Carbon-Ti X-DirectDisc 8-hole 3 mm offset ultralight Direct Mount mono-ring with synchronized teeth, Aluminium CNC made.The "narrow wide" synchronized teeth allows it to work even without the chain guide. 7075T6 Aluminium assure a longer lasting than standard aluminum chainrings. Compatible with Sram Eagle cranks with 8 bolts Direct Mount chainring fixing (XX SL, XX, XO, GX etc.) and with all 11-12s chains. 3 mm Offset (55 mm chainline on to 174 mm Q-Factor cranks and 52 mm chainline on to 168 mm Q-Factor cranks). Available in 30T (58 gr.) - 32T (63 gr.) - 34T (67 gr.) - 36T (71 gr.) - 38T (78 gr.). Black anodized with laser etched graphics. 100% Made in Italy.
The Carbon-Ti X-DirectDisc 8-hole 3mm offset are round single chainrings made of aluminium, designed to be used in 11-12s single chainring systems. They are Direct Mount chainrings that mount directly on cranks equipped with a standard 8-bolt Sram connection (Eagle XX SL, Eagle XX, Eagle XO, Eagle GX, etc.). To fix them, use the original bolts supplied with the cranks.
The X-DirectDisc 8-hole 3 mm offset chainrings are made from a solid piece using sophisticated numerical control machining starting from a sheet of aeronautical aluminum alloy (7075T6). This very hard material guarantees a significantly longer lifespan than a normal aluminum chainring and helps to limit one of the typical problems of single-chainring systems : the premature wear of the chainring itself.
The X-DirectDisc 8-hole 3 mm offset are equipped with a special toothing synchronized with the internal impression of the chain links which allows them to function even without the chain guide. Maximum operating reliability in this sense, however, is guaranteed exclusively with rear derailleurs equipped with a clutch like all modern Sram Eagle or Shimano Shadow Plus derailleurs.
The special millings are present on both the external and internal side of the chainring and by alternating wide tooth with narrow tooth they phase correctly on the chain links allowing perfect retention of the chain. Not only the width of the tooth is important, but also its inclination and exit angle and Carbon-Ti in designing the X-DirectDisc 8-hole 3mm offset chainrings left nothing to chance.
The profile of the teeth is in fact bevelled in such a way as to facilitate use with the outermost sprockets, i.e. the first and last of the sprocket cassette which are notoriously the most critical but often also the most used. The refined and optimized design allows for very low friction of use and consequent silence with optimal functioning even in the most demanding conditions of intense mud. The "closed" structure then guarantees greater stiffness and prevents accumulations of dirt or the entry of foreign bodies.
The finish of the chainrings is black anodized, the graphics are lasered etched. The available teeth are: 30T-32T-34T-36T-38T, compatibility is ensured with all cranks equipped with Direct Mount chainring connection with Sram standard 8 bolts and with all 11-12s single-chainring transmission systems, both Sram and Shimano, including Sram T-Type and Shimano Hyperglide+ chains.
The X-DirectDisc 8-hole 3 mm offset chainrings have an offset equal to 3 mm and are the natural replacement for chainrings with the same offset, thus maintaining the original chain line unchanged. Speaking of the new Sram Eagle transmission groupsets (XX SL, XX, XO, GX), X-DirectDisc 8-hole 3 mm offset mantain 55 mm stock chainline on cranks with 174 mm Q-Factor, or 52 mm chainline if mounted on cranks with 168 mm Q-Factor (to obtain a 55 mm chainline on cranks with a 168 mm Q-Factor it is necessary to purchase the X-DirectDisc 8 holes in the 0 mm offset version).
The offset of the original chainring is usually indicated with a laser engraved lettering on the back of the chainring. For any type of technical doubt relating to offset, chainline and compatibility, do not hesitate to contact us before purchasing.
The X-DirectDisc 8-hole 3 mm offset chainrings are also compatible with some cranks from the previous series of Sram Eagle XX1 groupsets, in particular those created to mount Quarq power meters equipped with an 8-bolt connection. In this case they generate a chainline of 52 mm.
