Carbon-Ti X-Plug OS 1.1/4" Steerer Expander

€18.77

Carbon-Ti X-Plug OS ultralight steerer expander for 1.1/4" oversize steerer tubes. Fully CNC aluminium made, only 17 grams, allows to save a lot of weight. Very easy to install and remove, you just need an 8 mm allen hex key,  compatible with steerer tubes with inner diameter from 24.0 to 28.0 mm, carbon fiber or aluminium ones both. 100% Made in Italy.

• Out-of-Stock

Carbon-Ti X-Plug Steerer Expander

€16.31

Carbon-Ti X-Plug steerer expander is a practical and lightweight removable accessory which allows the locking of the headset cap adjusting bolt. The special design allows an extremely wide compatibility with most 1.1/8" carbon or aluminum alloy steerers on the market, they only should have inner diameter between 21.2 and 25.0 mm. It's 7075T6 Aluminum fully CNC made and with only 14 grams allows to save a lot of weight from stock headset expander systems. It's compatible with headset caps with M6 bolts and could be installed with an 8 mm hex wrench key. 100% Made in Italy.

Carbon-Ti X-Ring Evo BCD 104 mm Ultralight Aluminium Mono-Ring

€51.56

Carbon-Ti X-Ring EVO ultralight mono-ring with synchronized teeth, Aluminium CNC made, compatible with 11-12 speed drivetrain (Sram and Shimano both). The "narrow wide" synchronized teeth allows it to work even without the chain guide. The maximum reliability is guaranteed only with rear derailleurs with clutch as SRAM XX1 AXS, XX1 Eagle, XX1, X01 Eagle, X01, X1, GX, X0, X9 Type 2 or Shimano Shadow Plus. 7075T6 Aluminium assure a longer lasting than standard aluminum chainrings. Available in 30T (27 gr.) - 32T (34 gr.) - 34T (42 gr.) - 36T (47 gr.) - 38T (57 gr.), compatible with cranks with 4 holes 104 mm BCD spider ( Powermeter SRM and Quarq Sram XX1 Eagle included). 100% Made in Italy.

Carbon-Ti X-RoadCam BCD 110 mm (5 Arms) Asymmetrical Chainring

€55.66

Carbon-Ti X-RoadCam BCD 110 mm 5 arms, asymmetric chainrings CNC Aluminum made, for Road Racing, Gravel and Cross use. The special variable twin cam geometry allows a quicker overcoming of the dead spots and provides a more efficient and powerful pedal stroke. The special 7075T6 alloy ensures a significantly longer life than a normal aluminum chainring. Compatible with 5-arm and 110 mm bolt ring cranks such as THM Clavicula SE or Quarq Dzero. Compatible up to 11s groupsets included. Not compatible with 12s groupsets. Black anodized finish with laser etched graphics. Available in : 36T (30 gr.); 38T (36 gr.); 50T (113 gr.); 52T (116 gr.). 100% Made in Italy.

Carbon-Ti X-Rotor Aero Center Lock Aerodynamic Disc Brake Rotor

€195.90

Carbon-Ti X-Rotor Aero Center Lock, superlight semi-floating Aerodynamic disc brake rotor developed with UAE Team Emirates. Steel braking surface (replaceable and regenerable), carbon fiber inner body and laser etched titanium fixing rivets and protection plate, 7075T6 CNC aluminum Center Lock adapter. The braking surface has a special design that reduces wear of the pads ensuring optimum braking power and heat dissipation. UCI approved. Can be used with any kind of pads (organic recommended). Available in 140-160 mm diameter with Center Lock fixing (also compatible with 6 holes I.S. without the use of the Center Lock adapter). Used by Pogacar and UAE Emirates Team at Giro d'Italia, Tour de France and World Tour. Weights from 93 gr. 100% Made in Italy.

