Carbon-Ti X-Plug OS 1.1/4" Steerer Expander

€18.77

Carbon-Ti X-Plug OS ultralight steerer expander for 1.1/4" oversize steerer tubes. Fully CNC aluminium made, only 17 grams, allows to save a lot of weight. Very easy to install and remove, you just need an 8 mm allen hex key,  compatible with steerer tubes with inner diameter from 24.0 to 28.0 mm, carbon fiber or aluminium ones both. 100% Made in Italy.

• Out-of-Stock

Carbon-Ti X-Plug Steerer Expander

€16.31

Carbon-Ti X-Plug steerer expander is a practical and lightweight removable accessory which allows the locking of the headset cap adjusting bolt. The special design allows an extremely wide compatibility with most 1.1/8" carbon or aluminum alloy steerers on the market, they only should have inner diameter between 21.2 and 25.0 mm. It's 7075T6 Aluminum fully CNC made and with only 14 grams allows to save a lot of weight from stock headset expander systems. It's compatible with headset caps with M6 bolts and could be installed with an 8 mm hex wrench key. 100% Made in Italy.

Carbon-Ti X-Ring Evo BCD 104 mm Ultralight Aluminium Mono-Ring

€51.56

Carbon-Ti X-Ring EVO ultralight mono-ring with synchronized teeth, Aluminium CNC made, compatible with 11-12 speed drivetrain (Sram and Shimano both). The "narrow wide" synchronized teeth allows it to work even without the chain guide. The maximum reliability is guaranteed only with rear derailleurs with clutch as SRAM XX1 AXS, XX1 Eagle, XX1, X01 Eagle, X01, X1, GX, X0, X9 Type 2 or Shimano Shadow Plus. 7075T6 Aluminium assure a longer lasting than standard aluminum chainrings. Available in 30T (27 gr.) - 32T (34 gr.) - 34T (42 gr.) - 36T (47 gr.) - 38T (57 gr.), compatible with cranks with 4 holes 104 mm BCD spider ( Powermeter SRM and Quarq Sram XX1 Eagle included). 100% Made in Italy.

Carbon-Ti X-Rotor SteelCarbon 3 Brake Rotor

€136.80

Carbon-Ti X-Rotor SteelCarbon 3, superlight semi-floating disc rotor with steel braking surface (replaceable and regenerable), carbon fiber inner body and laser etched titanium fixing rivets. The braking surface has a special design that reduces wear of the pads ensuring optimum braking power and heat dissipation. Profile with rounded CNC-machined edges that increase safety and comply with the UCI regulations. Can be used with any kind of pads (organic recommended). Available in 140-160-180 mm diameter with 6 holes I.S fixing (Center Lock with the use of special adapters as an option). Weights from 68 gr. 100% Made in Italy.

Carbon-Ti X-Rotor SteelCarbon 3 Center Lock Disc Brake Rotor

€162.30

Carbon-Ti X-Rotor SteelCarbon 3 Center Lock, superlight semi-floating disc rotor with steel braking surface (replaceable and regenerable), carbon fiber inner body and laser etched titanium fixing rivets and protection plate, 7075T6 CNC aluminum Center Lock adapter. The braking surface has a special design that reduces wear of the pads ensuring optimum braking power and heat dissipation. Profile with rounded CNC-machined edges that increase safety and comply with the UCI regulations. Can be used with any kind of pads (organic recommended). Available in 140-160-180 mm diameter with Center Lock fixing (also compatible with 6 holes I.S. without the use of the Center Lock adapter). Used by Pogacar and UAE Team at Giro d'Italia and Tour de France. Weights from 86 gr. 100% Made in Italy.

Carbon-Ti X-Rotor Titanium Bolt Kit

€16.31

Titanium rotor fixing bolt kit, superlight, low profile forged head, Torx T25 Socket, rolled threads. 6 pieces (for one wheel). 100% Made in Italy.

Carbon-Ti X-SyncroCam Ti BCD 76 mm Asymmetric Titanium Black Monoring

€81.15

Carbon-Ti X-SyncroCam Ti, ultralight asymmetrical monoring with synchronized teeth, CNC made, compatible with 9-10-11-12 speed drivetrain. The special variable geometry allows a quicker overcoming of the dead spots and provides a more efficient and powerful pedal stroke. The "narrow wide" synchronized teeth allows it to work even without the chain guide. The maximum reliability is guaranteed only with rear derailleurs with clutch as SRAM XX1, X01, X1, GX, X0, X9 Type 2 or Shimano Shadow Plus. Grade 5 Titanium assure a three time longer lasting than aluminum chainrings. Available in 76 BCD  30T (45 gr.) - 32T (49 gr.) - 34T (54 gr.). 100% Made in Italy.