With weights starting from 58 grams (30T), thanks to the optimized design, the X-DirectDisc 8-hole 3 mm offset chainrings are among the lightest of their type and are also aesthetically very appealing with a racing and elegant look at the same time same. You can find all the weights of the various configurations in the "product details" section of this product sheet.
The original packaging, in addition to the chainring, also includes the instruction manual in two languages (Italian and English), all in an elegant protective rigid cardboard box.
The X-DirectDisc 8-hole 3 mm offset chainrings, like all Carbon-Ti products, are proudly 100% Made in Italy!
Carbon-Ti X-DirectDisc 8-Hole 3 mm offset
Download (817.64KB)
Product |
Carbon-Ti X-DirectDisc 8-Hole 3 mm Offset Ultralight Direct Mount Chainring For Sram Eagle XX SL, XX, XO, GX From 58 gr.
|
Carbon-Ti X-DirectRing X-Truvativ 3 mm Offset Aluminium Monoring
|
Carbon-Ti X-DirectRing X-Cinch Aluminium Monoring
|
Carbon-Ti X-Ring Evo BCD 104 mm Ultralight Aluminium Mono-Ring
|
Availability |
IN STOCK
|
This product is no longer in stock
|
IN STOCK
|
IN STOCK
|
Price |
€58.93
|
€58.93
|
€58.93
|
€51.56
|
Description |
Carbon-Ti X-DirectDisc 8-hole 3 mm offset ultralight Direct Mount mono-ring with synchronized teeth, Aluminium CNC made.The "narrow wide" synchronized teeth allows it to work even without the chain guide. 7075T6 Aluminium assure a longer lasting than standard aluminum chainrings. Compatible with Sram Eagle cranks with 8 bolts Direct Mount chainring fixing (XX SL, XX, XO, GX etc.) and with all 11-12s chains. 3 mm Offset (55 mm chainline on to 174 mm Q-Factor cranks and 52 mm chainline on to 168 mm Q-Factor cranks). Available in 30T (58 gr.) - 32T (63 gr.) - 34T (67 gr.) - 36T (71 gr.) - 38T (78 gr.). Black anodized with laser etched graphics. 100% Made in Italy. |
Carbon-Ti X-DirectRing X-Truvativ 3 mm Offset, ultralight integrated monoring with synchronized teeth, 7075T6 Aluminium CNC made, direct mount on Sram cranks (XX1, X01, X0, X1 1400, XX1 Eagle, X01 Eagle, GX Eagle, NX Eagle) or other cranks with removable spider and the same fixing standard with 52 mm Boost chainline. Available in 30T - 32T - 34T - 36T. Weight from 49 gr. 100% Made in Italy. |
Carbon-Ti X-DirectRing X-Cinch, ultralight integrated monoring with synchronized teeth, 7075T6 Aluminium CNC made, direct mount on Race Face cranks (Next SL G4, Next SL, Next R, SIXC) or other cranks with removable spider and Cinch standard. Available in 30T - 32T - 34T - 36T. Weight from 50 gr. 100% Made in Italy. |
Carbon-Ti X-Ring EVO ultralight mono-ring with synchronized teeth, Aluminium CNC made, compatible with 11-12 speed drivetrain (Sram and Shimano both). The "narrow wide" synchronized teeth allows it to work even without the chain guide. The maximum reliability is guaranteed only with rear derailleurs with clutch as SRAM XX1 AXS, XX1 Eagle, XX1, X01 Eagle, X01, X1, GX, X0, X9 Type 2 or Shimano Shadow Plus. 7075T6 Aluminium assure a longer lasting than standard aluminum chainrings. Available in 30T (27 gr.) - 32T (34 gr.) - 34T (42 gr.) - 36T (47 gr.) - 38T (57 gr.), compatible with cranks with 4 holes 104 mm BCD spider ( Powermeter SRM and Quarq Sram XX1 Eagle included). 100% Made in Italy. |