Carbon-Ti X-Rotor SteelCarbon 3 Brake Rotor

€136.80

Carbon-Ti X-Rotor SteelCarbon 3, superlight semi-floating disc rotor with steel braking surface (replaceable and regenerable), carbon fiber inner body and laser etched titanium fixing rivets. The braking surface has a special design that reduces wear of the pads ensuring optimum braking power and heat dissipation. Profile with rounded CNC-machined edges that increase safety and comply with the UCI regulations. Can be used with any kind of pads (organic recommended). Available in 140-160-180 mm diameter with 6 holes I.S fixing (Center Lock with the use of special adapters as an option). Weights from 68 gr. 100% Made in Italy.

Carbon-Ti X-Rotor SteelCarbon 3 Center Lock Disc Brake Rotor

€162.30

Carbon-Ti X-Rotor SteelCarbon 3 Center Lock, superlight semi-floating disc rotor with steel braking surface (replaceable and regenerable), carbon fiber inner body and laser etched titanium fixing rivets and protection plate, 7075T6 CNC aluminum Center Lock adapter. The braking surface has a special design that reduces wear of the pads ensuring optimum braking power and heat dissipation. Profile with rounded CNC-machined edges that increase safety and comply with the UCI regulations. Can be used with any kind of pads (organic recommended). Available in 140-160-180 mm diameter with Center Lock fixing (also compatible with 6 holes I.S. without the use of the Center Lock adapter). Used by Pogacar and UAE Team at Giro d'Italia and Tour de France. Weights from 86 gr. 100% Made in Italy.

Carbon-Ti X-Rotor Titanium Bolt Kit

€16.31

Titanium rotor fixing bolt kit, superlight, low profile forged head, Torx T25 Socket, rolled threads. 6 pieces (for one wheel). 100% Made in Italy.

Carbon-Ti X-SingleCarbon BCD 107 mm (4 Arms) Ultralight Aluminium/Carbon Mono-Ring

€137.62

Carbon-Ti X-SingleCarbon, super-light synchronized mono-chainring CNC Aluminum and Carbon Fiber made, for Road Racing, Gravel and Cross use. The synchronized profile of the "narrow-wide" teeth guarantees perfect retention of the chain and allows use without a chain guide. The special 7075T6 alloy ensures a significantly longer life than a normal aluminum chainring, the carbon fiber part of the structure allows to increase stiffness while containing weight. Compatible with Sram Force and Rival AXS 12s cranks and Powermeteres equipped with BCD 107 mm 4 arms spider or attachment. Black anodized finish (aluminum) and 3k glossy finish (carbon fiber). Available in : 38T (56 gr.); 40T (71 gr.); 42T (72 gr.); 44T (82 gr.); 46T (90 gr.). 100% Made in Italy. 

Carbon-Ti X-SyncroCam Ti BCD 76 mm Asymmetric Titanium Black Monoring

€81.15

Carbon-Ti X-SyncroCam Ti, ultralight asymmetrical monoring with synchronized teeth, CNC made, compatible with 9-10-11-12 speed drivetrain. The special variable geometry allows a quicker overcoming of the dead spots and provides a more efficient and powerful pedal stroke. The "narrow wide" synchronized teeth allows it to work even without the chain guide. The maximum reliability is guaranteed only with rear derailleurs with clutch as SRAM XX1, X01, X1, GX, X0, X9 Type 2 or Shimano Shadow Plus. Grade 5 Titanium assure a three time longer lasting than aluminum chainrings. Available in 76 BCD  30T (45 gr.) - 32T (49 gr.) - 34T (54 gr.). 100% Made in Italy.

Carbon-Ti X-SyncroCam Ti BCD 76 mm Asymmetric Titanium Monoring

€81.15

Carbon-Ti X-SyncroCam Ti, ultralight asymmetrical monoring with synchronized teeth, CNC made, compatible with 9-10-11-12 speed drivetrain. The special variable geometry allows a quicker overcoming of the dead spots and provides a more efficient and powerful pedal stroke. The "narrow wide" synchronized teeth allows it to work even without the chain guide. The maximum reliability is guaranteed only with rear derailleurs with clutch as SRAM XX1, X01, X1, GX, X0, X9 Type 2 or Shimano Shadow Plus. Grade 5 Titanium assure a three time longer lasting than aluminum chainrings. Available in 76 BCD  30T - 34T. Weight : 45 gr. (30T) - 54 gr. (34T). Natural titanium satin finish or black. 100% Made in Italy.