Carbon-Ti X-SyncroCam Ti BCD 76 mm Asymmetric Titanium Monoring

€81.15

Carbon-Ti X-SyncroCam Ti, ultralight asymmetrical monoring with synchronized teeth, CNC made, compatible with 9-10-11-12 speed drivetrain. The special variable geometry allows a quicker overcoming of the dead spots and provides a more efficient and powerful pedal stroke. The "narrow wide" synchronized teeth allows it to work even without the chain guide. The maximum reliability is guaranteed only with rear derailleurs with clutch as SRAM XX1, X01, X1, GX, X0, X9 Type 2 or Shimano Shadow Plus. Grade 5 Titanium assure a three time longer lasting than aluminum chainrings. Available in 76 BCD  30T - 34T. Weight : 45 gr. (30T) - 54 gr. (34T). Natural titanium satin finish or black. 100% Made in Italy.

Ceramic Bearing Kit (4x) for Extralite UltraPulley Jockey Wheels

€36.07

Extralite Ceramic Bearing kit (4x) for Extralite UltraPulley Jockey Wheels series (11-11 / 12-12 / 12-12 PH / 13-13 / 12-14 PH). HYC Hyper Ceramic bearings double 2RS sealed super smooth, fast, quiet and durable. Only 1.5 gr. weight each (6 gr. for the kit). Not compatible with other Jockey Wheels, we remember that Extralite UltraPulleys are the unique with double bearing for each Jockey Wheel.

Cruel Components VoR BCD 104 mm Ultralight Aluminium Mono-Ring

€49.10

Cruel Components VoR ultralight mono-ring chainring with synchronized teeth, Aluminium CNC made, compatible with 10-11-12 speed drivetrain (Sram and Shimano both). The "narrow wide" synchronized teeth allows it to work even without the chain guide. The maximum reliability is guaranteed only with rear derailleurs with clutch as SRAM XX1 AXS, XX1 Eagle, XX1, X01 Eagle, X01, X1, GX, X0, X9 Type 2 or Shimano Shadow Plus. 7075T6 Aluminium assure a longer lasting than standard aluminum chainrings. Available in 30T - 32T - 34T - 36T , black, gold or red anodized finish with milled graphics. Compatible with cranks with 4 holes 104 mm BCD spider ( Powermeter SRM and Quarq Sram XX1 Eagle included). Integrated female threaded chainring fixing bolts. 44 gr. weight (34T). 100% Made in Italy.

Darimo Carbon 6° Ultralight Flatbar From 79 gr.

€154.92

Darimo Carbon 6° Flatbar, with weights from only 79 gr. is the lightest MTB handlebar in the world!. It's made of high module monocoque carbon fiber, super optimized in design and lamination. FEM analysis and lab testing makes it not only ultralight but also safe and reliable (ISO 4210 safety tested). Available in 31.8 mm oversize diameter and widths up to 800 mm, carbon fiber 3k twill natural finishing or unidirectional UD (matte or gloss) with many decal color options. MTB XC use compatible with 90 kg max rider weight (also without limitations on demand). 100% Made in Spain.

Darimo Carbon 9° Ultralight Flatbar From 79 gr.

€154.92

Darimo Carbon 9° Flatbar, with weights from only 79 gr. is the lightest MTB handlebar in the world!. It's made of high module monocoque carbon fiber, super optimized in design and lamination. FEM analysis and lab testing makes it not only ultralight but also safe and reliable (ISO 4210 safety tested). Available in 31.8 mm oversize diameter and widths up to 800 mm, carbon fiber 3k twill natural finishing or unidirectional UD (matte or gloss) with many decal color options. MTB XC use compatible with 90 kg max rider weight (also without limitations on demand). 100% Made in Spain.

Darimo Carbon IX2 Ultralight Stem - 12 degrees

€294.26

Darimo Carbon IX2 ultralight stem, +/-12° angle, for 31.8 mm handlebars and 1.1/8" standard or 1.1/4" oversize headtubes. With weights from only 57 gr. , is one of the lightest stem in the world but it's super strong, stiff and safe at the same time. Monocoque high module carbon fiber made with special gr.5 titanium bolts. Road, MTB (XC, Enduro), CX and Gravel use. 60-70-80-90-100-110-120-130 mm lenght, 3k or UD, glossy or matte finishing, decal stickers available in many colors. 100% Made in Spain.