Weight : |
58 gr. (30T) - 63 gr. (32T) - 67 gr. (34T) - 71 gr. (36T) - 78 gr. (38T) | 49 gr. (30T) - 52 gr. (32T) - 59 gr. (34T) - 67 gr. (36T) | 50 gr. (30T) - 52 gr. (32T) - 58 gr. (34T) - 68 gr. (36T) | 27 gr. (30T) - 34 gr. (32T) - 42 gr. (34T) - 47 gr. (36T) - 57 gr. (38T) |
Offset : |
3 mm | 3 mm | ||
Chainline : |
55 mm (174 mm Q-Factor cranks) - 52 mm (168 mm Q-Factor cranks) | 52 mm (Boost) | 51 mm as Race Face original | |
Material : |
Al 7075 T6 CNC | Al 7075 T6 CNC | Al 7075 T6 CNC | Al 7075 T6 CNC |
Finish : |
Black | Black anodized | Black anodized | Black |
Graphics : |
Laser etched | Laser etched | Laser etched | Laser etched |
Use : |
MTB | MTB, Road, Cross | MTB, Road, Cross | MTB |
Number of theet : |
30T-32T-34T-36T-38T | 30T-32T-34T-36T | 30T-32T-34T-36T | 30T-32T-34T-36T-38T |
Teeth Type : |
Synchronized | Synchronized | Synchronized | Synchronized |
BCD (bolt circle diameter) : |
Integral direct mount | Integral direct mount | 104 mm, 4 holes | |
Fitting : |
With Sram Eagle Direct Mount cranks with 8 bolts chainring fixing (XX SL, XX, XO, GX etc.) and 11-12s chains | Sram XX1,XX1 Eagle,X01,X01 Eagle,X0,X1-1400,GX Eagle,NX Eagle cranks and 10-11-12s drivetrain (Shimano 12s drivetrain and Sram T-Type chains excluded) | Race Face NEXT SL G4, NEXT SL, NEXT R, SIXC cranks and 10-11-12s drivetrain (Shimano 12s and Sram T-Type chains excluded) | With 4 holes 104 mm BCD cranks spiders (SRM Origin, Quarq Sram XX1 Eagle etc.) and 11-12s drivetrain |
Fixing Type : |
Direct Mount 8 bolts | |||
|
|
|
|
|
Carbon-Ti X-SyncroCam Ti, ultralight asymmetrical monoring with synchronized teeth, CNC made, compatible with 9-10-11-12 speed drivetrain. The special variable geometry allows a quicker overcoming of the dead spots and provides a more efficient and powerful pedal stroke. The "narrow wide" synchronized teeth allows it to work even without the chain guide. The maximum reliability is guaranteed only with rear derailleurs with clutch as SRAM XX1, X01, X1, GX, X0, X9 Type 2 or Shimano Shadow Plus. Grade 5 Titanium assure a three time longer lasting than aluminum chainrings. Available in 76 BCD 30T (45 gr.) - 32T (49 gr.) - 34T (54 gr.). 100% Made in Italy.
Carbon-Ti X-Ring EVO ultralight mono-ring with synchronized teeth, Aluminium CNC made, compatible with 11-12 speed drivetrain (Sram and Shimano both). The "narrow wide" synchronized teeth allows it to work even without the chain guide. The maximum reliability is guaranteed only with rear derailleurs with clutch as SRAM XX1 AXS, XX1 Eagle, XX1, X01 Eagle, X01, X1, GX, X0, X9 Type 2 or Shimano Shadow Plus. 7075T6 Aluminium assure a longer lasting than standard aluminum chainrings. Available in 30T (27 gr.) - 32T (34 gr.) - 34T (42 gr.) - 36T (47 gr.) - 38T (57 gr.), compatible with cranks with 4 holes 104 mm BCD spider ( Powermeter SRM and Quarq Sram XX1 Eagle included). 100% Made in Italy.
