Carbon-Ti X-MonoSync Ti round chainrings are made of titanium and must be used as monorings with single chainring 10-11-12s drivetrains. They're fully compatible with stock chainrings with the same offset and of course chainline.
X-MonoSync Ti chainrings are fully CNC machined from a sheet of high quality grade 5 titanium. This material, very hard, allows a three time longer lasting than any other aluminium chainring on the market and this is a great advantage especially with monoring systems where chainring premature wearing is the biggest problem.
X-MonoSync Ti chainrings has got special teeth synchronized with the internal footprint of the chain allows it to work even without the chain guide. The maximum reliability is guaranted only with clutch equipped rear derailleurs like Sram Eagle-XX1-X01_X1-GX-NX-X0-X9 type2 or Shimano Shadow Plus.
Every little detail is optimized on X-MonoSync Ti chainrings, CNC machining allows super precise tolerances and smooth shapes. Chainrings are finished in black anodized with laser engraved graphics and logos.
X-MonoSync Ti chainrings are made with these standards :
With weights from 33 grams, X-MonoSync Ti chainrings are very light although to the material that they are made of. Titanium is very hard and durable and they've got the best wearing time/weight ratio possible!
They comes with an elegant cardboard box and with user manual (italian and english language both). X-MonoSync Ti chainrings, like all other Carbon-Ti products, are 100% Made in Italy.
Prodotto |
|
|
|
|
Availability |
Questo prodotto non è più disponibile
|
Questo prodotto non è più disponibile
|
Questo prodotto non è più disponibile
|
Questo prodotto non è più disponibile
|
Prezzo |
104,84 €
|
106,56 €
-10%
95,90 €
|
89,34 €
|
89,34 €
|
Descrizione |
Carbon-Ti X-MonoSync Ti, monocorona sincronizzata superleggera in titanio CNC per sistemi monoring 10-11-12 velocità. Il profilo sincronizzato dei denti "narrow-wide" garantisce una perfetta ritenzione della catena e consente l'utilizzo senza guidacatena. La speciale lega di titanio grado 5 assicura una durata tre volte superiore rispetto ad una corona in alluminio. Per pedivelle con attacco o spider 4 fori BCD 104 mm come Powermeter SRM e Quarq. Finitura nera anodizzata, grafiche laser. Dentature 30T - 32T - 34T - 36T. Pesi : 33 gr. (30T) ; 35 gr. (32T) ; 42 gr. (34T) ; 51 gr. (36T). 100% Made in Italy. |
Carbon-Ti X-MonoSync, monocorona sincronizzata superleggera in titanio CNC per sistemi monoring 9-10-11-12 velocità (Sram Eagle compreso). Disponibile con attacco 4 fori girobulloni standard 104 bcd o 76 bcd per Sram XX1, oppure integrata con attacco diretto su pedivelle Sram/Truvativ, Specialized S-Works, Hollowgram. Dentature 28T - 30T - 32T - 34T - 36T . Pesi a partire da 33 gr. |
Ingrid corona MTB Direct Mount compatibile esclusivamente con pedivelle Ingrid. Si tratta di una corona realizzata in lega di alluminio 7075T6 (ergal) ricavata dal pieno con lavorazione sofisticata CNC. La qualità dei materiali, i trattamenti termici subiti e la precisione delle lavorazioni garantiscono un ottima precisione, fluidità di funzionamento, capacità di ritenzione della catena e grande durata nel tempo. Linea catena di 49.5 mm (se utilizzata con assale da 131 mm) e di 52 mm (se utilizzata con assale da 136 mm). Disponibile con finitura nera anodizzata nelle dentature 32T - 34T - 36T. Pesi compresi tra 76 ed 86 grammi. Compatibile sui sistemi monocorona con catene 11v-12v e 13v (Campagnolo Ekar). 100% Made in Italy. |