Darimo Carbon IX2 Ultralight Stem - 6 degrees

€294.26

Darimo Carbon IX2 ultralight stem, +/-6° angle, for 31.8 mm handlebars and 1.1/8" standard or 1.1/4" oversize headtubes. With weights from only 57 gr. , is one of the lightest stem in the world but it's super strong, stiff and safe at the same time. Monocoque high module carbon fiber made with special gr.5 titanium bolts. Road, MTB (XC, Enduro), CX and Gravel use. 60-70-80-90-100-110-120-130 mm lenght, 3k or UD, glossy or matte finishing, decal stickers available in many colors. 100% Made in Spain.

Darimo Carbon IX2AL Ultralight CNC Aluminum Stem

€163.11

Darimo Carbon IX2AL ultralight CNC 7075T6 Aluminum stem, for 31.8 mm handlebars and 1.1/8" steering tubes. With weights from only 52 gr. is one of the lightest stem in the world but it's super strong, stiff and safe at the same time. The special design with closed front end assure a bigger surface contact with the handlebar and a superior stiffness with a stunning look too! Equipped with special gr.5 titanium bolts. MTB (XC, Marathon), Road Racing, Gravel and CX use. Available in 40-50-60-70-80-90-100-110-120-130 mm lenghts, and -6°/-12°/-17°/-25° angles, with natural aluminum or black anodized (bright or matte) finishing.  CNC engraved graphics. 100% Made in Spain.

Darimo Carbon Sub4 Seatpost Seat Clamp

€56.56

Darimo Carbon Sub4 ultralight seatpost seat clamp with carbon fiber monocoque body and titanium grade 5 bolt. With less than 4 grams is the lightest seatpost seat clamp in the world. Available in several diameters with UD matte finishing and black hardware. Made in Spain.

Darimo Carbon T1 Loop The Lightest Seatpost In The World!

€245.08

Darimo Carbon T1 Loop seatpost, with weights from only 61 gr. is the lightest one in the world!. It's made of high module carbon fiber with Aluminium 7075T6 and Gr.5 Titanium hardware and with innovative Dyneema clamping system. High quality materials, super optimized design, FEM analysis and lab testing makes T1 not only ultralight but also safe and reliable (ISO 4210 safety tested). Available in 25.4-27.2-30.9-31.6-34.9 mm diameter with lenghts up to 500 mm, carbon fiber 3k twill natural finishing or unidirectional UD (matte or gloss), many colors decal. MTB, Road and Cross use compatible with 90 kg max rider weight (also more on demand). 100% Made in Spain.

Darimo Carbon T2 SB Ultralight Seatpost With 15 mm Offset

€269.67

Darimo Carbon T2 SB 15 mm is the lightest setback seatpost in the world!. Only 117 grams in 400 mm length with 15 mm offset. It's made of high module carbon fiber with Aluminium 7075T6 and Gr.5 Titanium hardware. High quality materials, super optimized design, FEM analysis and lab testing makes T2 SB 15 mm not only ultralight but also safe and reliable (ISO 4210 safety tested). Available in 27.2-30.9-31.6 mm diameter with lengths up to 700 mm, carbon fiber 3k twill natural finishing or unidirectional UD (matte or glossy), many colors decal. MTB, Road and Cross use compatible with 90 kg max rider weight (also more on demand). 100% Made in Spain.

Darimo Carbon T2 SB Ultralight Seatpost With 25 mm Offset

€269.67

Darimo Carbon T2 SB 25 mm is the lightest setback seatpost in the world!. Only 115 grams in 31.6 x 400 mm with 25 mm offset. It's made of high module carbon fiber with Aluminium 7075T6 and Gr.5 Titanium hardware. High quality materials, super optimized design, FEM analysis and lab testing makes T1 not only ultralight but also safe and reliable (ISO 4210 safety tested). Available in 25.4-27.2-30.9-31.6 mm diameter with lenghts up to 500 mm, carbon fiber 3k twill natural finishing or unidirectional UD (matte or gloss), many colors decal. MTB, Road and Cross use compatible with 90 kg max rider weight (also more on demand). 100% Made in Spain.