Ceramic Bearing Kit (4x) for Extralite UltraPulley Jockey Wheels

€36.07

Extralite Ceramic Bearing kit (4x) for Extralite UltraPulley Jockey Wheels series (11-11 / 12-12 / 12-12 PH / 13-13 / 12-14 PH). HYC Hyper Ceramic bearings double 2RS sealed super smooth, fast, quiet and durable. Only 1.5 gr. weight each (6 gr. for the kit). Not compatible with other Jockey Wheels, we remember that Extralite UltraPulleys are the unique with double bearing for each Jockey Wheel.

Cruel Components VoR BCD 104 mm Ultralight Aluminium Mono-Ring

€49.10

Cruel Components VoR ultralight mono-ring chainring with synchronized teeth, Aluminium CNC made, compatible with 10-11-12 speed drivetrain (Sram and Shimano both). The "narrow wide" synchronized teeth allows it to work even without the chain guide. The maximum reliability is guaranteed only with rear derailleurs with clutch as SRAM XX1 AXS, XX1 Eagle, XX1, X01 Eagle, X01, X1, GX, X0, X9 Type 2 or Shimano Shadow Plus. 7075T6 Aluminium assure a longer lasting than standard aluminum chainrings. Available in 30T - 32T - 34T - 36T , black, gold or red anodized finish with milled graphics. Compatible with cranks with 4 holes 104 mm BCD spider ( Powermeter SRM and Quarq Sram XX1 Eagle included). Integrated female threaded chainring fixing bolts. 44 gr. weight (34T). 100% Made in Italy.

Darimo Carbon Sub4 Seatpost Seat Clamp

€56.56

Darimo Carbon Sub4 ultralight seatpost seat clamp with carbon fiber monocoque body and titanium grade 5 bolt. With less than 4 grams is the lightest seatpost seat clamp in the world. Available in several diameters with UD matte finishing and black hardware. Made in Spain.

Extralite Aliens 3

€97.54

Extralite Aliens 3 ultralight quick release wheel skewers with Gr.5 titanium axles and Al7075T6 levers. Superbe machining and shaping. Extremely reliable although their only 55 gr. weight for the pair. Available in 6 beautiful anodized colors. Compatible with standard QR9 100 mm and QR10 130-135 mm Road or MTB hubs both.

Extralite bar clamps kit for Ultrastem

€20.41

Extralite bar clamps kit for Ultrastem/Roadstem, include 2 Al 7075 Txx full CNC made bar clamps (25.4 mm diameter). Weights only 6.0 - 6.5 gr for the pair. The kit is compatible with all kind of Ultrastem and Roadstem (MTB and road both) and if installed on <2011 Ultrastems will save about 2 grams. Not compatible with oversize 31.8 mm stem like Ultrastem OC, Roadstem OC and Hyperstem.

Extralite BlackLock QR12 Rear Wheel Thru Axle 12 mm

€64.75

Extralite BlackLock QR12 ultralight 12 mm rear thru axle for frames with Shimano E-Thru, Specialized X-12; Rock Shox Maxle and Scott standard 142 mm or 148 mm Boost both. Fully CNC Al 7075T6 made, black anodized with laser etched graphics. Bronze washer for smooth action. Weights from 29 gr, allows to save up to 50 gr.  Locks with 6 mm hex wrench.

Extralite BlackLock QR15 Front Wheel Thru Axle 15 mm

€64.75

Extralite BlackLock QR15 ultralight 15 mm thru axle for DT Swiss, Fox, (also Boost) Rock Shox (also Boost) or Magura forks. Fully CNC Al 7075T6 made, black anodized with laser etched graphics. Bronze washer for smooth action. Weights from 25 gr, allows to save up to 50 gr.  Locks with 6 mm hex wrench (BlackLock 15.1 with 8 mm hex wrench).

