• Out-of-Stock
Carbon-Ti X-Plug OS 1.1/4" Steerer Expander
Carbon-Ti X-Plug OS 1.1/4" Steerer Expander
Carbon-Ti X-Plug OS 1.1/4" Steerer Expander
Carbon-Ti X-Plug OS 1.1/4" Steerer Expander
Carbon-Ti X-Plug OS 1.1/4" Steerer Expander
Carbon-Ti X-Plug OS 1.1/4" Steerer Expander
Carbon-Ti X-Plug OS 1.1/4" Steerer Expander
Carbon-Ti X-Plug OS 1.1/4" Steerer Expander
Carbon-Ti X-Plug OS 1.1/4" Steerer Expander
Carbon-Ti X-Plug OS 1.1/4" Steerer Expander
Carbon-Ti X-Plug OS 1.1/4" Steerer Expander
Carbon-Ti X-Plug OS 1.1/4" Steerer Expander
Carbon-Ti X-Plug OS 1.1/4" Steerer Expander
Carbon-Ti X-Plug OS 1.1/4" Steerer Expander
Carbon-Ti X-Plug OS 1.1/4" Steerer Expander
Carbon-Ti X-Plug OS 1.1/4" Steerer Expander
Carbon-Ti

Carbon-Ti X-Plug OS 1.1/4" Steerer Expander

Reference: 
€18.77

Carbon-Ti X-Plug OS ultralight steerer expander for 1.1/4" oversize steerer tubes. Fully CNC aluminium made, only 17 grams, allows to save a lot of weight. Very easy to install and remove, you just need an 8 mm allen hex key,  compatible with steerer tubes with inner diameter from 24.0 to 28.0 mm, carbon fiber or aluminium ones both. 100% Made in Italy.

Quantity
  Out-of-Stock

Add to favorites Add to compare

Carbon-Ti X-Plug OS expander is an useful and ultralight accessory for your bicycle, it's removable and allows to fix the headset cap bolt and adjust headset preload.

Carbon-Ti X-Plug OS 1.1/4" Steerer Expander

X-Plug OS special design assure a wide range of compatibility with most of 1.1/4" Oversize steerer tubes on the market, carbon fiber made or aluminium made both. Can be used on road racing bicycles, gravel and mountain bikes. 

X-Plug OS expander is compatible with steering tubes with an inner diameter from 24.0 to 28.0 mm and with headset caps which are equipped of M6 bolts.

Carbon-Ti X-Plug OS 1.1/4" Steerer Expander

X-Plug OS expander is very easy and fast to install, only an 8 mm allen hex key is required to do the job. After the headset adjusting you can also remove X-Plug OS expander and save some additional weight. You can use X-Plug OS expander on many bicycles, if you own more than one, or use it for future bicycles.

Carbon-Ti X-Plug OS 1.1/4" Steerer Expander

X-Plug OS is lighter and easier to install and remove than classic steel star nuts (1), when you install and remove it you don't damage the steerer tubes and the expander itself so you can reuse it many times. Star nuts (1) aren't compatible with carbon fiber steerer tubes,require special tools for installation and removal, removing the star nut isn't easy and usually damage the inner side of the steering tube.

Carbon-Ti X-Plug OS 1.1/4" Steerer Expander

X-Plug OS allows to save a lot of weight (even more than 70%!) than first equipment carbon fiber compatible expanders (2) e (3), it weighs only 17 grams, there are on the market many expanders which weighs more than 50 grams.

Carbon-Ti X-Plug OS 1.1/4" Steerer Expander

X-Plug OS has got a special external knurling finishing  which assure a great grip with the steerer tube surface, most of expanders are smooth with less grip (2).

X-Plug OS expander is 7075T6 aluminium CNC made and has got a nice and clever design. Silver/black anodized finishing preserve aluminium from oxidation and assure a long time lasting.

Carbon-Ti X-Plug OS 1.1/4" Steerer Expander

Carbon-Ti produce also an headset cap (X-Cap Carbon Matte OS) specific for 1.1/4" oversize standard, you can find it on our webshop. X-Plug OS expander, as all Carbon-Ti products, is fully Made in Italy.

carbon-ti made in italy

Product Details

Data sheet

Weight :
17 gr.
Construction :
Ricavato dal pieno CNC
Steer tube clamp diameter :
1.1/4" Oversize
Material :
Al 7075 T6 CNC
Finish :
Alluminio anodizzato nero/silver
Steering Tube fitting :
con diametro interno compreso tra 24.0 e 28.0 mm
Bolt type :
M6
Max tightening torque :
10 Nm

Quick Compare

Product
 Carbon-Ti X-Plug OS 1.1/4" Steerer Expander Carbon-Ti X-Plug OS 1.1/4" Steerer Expander Carbon-Ti X-Plug Steerer Expander Carbon-Ti X-Plug Steerer Expander Extralite Ultrastar 4 Expander - 1.1/4" - 5.7 gr. Extralite Ultrastar 4 Expander - 1.1/4" - 5.7 gr.
Availability
This product is no longer in stock
Available
Available
Price
€18.77
€16.31
€23.77
Description

Carbon-Ti X-Plug OS ultralight steerer expander for 1.1/4" oversize steerer tubes. Fully CNC aluminium made, only 17 grams, allows to save a lot of weight. Very easy to install and remove, you just need an 8 mm allen hex key,  compatible with steerer tubes with inner diameter from 24.0 to 28.0 mm, carbon fiber or aluminium ones both. 100% Made in Italy.

