivax 9° T800 Ultralight Carbon Handlebar 3K or UD GrigioCarbonio Vivax 9° T800 Ultralight Carbon Handlebar 3K or UD
                                Hopp Carbon Parts

                                GrigioCarbonio Vivax 9° T800 Ultralight Carbon Handlebar 3K or UD

                                €204.10

                                Grigiocarbonio Vivax ultralight T800 high module carbon fibre MTB flatbar, 9° backsweep, from 600 mm to 780 mm width. 31.8 mm oversize clamp diameter, not compatible with barends. 116 gr. weight (740 mm). Overall great quality and details care, beautiful design, high stiffness and performance and extreme safety (UNI EN 14766/2006 certified) withstand up to 375 kg!. Safety clip patented system. 3K Twill or UD mesh, glossy or matte finishing. 100% Handmade in Italy!