Extralite ExtraBolt 1 Ultralight Chainring Bolts Kit (4 Males + 4 Females)

€19.67

Extralite ExtraBolt 1 ultralight chainring bolts kit which contains 4 males (M8x0.75) with standard thickness (7 mm) and 4 females (M10x0.75) with standard thickness (6 mm). 7075T6 Aluminium CNC made with T30 Torx (males) and 6 mm allen (females) key insert, only 7.2 grams weight (complete set). Available in several anodized colors with "Extra Bolt" laser engraved logo. It's a specific kit for double or triple drivetrains (works also for some single drivetrains where there is a thick spider or a power meter), Road Racing or MTB both and works on 4 holes chainrings (also with 5 holes chainrings if the cranks comes equipped with a proprietary chainring bolt, like Extralite QRC-3 cranks). Extralite ExtraBolt 1 are 100% Made in Italy.

Extralite ExtraBolt 18 Ultralight Center Lock Disc Brake Rotor Locking Ring 5.45 gr.

€23.77

Extralite ExtraBolt 18 ultralight Center Lock disc brake rotor locking ring. Made of 7075T6 CNC aluminium, thanks to the super refined design weighs only 5.45 grams and it's one of the lightest on the market and allows a weight saving of over 30% compared to the original Shimano one. Compatible with all Center Lock hubs and disc brake rotors. Comes in black or silver anodized finishing with the laser engraved "Extralite" logo. Can be tightened with a Shimano TL-UN70 type wrench or with a compass tightening wrench with 3 mm diameter pins (maximum tightening torque 30 Nm, thread length 5.3 mm). The package include a single ring nut, so for a complete bicycle you will need to purchase two. 100% Made in Italy.

• New

Extralite ExtraBolt 3.3 Cassette Lockring

€15.57

Extralite ExtraBolt 3.3 cassette lockring. 100% CNC made, aluminum 7075 T6, available in several anodized colours with laser etched graphics. Only 3.4 gr. weight, compatible 11T and 12T first gear both and Shimano 9-10-11 s and Sram 9-10 s.

Extralite ExtraBolt 4.5 Brake Caliper Bolts

€23.77

Extralite ExtraBolt 4.5 : titanium bolts set for Post-Mount brake calipers. Each kit contain 4 pcs T30 torx grade 5 titanium bolts. Complete kit weight is only 9.2 gr.

Extralite ExtraBolt 4.5 Brake Caliper Titanium Bolts Black

€28.69

Extralite ExtraBolt 4.5 : titanium bolts set for Post-Mount brake calipers. Each kit contain 4 pcs T30 torx grade 5 titanium bolts with forged head, rolled threads and integrated washers. Complete kit weight is only 9 gr. Black PVD finishing.

Extralite ExtraBolt 9.1 Brake Rotor Titanium Bolts Kit Black

€28.69

Extralite ExtraBolt 9.1 : titanium bolts set for International Standard brake rotors. Each kit contain 6 pcs T20 torx grade 5 titanium bolts with forged head and rolled threads. Complete kit weight is only 5 gr. Black PVD finishing.

Extralite Hyper BB BSA MTB/Road Racing Bottom Bracket From 65 gr.

€59.02

Extralite Hyper BB BSA 68-73 mm MTB/Road racing bottom bracket compatible with 29 mm (DUB) or 30 mm axle diameter cranks. This axle diameter in combination with the external bearings increase the stiffness of the cranks and extend the service life of the bearings. BB cups are made of aluminum CNC machined with BSA threads (compatible with 68 mm or 73 mm BSA threaded frames) and then black anodized, bearings are high quality ones and are available with some options (ABI-Enduro Standard, ABI-Enduro Stainless, HyC HyperCeramic, XD-15 Ceramic). Only 65 gr. weight (with HyC Hyper Ceramic bearings). Installation (from inside BB shell) require cartridge type BB tools (Octalink, ISIS, etc.).

Extralite HyperCap Headset Cap

€23.77

Extralite HyperCap, headset cap for 1.1/8" standard stems. Fully alu 7075 T6 CNC machined, available in ten beautiful anodized colours with "pin-up" logo laser etching. Only 2.9 grams (ergal preload special bolt included).