E*Thirteen E*Spec Race Carbon E-Bike Cranks Gen4 Bosch/Brose/Fazua/TQ

€327.05

E*Thirteen E*Spec Race Carbon Gen4 ultralight carbon fiber cranks for E-Bike (Bosch Gen4 CX / Brose S Mag / Fazua Ride 50 Evation / TQ HPR50). Comes from the great experience of TRSr cranks in Enduro World Series, with only 390 grams for the pair (160 mm, bolts included) allows not only a weight saving but also greater stiffness and a better looks thanks to oversize design. They fit great with modern E-Bikes due to reduced thickness and low Q-Factor, they are very easy to install and remove thanks to the integrated self-extractor. Comes with protective silicone end boots and protective film on cranks sides. 160-165-170 mm lengths.

Extralite Aliens 3

€97.54

Extralite Aliens 3 ultralight quick release wheel skewers with Gr.5 titanium axles and Al7075T6 levers. Superbe machining and shaping. Extremely reliable although their only 55 gr. weight for the pair. Available in 6 beautiful anodized colors. Compatible with standard QR9 100 mm and QR10 130-135 mm Road or MTB hubs both.

Extralite Alugrease Super 1 50 ml

€7.38

Extralite Alugrease Super 1 high performance grease specific for free-wheel hubs lubrification. Highly recommended for Extralite hubs will works also for other hubs and applications where a soft grease is required. 50 ml (60 gr.) tube. 

Extralite bar clamps kit for Ultrastem

€20.41

Extralite bar clamps kit for Ultrastem/Roadstem, include 2 Al 7075 Txx full CNC made bar clamps (25.4 mm diameter). Weights only 6.0 - 6.5 gr for the pair. The kit is compatible with all kind of Ultrastem and Roadstem (MTB and road both) and if installed on <2011 Ultrastems will save about 2 grams. Not compatible with oversize 31.8 mm stem like Ultrastem OC, Roadstem OC and Hyperstem.

Extralite BlackLock QR12 Rear Wheel Thru Axle 12 mm

€64.75

Extralite BlackLock QR12 ultralight 12 mm rear thru axle for frames with Shimano E-Thru, Specialized X-12; Rock Shox Maxle and Scott standard 142 mm or 148 mm Boost both. Fully CNC Al 7075T6 made, black anodized with laser etched graphics. Bronze washer for smooth action. Weights from 29 gr, allows to save up to 50 gr.  Locks with 6 mm hex wrench.

Extralite BlackLock QR15 Front Wheel Thru Axle 15 mm

€64.75

Extralite BlackLock QR15 ultralight 15 mm thru axle for DT Swiss, Fox, (also Boost) Rock Shox (also Boost) or Magura forks. Fully CNC Al 7075T6 made, black anodized with laser etched graphics. Bronze washer for smooth action. Weights from 25 gr, allows to save up to 50 gr.  Locks with 6 mm hex wrench (BlackLock 15.1 with 8 mm hex wrench).

Extralite CH-02 Computer Holder For HyperStem

€97.54

Extralite CH-02 ultralight computer holder specific for HyperStem. Made of T700 carbon fiber with Aluminum 7075Txx clamps, adds only 16.8 grams to HyperStem. Comes with Garmin support compatible with computers up to Edge 1030 size or Wahoo. Can be used also with other computer brands but require specifc support. Go-Pro mount as an option. 100% Made in Italy.

Extralite ExtraBolt 1 Ultralight Chainring Bolts Kit (4 Males + 4 Females)

€19.67

Extralite ExtraBolt 1 ultralight chainring bolts kit which contains 4 males (M8x0.75) with standard thickness (7 mm) and 4 females (M10x0.75) with standard thickness (6 mm). 7075T6 Aluminium CNC made with T30 Torx (males) and 6 mm allen (females) key insert, only 7.2 grams weight (complete set). Available in several anodized colors with "Extra Bolt" laser engraved logo. It's a specific kit for double or triple drivetrains (works also for some single drivetrains where there is a thick spider or a power meter), Road Racing or MTB both and works on 4 holes chainrings (also with 5 holes chainrings if the cranks comes equipped with a proprietary chainring bolt, like Extralite QRC-3 cranks). Extralite ExtraBolt 1 are 100% Made in Italy.

Extralite ExtraBolt 18 Ultralight Center Lock Disc Brake Rotor Locking Ring 5.45 gr.

€23.77

Extralite ExtraBolt 18 ultralight Center Lock disc brake rotor locking ring. Made of 7075T6 CNC aluminium, thanks to the super refined design weighs only 5.45 grams and it's one of the lightest on the market and allows a weight saving of over 30% compared to the original Shimano one. Compatible with all Center Lock hubs and disc brake rotors. Comes in black or silver anodized finishing with the laser engraved "Extralite" logo. Can be tightened with a Shimano TL-UN70 type wrench or with a compass tightening wrench with 3 mm diameter pins (maximum tightening torque 30 Nm, thread length 5.3 mm). The package include a single ring nut, so for a complete bicycle you will need to purchase two. 100% Made in Italy.