Ingrid corona Gravel Direct Mount compatibile esclusivamente con pedivelle Ingrid. Si tratta di una corona realizzata in lega di alluminio 7075T6 (ergal) ricavata dal pieno con lavorazione sofisticata CNC. La qualità dei materiali, i trattamenti termici subiti e la precisione delle lavorazioni garantiscono un ottima precisione, fluidità di funzionamento, capacità di ritenzione della catena e grande durata nel tempo. Linea catena di 49.5 mm (se utilizzata con assale da 131 mm) e di 52 mm (se utilizzata con assale da 136 mm). Disponibile con finitura nera anodizzata nelle dentature 36T - 38T - 40T - 42T. Pesi compresi tra 86 e 101 grammi. Compatibile sui sistemi monocorona con catene 11v-12v e 13v (Campagnolo Ekar). 100% Made in Italy. |
Peso : |
33 gr. (30T) - 35 gr. (32T) - 42 gr. (34T) - 51 gr. (36T) | A partire da 33 gr. (vedi tabella in "dettagli") | 76 gr. (32T) - 81 gr. (34T) - 86 gr. (36T) | 86 gr. (36T) - 91 gr. (38T) - 96 gr. (40T) - 101 gr. (42T) |
Costruzione : |
Fresatura CNC | Ricavata dal pieno tramite lavorazione CNC | Ricavata dal pieno tramite lavorazione CNC | |
Linea Catena : |
49.5 mm (con assale da 131 mm) - 52 mm (con assale da 136 mm) | 49.5 mm (con assale da 131 mm) - 52 mm (con assale da 136 mm) | ||
Materiale : |
Titanio grado 5 speciale | Titanio grado 5 speciale | Alluminio 7075 T6 | Alluminio 7075 T6 |
Finitura : |
Nera | Titanio naturale satinato | Nero anodizzato | Nero anodizzato |
Grafiche : |
Laser | Laser | ||
Utilizzo : |
MTB | XC, All Mountain, Enduro | MTB/Gravel | Gravel/MTB/Strada/Ciclocross |
Numero di denti : |
30T-32T-34T-36T | 28T - 30T - 32T - 34T - 36T | 32T-34T-36T | 36T-38T-40T-42T |
Tipo di denti : |
Sincronizzati | Sincronizzati | ||
BCD (girobulloni) : |
104 mm, 4 fori | |||
Compatibilità : |
Con pedivelle dotate di spider con attacco a 4 fori 104 mm BCD (Powermeter SRM, Quarq etc.) e trasmissioni 10-11-12v | BCD 76 4 fori, BCD 104 4 fori, Integral Hollowgram, Integral Truvativ/Sram, Integral S-Works - sistemi 9-10-11-12 v | Solo con pedivelle Ingrid e catene 11v-12v e 13v (Ekar) nei sistemi monocorona | Solo con pedivelle Ingrid e catene 11v-12v e 13v (Ekar) nei sistemi monocorona |
Non ci sono prodotti selezionati da comparare
Absolute Black ultralight 7075Txxx aluminium CNC chainring narrow-wide type for monoring 9-10-11-12 speed drivetrains. Available in this standards : Cannondale Direct Mount - Sram Boost 148 Direct Mount - Sram BB30 Direct Mount - Sram BB30 Oval Direct Mount - BCD 64 4 holes - BCD 104 4 holes Oval. Black or red anodized, 28T-30T-32T. Weights from 39 grams. Designed and produced inside UE.
Carbon-Ti X-SyncroCam Ti, ultralight asymmetrical monoring with synchronized teeth, CNC made, compatible with 9-10-11-12 speed drivetrain. The special variable geometry allows a quicker overcoming of the dead spots and provides a more efficient and powerful pedal stroke. The "narrow wide" synchronized teeth allows it to work even without the chain guide. The maximum reliability is guaranteed only with rear derailleurs with clutch as SRAM XX1, X01, X1, GX, X0, X9 Type 2 or Shimano Shadow Plus. Grade 5 Titanium assure a three time longer lasting than aluminum chainrings. Available in 76 BCD 30T (45 gr.) - 32T (49 gr.) - 34T (54 gr.). 100% Made in Italy.
Gemini Rigel, super-light MTB Direct Mount 3 mm offset forged carbon chainring with 7075T6 aluminum teeth core. The special construction guarantees the same durability as an aluminum chainring but with less weight and friction and greater stiffness and smoothness, Narrow-Wide teeth for perfect chain retention. Produced with different attachment standards (Sram 3 bolts, sram 8 bolts, Shimano, Race Face/Easton, Cannondale Hollowgram). Compatible with all types of Sram and Shimano 11-12s chains. Forged carbon natural finish with molded graphics. Available in 30T-32T-34T-36T-38T with 3 mm offset. Weights starting from only 39 grams (Sram 3 holes 30T). Revolutionary design and technology, High quality superfine product. 100% Handcrafted in Barcelona, Spain.