Ingrid MTB Direct Mount chainring compatible only with Ingrid cranks. It's made of 7075T6 aluminum alloy machined from solid with sophisticated CNC machining. The quality of the materials, the heat treatments undergone and the precision of the workmanship guarantee excellent precision, smoothness, chain retention capacity and great durability. 49.5 mm chainline (if used with 131 mm axle) or 52 mm (if used with 136 mm axle). Avaiolable with black anodized finish in 32T - 34T - 36T. weights between 76 and 86 grams. Compatible on single chainring systems with 11s-12s and 13s (Campagnolo Ekar) chains. 100% Made in Italy.
Absolute Black ultralight 7075Txxx aluminium CNC chainring narrow-wide type for monoring 9-10-11-12 speed drivetrains. Available in this standards : Cannondale Direct Mount - Sram Boost 148 Direct Mount - Sram BB30 Direct Mount - Sram BB30 Oval Direct Mount - BCD 64 4 holes - BCD 104 4 holes Oval. Black or red anodized, 28T-30T-32T. Weights from 39 grams. Designed and produced inside UE.
Gemini Rigel, super-light MTB Direct Mount 3 mm offset forged carbon chainring with 7075T6 aluminum teeth core. The special construction guarantees the same durability as an aluminum chainring but with less weight and friction and greater stiffness and smoothness, Narrow-Wide teeth for perfect chain retention. Produced with different attachment standards (Sram 3 bolts, sram 8 bolts, Shimano, Race Face/Easton, Cannondale Hollowgram). Compatible with all types of Sram and Shimano 11-12s chains. Forged carbon natural finish with molded graphics. Available in 30T-32T-34T-36T-38T with 3 mm offset. Weights starting from only 39 grams (Sram 3 holes 30T). Revolutionary design and technology, High quality superfine product. 100% Handcrafted in Barcelona, Spain.
Cruel Components VoR ultralight mono-ring chainring with synchronized teeth, Aluminium CNC made, compatible with 10-11-12 speed drivetrain (Sram and Shimano both). The "narrow wide" synchronized teeth allows it to work even without the chain guide. The maximum reliability is guaranteed only with rear derailleurs with clutch as SRAM XX1 AXS, XX1 Eagle, XX1, X01 Eagle, X01, X1, GX, X0, X9 Type 2 or Shimano Shadow Plus. 7075T6 Aluminium assure a longer lasting than standard aluminum chainrings. Available in 30T - 32T - 34T - 36T , black, gold or red anodized finish with milled graphics. Compatible with cranks with 4 holes 104 mm BCD spider ( Powermeter SRM and Quarq Sram XX1 Eagle included). Integrated female threaded chainring fixing bolts. 44 gr. weight (34T). 100% Made in Italy.
Ingrid Gravel Direct Mount chainring compatible only with Ingrid cranks. It's made of 7075T6 aluminum alloy machined from solid with sophisticated CNC machining. The quality of the materials, the heat treatments undergone and the precision of the workmanship guarantee excellent precision, smoothness, chain retention capacity and great durability. 49.5 mm chainline (if used with 131 mm axle) or 52 mm (if used with 136 mm axle). Avaiolable with black anodized finish in 36T - 38T - 40T - 42T. weights between 86 and 101 grams. Compatible on single chainring systems with 11s-12s and 13s (Campagnolo Ekar) chains. 100% Made in Italy.
Carbon-Ti X-DirectDisc 8-hole 3 mm offset ultralight Direct Mount mono-ring with synchronized teeth, Aluminium CNC made.The "narrow wide" synchronized teeth allows it to work even without the chain guide. 7075T6 Aluminium assure a longer lasting than standard aluminum chainrings. Compatible with Sram Eagle cranks with 8 bolts Direct Mount chainring fixing (XX SL, XX, XO, GX etc.) and with all 11-12s chains. 3 mm Offset (55 mm chainline on to 174 mm Q-Factor cranks and 52 mm chainline on to 168 mm Q-Factor cranks). Available in 30T (58 gr.) - 32T (63 gr.) - 34T (67 gr.) - 36T (71 gr.) - 38T (78 gr.). Black anodized with laser etched graphics. 100% Made in Italy.