• New

Extralite ExtraBolt 3.3 Cassette Lockring

€15.57

Extralite ExtraBolt 3.3 cassette lockring. 100% CNC made, aluminum 7075 T6, available in several anodized colours with laser etched graphics. Only 3.4 gr. weight, compatible 11T and 12T first gear both and Shimano 9-10-11 s and Sram 9-10 s.

Extralite ExtraBolt 4.5 Brake Caliper Bolts

€23.77

Extralite ExtraBolt 4.5 : titanium bolts set for Post-Mount brake calipers. Each kit contain 4 pcs T30 torx grade 5 titanium bolts. Complete kit weight is only 9.2 gr.

Extralite ExtraBolt 4.5 Brake Caliper Titanium Bolts Black

€28.69

Extralite ExtraBolt 4.5 : titanium bolts set for Post-Mount brake calipers. Each kit contain 4 pcs T30 torx grade 5 titanium bolts with forged head, rolled threads and integrated washers. Complete kit weight is only 9 gr. Black PVD finishing.

Extralite ExtraBolt 9.1 Brake Rotor Titanium Bolts Kit Black

€28.69

Extralite ExtraBolt 9.1 : titanium bolts set for International Standard brake rotors. Each kit contain 6 pcs T20 torx grade 5 titanium bolts with forged head and rolled threads. Complete kit weight is only 5 gr. Black PVD finishing.

Extralite Hyper BB BSA MTB/Road Racing Bottom Bracket From 65 gr.

€59.02

Extralite Hyper BB BSA 68-73 mm MTB/Road racing bottom bracket compatible with 29 mm (DUB) or 30 mm axle diameter cranks. This axle diameter in combination with the external bearings increase the stiffness of the cranks and extend the service life of the bearings. BB cups are made of aluminum CNC machined with BSA threads (compatible with 68 mm or 73 mm BSA threaded frames) and then black anodized, bearings are high quality ones and are available with some options (ABI-Enduro Standard, ABI-Enduro Stainless, HyC HyperCeramic, XD-15 Ceramic). Only 65 gr. weight (with HyC Hyper Ceramic bearings). Installation (from inside BB shell) require cartridge type BB tools (Octalink, ISIS, etc.).

Extralite HyperBoost3 F MTB Boost Front Hub 74 gr.

€163.11

Weighing just 74 grams, the Extralite HyperBoost3 F hub is the lightest Boost front hub in the world!. It's a straight pull hub with flanges for 24 or 28 spokes and is made entirely of 7075Txx aluminum with refined CNC machining, equipped with a 17 mm diameter axle optimized with variable thickness. Comes with two 6803 2RS stainless steel bearings but  as an option is possible to get ceramic or ceramic hybrid bearings and the oversized disc side bearing (6903 2RS). There's an external regulator ring for adjusting the axial bearing pre-load and side play. Disc brake rotor attach is 6 holes International Standard. The hub is compatible with Boost forks (110 x 15 mm). Black anodized finish with laser graphics. The HyperBoost3 F is 100% Made in Italy.

Extralite HyperBoost3 R MTB Boost Rear Hub 148 gr.

€400.82

Weighing just 148 grams, the Extralite HyperBoost3 R hub is the lightest Boost rear hub in the world!. It's a straight pull hub for 24 or 28 spokes and is made entirely of 7075Txx aluminum with refined CNC machining, equipped with a 17 mm axle optimized with variable thickness. Direct front engagement freehub system 36T or 48T, Shimano MTB 11s, Sram XD 11-12s, Shimano MicroSpline 12s. Comes with stainless steel bearings but as an option is possible to get ceramic or ceramic hybrid bearings and the oversized 6903 disc side bearing. External regulator ring for axial bearing pre-load/side play adjusting. Disc brake rotor attach is 6 holes International Standard. The hub is compatible with Boost frames (148 x 12 mm). Black anodized finish with laser graphics. 100% Made in Italy.

Extralite HyperCap Headset Cap

€23.77

Extralite HyperCap, headset cap for 1.1/8" standard stems. Fully alu 7075 T6 CNC machined, available in ten beautiful anodized colours with "pin-up" logo laser etching. Only 2.9 grams (ergal preload special bolt included).