Ingrid Gravel Direct Mount chainring compatible only with Ingrid cranks. It's made of 7075T6 aluminum alloy machined from solid with sophisticated CNC machining. The quality of the materials, the heat treatments undergone and the precision of the workmanship guarantee excellent precision, smoothness, chain retention capacity and great durability. 49.5 mm chainline (if used with 131 mm axle) or 52 mm (if used with 136 mm axle). Avaiolable with black anodized finish in 36T - 38T - 40T - 42T. weights between 86 and 101 grams. Compatible on single chainring systems with 11s-12s and 13s (Campagnolo Ekar) chains. 100% Made in Italy.
Cruel Components VoR ultralight mono-ring chainring with synchronized teeth, Aluminium CNC made, compatible with 10-11-12 speed drivetrain (Sram and Shimano both). The "narrow wide" synchronized teeth allows it to work even without the chain guide. The maximum reliability is guaranteed only with rear derailleurs with clutch as SRAM XX1 AXS, XX1 Eagle, XX1, X01 Eagle, X01, X1, GX, X0, X9 Type 2 or Shimano Shadow Plus. 7075T6 Aluminium assure a longer lasting than standard aluminum chainrings. Available in 30T - 32T - 34T - 36T , black, gold or red anodized finish with milled graphics. Compatible with cranks with 4 holes 104 mm BCD spider ( Powermeter SRM and Quarq Sram XX1 Eagle included). Integrated female threaded chainring fixing bolts. 44 gr. weight (34T). 100% Made in Italy.
Carbon-Ti X-DirectDisc 8-hole 3 mm offset ultralight Direct Mount mono-ring with synchronized teeth, Aluminium CNC made.The "narrow wide" synchronized teeth allows it to work even without the chain guide. 7075T6 Aluminium assure a longer lasting than standard aluminum chainrings. Compatible with Sram Eagle cranks with 8 bolts Direct Mount chainring fixing (XX SL, XX, XO, GX etc.) and with all 11-12s chains. 3 mm Offset (55 mm chainline on to 174 mm Q-Factor cranks and 52 mm chainline on to 168 mm Q-Factor cranks). Available in 30T (58 gr.) - 32T (63 gr.) - 34T (67 gr.) - 36T (71 gr.) - 38T (78 gr.). Black anodized with laser etched graphics. 100% Made in Italy.
Ingrid MTB Direct Mount chainring compatible only with Ingrid cranks. It's made of 7075T6 aluminum alloy machined from solid with sophisticated CNC machining. The quality of the materials, the heat treatments undergone and the precision of the workmanship guarantee excellent precision, smoothness, chain retention capacity and great durability. 49.5 mm chainline (if used with 131 mm axle) or 52 mm (if used with 136 mm axle). Avaiolable with black anodized finish in 32T - 34T - 36T. weights between 76 and 86 grams. Compatible on single chainring systems with 11s-12s and 13s (Campagnolo Ekar) chains. 100% Made in Italy.
Carbon-Ti X-Ring EVO ultralight mono-ring with synchronized teeth, Aluminium CNC made, compatible with 11-12 speed drivetrain (Sram and Shimano both). The "narrow wide" synchronized teeth allows it to work even without the chain guide. The maximum reliability is guaranteed only with rear derailleurs with clutch as SRAM XX1 AXS, XX1 Eagle, XX1, X01 Eagle, X01, X1, GX, X0, X9 Type 2 or Shimano Shadow Plus. 7075T6 Aluminium assure a longer lasting than standard aluminum chainrings. Available in 30T (27 gr.) - 32T (34 gr.) - 34T (42 gr.) - 36T (47 gr.) - 38T (57 gr.), compatible with cranks with 4 holes 104 mm BCD spider ( Powermeter SRM and Quarq Sram XX1 Eagle included). 100% Made in Italy.