Carbon-Ti X-Plug steerer expander is a practical and lightweight removable accessory which allows the locking of the headset cap adjusting bolt. The special design allows an extremely wide compatibility with most 1.1/8" carbon or aluminum alloy steerers on the market, they only should have inner diameter between 21.2 and 25.0 mm. It's 7075T6 Aluminum fully CNC made and with only 14 grams allows to save a lot of weight from stock headset expander systems. It's compatible with headset caps with M6 bolts and could be installed with an 8 mm hex wrench key. 100% Made in Italy.
The Ultrastar 4 expander is a practical and lightweight removable accessory which allows the locking of the cap adjusting bolt. The special design allows an extremely wide compatibility with most 1.1/4" oversize carbon or aluminum alloy steerers tubes on the market, they only should have inner diameter between 25.0 and 27.2 mm. It's 7075T6 Aluminum fully CNC made and with only 5.7 grams allows to save a lot of weight from stock headset expander systems. It's compatible with headset caps with M6 bolts. Ultrastar 4 is 100% Made in Italy.
Weight :
 17 gr. 14 gr. 5.7 gr.
Construction :
 Ricavato dal pieno CNC
Steer tube clamp diameter :
 1.1/4" Oversize
Material :
 Al 7075 T6 CNC Totally CNC from AL 7075 Txx Totally CNC from AL 7075 Txx
Adjustment range :
 25.0 - 27.2 mm
Finish :
 Alluminio anodizzato nero/silver Anodized, black and orange
Steering Tube fitting :
 con diametro interno compreso tra 24.0 e 28.0 mm with internal diameter from 21.2 mm to 25.0 mm 1.1/4"
Top Cap Fitting :
 With M6 register bolt With M6 register bolt
Bolt type :
 M6
Max tightening torque :
 10 Nm

There are no products selected for comparison

In the same category

Extralite Ultrastar 4 Expander - 1.1/4" - 5.7 gr. Extralite Ultrastar 4 Expander - 1.1/4" - 5.7 gr. Extralite Ultrastar 4 Expander - 1.1/4" - 5.7 gr.
Carbon-Ti

Extralite Ultrastar 4 Expander - 1.1/4" - 5.7 gr.

€23.77
The Ultrastar 4 expander is a practical and lightweight removable accessory which allows the locking of the cap adjusting bolt. The special design allows an extremely wide compatibility with most 1.1/4" oversize carbon or aluminum alloy steerers tubes on the market, they only should have inner diameter between 25.0 and 27.2 mm. It's 7075T6 Aluminum fully CNC made and with only 5.7 grams allows to save a lot of weight from stock headset expander systems. It's compatible with headset caps with M6 bolts. Ultrastar 4 is 100% Made in Italy.
    Carbon-Ti X-Plug Steerer Expander Carbon-Ti X-Plug Steerer Expander Carbon-Ti X-Plug Steerer Expander
    Carbon-Ti

    Carbon-Ti X-Plug Steerer Expander

    €16.31

    Carbon-Ti X-Plug steerer expander is a practical and lightweight removable accessory which allows the locking of the headset cap adjusting bolt. The special design allows an extremely wide compatibility with most 1.1/8" carbon or aluminum alloy steerers on the market, they only should have inner diameter between 21.2 and 25.0 mm. It's 7075T6 Aluminum fully CNC made and with only 14 grams allows to save a lot of weight from stock headset expander systems. It's compatible with headset caps with M6 bolts and could be installed with an 8 mm hex wrench key. 100% Made in Italy.

      Viewed products

      Extralite UltraTop 44 Extralite UltraTop 44 Extralite UltraTop 44
      Carbon-Ti

      Extralite UltraTop 44

      €81.15

      Extralite UltraTop 44 semi-integrated (Press-Fit internal cup) upper headset for 1.1/8"-1.1/2" standard or tapered forks. With high quality angular contact bidirectional stainless steel micro bearing. Only 14.7 gr weight. Compatibie with 44 mm inner diameter upper head tube bore frames. Made in Italy.

        Extralite HyperLefty 3 MTB Lefty Front Hub 76 gr. Extralite HyperLefty 3 MTB Lefty Front Hub 76 gr. Extralite HyperLefty 3 MTB Lefty Front Hub 76 gr.
        Carbon-Ti

        Extralite HyperLefty 3 MTB Lefty Front Hub 76 gr.