Extralite HyperHubs Enduro ABEC5 Bearings Kit Front+Rear

€59.02

ABI Enduro ABEC5 high quality bearings complete kit for Extralite Hyper series hubs (HyperBoost F, HyperBoost R, HyperFront, HyperLefty, Hyper JF, Hyper JL, HyperRear1&2, HyperCamber1&2 e Hyper JR),  Include 6 bearings (2 front + 4 rear). Weghts from 63 gr.

Extralite HyperHubs Enduro ABEC5 Stainless Bearings Kit Front+Rear

€88.52

ABI Enduro ABEC5 high quality stainless steel bearings complete kit for Extralite Hyper series hubs (HyperBoost F, HyperBoost R, HyperFront, Hyper JF, HyperRear1&2, HyperCamber1&2 e Hyper JR),  Include 6 (2 front + 4 rear) stainless steel bearings that will last longer due to their better corrosion resistance. Weghts from 66 gr.

Extralite HyperStem Special Black Ti Torx Bolt (kit of 6)

€40.16

Extralite titanium special bolts set for HyperStem. Each kit contain 6 pcs T20 torx M4 x 12 mm grade 5 titanium bolts with forged head and rolled threads. Complete kit weight is only 4,65 gr. Black PVD finishing.

Extralite LeftyLite Ultralight Head Tube For Lefty Forks

€146.72

Extralite LeftyLite Ultralight Lefty Head Tube, allows to install 1.1/8" standard stems on Lefty forks so also lightweight stems with any angle / length. Compatible  with Lefty 1.0 - Lefty 2.0 - Lefty SuperMax  forks. Comes in a single lenght (shortable), compatible with any frame/fork size. Made of high module Carbon Fiber with Aluminium anodized inserts. Only 98 grams weight in 202 mm lenght. Combined with a stem like HyperStem, allows to save up to 150 grams.

Extralite OctaOne 104 mm BCD Monoring

€48.36

Extralite OctaOne, ultralight aluminium CNC made monoring for 9-10-11-12 speed drivetrains (Sram T-Type 12s excluded) compatible with 104 bcd 4 holes standard. Available in 30T - 32T - 34T - 36T  with weights from 28.5 gr. 100% Made in Italy.

Extralite OctaRamp MC 36-52T

€122.13

Extralite OctaRamp MC, road compact chainrings set, Al 7075T6 CNC made. 52T-36T BCD 110 mm 5 holes, fits Shimano, Sram, Campagnolo 10-11 speed systems (not compatible with 12 speed). Only 99 gr. for the pair! Also single chainrings are purchasable.

 

Extralite OctaRamp RC2 34-50T

€122.13

Extralite OctaRamp RC2, road compact chainrings set, Al 7075T6 CNC made. 50T-34T BCD 110 mm 5 holes, fits Shimano, Sram and Campagnolo 10-11 speed  systems (not compatible with 12s). Only 94 gr. for the pair! Also single chainrings are purchasable.

 

Extralite Streeters Ultralight Road Quick Release Wheel Skewers 29 gr.

€97.54

Extralite Streeters ultralight quick release wheel skewers with Gr.5 titanium axles and Al7075T6 levers. Superbe machining and shaping. Extremely reliable although lightweight. With only 29 gr. for the pair, Streeters are some of the lightest on the market. Available in 6 beautiful anodized colors. Only for Road use, compatible with standard quick release hubs 100/130 mm spacing. 100% Made in Italy.

Extralite UltraClamp Ultralight Seatpost Clamp

€16.31

Extralite UltraClamp ultralight seatpost clamp with Al7075-T6 CNC machined body and Titanium Grade bolt. Weights 11.5 grams. Available in 31.8 mm and 34.9 mm diameter and several anodized colours. 100% Made in Italy.

Extralite UltraPulley 11-11 Ultralight 11 Teeth Ceramic Jockey Wheels, Sram, Shimano, Campagnolo

€122.13

Extralite UltraPulley 11-11, ultralight rear derailleur 11T jockey wheels. Fullly Delrin CNC made, double 2RS sealed ceramic bearings. Only 10.2 gr. weight for the pair, Great smoothness, quietness and shifting precision. Compatibile with Sram Red/X.0, Shimano MTB, Shimano Road 10-11 speed and Campagnolo 10-11-12 speed rear derailleurs. 100% Made in Italy.