        €163.11

        Weighing just 76 grams, the Extralite HyperLefty 3 hub is the lightest Lefty hub in the world!. It's a straight pull hub with flanges for 24 or 28 spokes and is made entirely of 7075Txx aluminum with refined CNC machining, equipped with a self-extracting tightening bolt. Comes with ABI 440c stainless steel bearings with 2RS protection but as an option is possible to have HDC ceramic hybrid bearings. Disc brake rotor attach is 6 holes International Standard. The hub is compatible with Cannondale Lefty 2.0 forks (Lefty 2.0, Lefty Ocho, Lefty SuperMax). Black anodized finish with laser graphics. The HyperLefty 3 is 100% Made in Italy.

          Extralite OctaRamp MC 36-52T Extralite OctaRamp MC 36-52T Extralite OctaRamp MC 36-52T
          Carbon-Ti

          Extralite OctaRamp MC 36-52T

          €122.13

          Extralite OctaRamp MC, road compact chainrings set, Al 7075T6 CNC made. 52T-36T BCD 110 mm 5 holes, fits Shimano, Sram, Campagnolo 10-11 speed systems (not compatible with 12 speed). Only 99 gr. for the pair! Also single chainrings are purchasable.

           

            Carbon-Ti X-Cap Titanium Carbon-Ti X-Cap Titanium Carbon-Ti X-Cap Titanium
            Carbon-Ti

            Carbon-Ti X-Cap Titanium

            €16.31

            Superlight headset Titanium Gr.5 cap, cnc machined supplied with a Torx 30mm Al7075-T6 anodized coloured bolt. Weights only 8.4 grams (bolt included). 100% Made in Italy.

              Darimo Carbon 9° Ultralight Flatbar From 79 gr. Darimo Carbon 9° Ultralight Flatbar From 79 gr. Darimo Carbon 9° Ultralight Flatbar From 79 gr.
              Carbon-Ti

              Darimo Carbon 9° Ultralight Flatbar From 79 gr.

              €154.92

              Darimo Carbon 9° Flatbar, with weights from only 79 gr. is the lightest MTB handlebar in the world!. It's made of high module monocoque carbon fiber, super optimized in design and lamination. FEM analysis and lab testing makes it not only ultralight but also safe and reliable (ISO 4210 safety tested). Available in 31.8 mm oversize diameter and widths up to 800 mm, carbon fiber 3k twill natural finishing or unidirectional UD (matte or gloss) with many decal color options. MTB XC use compatible with 90 kg max rider weight (also without limitations on demand). 100% Made in Spain.

                GrigioCarbonio Attack T800 Ultralight Carbon Stem GrigioCarbonio Attack T800 Ultralight Carbon Stem GrigioCarbonio Attack T800 Ultralight Carbon Stem
                Carbon-Ti

                GrigioCarbonio Attack T800 Ultralight Carbon Stem

                €343.44

                GrigioCarbonio Attack T800 ultralight stem, +/-6° or +/-17° angle, for 31.8 mm handlebars and 1.1/8" standard headtube. With only 65 gr. weight (70 mm), is one of the lightest stem in the world but it's super strong, stiff and safe at the same time. Monocoque high module carbon fiber made with special gr.5 titanium bolts. Road, MTB (XC, Enduro), CX and Gravel use. 70-80-90-100-110-120 mm length, 3k or UD, glossy or matte finishing, decal stickers and hardware available in many colors. 100% Made in Italy.

                  You might also like

                  Extralite HyperStem 1.25 Stealth Extralite HyperStem 1.25 Stealth Extralite HyperStem 1.25 Stealth
                  Carbon-Ti

                  Extralite HyperStem 1.25 Stealth

                  €163.11

                  Extralite HyperStem 1.25 Stealth with only 69 gr. (80 mm) weight, is the lightest aluminum stem in the world compatible with 1.1/4" Oversize head tubes, but it's strong, stiff and safe at the same time. Fully 7075 Txx CNC machined with special gr.5 titanium bolts black PVD coated. Road, MTB (XC, Enduro) and Gravel use. Oversize 31.8 mm handlebar standard. 80-90-100-110-120 mm length, black anodized color with black laser etches (Stealth look).  CH-01 Computer Holder as option. 100% Made in Italy.

                    Carbon-Ti X-Cap Carbon Matte OS 1.1/4" Headset Cap Carbon-Ti X-Cap Carbon Matte OS 1.1/4" Headset Cap Carbon-Ti X-Cap Carbon Matte OS 1.1/4" Headset Cap
                    Carbon-Ti

                    Carbon-Ti X-Cap Carbon Matte OS 1.1/4" Headset Cap

                    €16.31

                    Carbon-Ti X-Cap Matte OS ultralight special headset cap for 1.1/4" oversize stems. Carbon fiber made with 3k matte natural carbon finishing, only 6 grams, allows to save a lot of weight and  adds a touch of racing look. Comes with a 7075T6 CNC alumnium bolt (M6 x 35 mm T25 Torx head) available in several anodized colors. 100% Made in Italy.