Carbon-Ti X-Ring EVO ultralight mono-ring with synchronized teeth, Aluminium CNC made, compatible with 11-12 speed drivetrain (Sram and Shimano both). The "narrow wide" synchronized teeth allows it to work even without the chain guide. The maximum reliability is guaranteed only with rear derailleurs with clutch as SRAM XX1 AXS, XX1 Eagle, XX1, X01 Eagle, X01, X1, GX, X0, X9 Type 2 or Shimano Shadow Plus. 7075T6 Aluminium assure a longer lasting than standard aluminum chainrings. Available in 30T (27 gr.) - 32T (34 gr.) - 34T (42 gr.) - 36T (47 gr.) - 38T (57 gr.), compatible with cranks with 4 holes 104 mm BCD spider ( Powermeter SRM and Quarq Sram XX1 Eagle included). 100% Made in Italy.
Carbon-Ti X-Ring EVO round chainrings are made of aluminium and are used as mono-rings with single chainring 11-12s drivetrains. They're fully compatible with stock chainrings with the same offset and of course chainline.
X-Ring EVO chainrings are fully CNC machined from a sheet of high quality 7075T6 aeronautical aluminium alloy. This material, very hard, allows a longer lasting than any other aluminium chainring on the market and this is a great advantage especially with mono-ring systems where chainring premature wearing is the biggest problem.
X-Ring EVO chainrings has got special teeth synchronized with the internal footprint of the chain allows it to work even without the chain guide. The maximum reliability is guaranted only with clutch equipped rear derailleurs like Sram Eagle-AXS-XX SL-xx-x0-XX1-X01-X1-GX-NX-X0-X9 type2 or Shimano Shadow Plus.
Every little detail is optimized on X-Ring EVO chainrings, CNC machining allows super precise tolerances and smooth shapes and a very silent working, chain drop-proof, optimal also in extreme mud conditions. Chainrings are finished in black anodized with laser engraved graphics and logos.
X-Ring EVO chainrings are made in BCD 104 mm (4 holes) standard and 30T-32T-34T-36T-38T teeth. They are compatible with all BCD 104 mm or 104/64 mm 4 holes cranks (Quarq Sram XX1 Eagle and SRM Origin included). They works with all 11-12s drivetrain Sram T-Type AXS (XX SL, XX, X0) included.
X-Ring EVO chainrings are fixed to the crank with only 4 standard male bolts (M8 x 0.75) with 7 mm or longer bolts. We recommend using the specific X-Fix X-Ring EVO kit available in different anodized colors. The male botls of the XX1 kits or similar (M8.5 x 0.75) are not compatible.
X-Ring EVO chainrings can be easily and quickly mounted or replaced on the competition fields acting only on male bolts without removing the crankset.
With weights from only 27 grams, X-Ring EVO chainrings are very light and their sophisticated and stilish design puts them to the top of the "lightweight" category.
They comes with an elegant cardboard box and with user manual (italian and english language both). X-Ring EVO chainrings, like all other Carbon-Ti products, are 100% proudly Made in Italy.
Product |
|
|
|
|
Availability |
Available
|
This product is no longer in stock
|
This product is no longer in stock
|
Available
|
Price |
€51.56
|
€48.36
|
€58.93
|
€58.93
|
Description |
Carbon-Ti X-Ring EVO ultralight mono-ring with synchronized teeth, Aluminium CNC made, compatible with 11-12 speed drivetrain (Sram and Shimano both). The "narrow wide" synchronized teeth allows it to work even without the chain guide. The maximum reliability is guaranteed only with rear derailleurs with clutch as SRAM XX1 AXS, XX1 Eagle, XX1, X01 Eagle, X01, X1, GX, X0, X9 Type 2 or Shimano Shadow Plus. 7075T6 Aluminium assure a longer lasting than standard aluminum chainrings. Available in 30T (27 gr.) - 32T (34 gr.) - 34T (42 gr.) - 36T (47 gr.) - 38T (57 gr.), compatible with cranks with 4 holes 104 mm BCD spider ( Powermeter SRM and Quarq Sram XX1 Eagle included). 100% Made in Italy. |
Extralite OctaOne, ultralight aluminium CNC made monoring for 9-10-11-12 speed drivetrains (Sram T-Type 12s excluded) compatible with 104 bcd 4 holes standard. Available in 30T - 32T - 34T - 36T with weights from 28.5 gr. 100% Made in Italy. |
Carbon-Ti X-DirectRing X-Truvativ 3 mm Offset, ultralight integrated monoring with synchronized teeth, 7075T6 Aluminium CNC made, direct mount on Sram cranks (XX1, X01, X0, X1 1400, XX1 Eagle, X01 Eagle, GX Eagle, NX Eagle) or other cranks with removable spider and the same fixing standard with 52 mm Boost chainline. Available in 30T - 32T - 34T - 36T. Weight from 49 gr. 100% Made in Italy. |
Carbon-Ti X-DirectRing X-Cinch, ultralight integrated monoring with synchronized teeth, 7075T6 Aluminium CNC made, direct mount on Race Face cranks (Next SL G4, Next SL, Next R, SIXC) or other cranks with removable spider and Cinch standard. Available in 30T - 32T - 34T - 36T. Weight from 50 gr. 100% Made in Italy. |
Weight : |
27 gr. (30T) - 34 gr. (32T) - 42 gr. (34T) - 47 gr. (36T) - 57 gr. (38T) | 28.5 gr. (30T) - 29.5 gr .(32T) - 32.0 gr. (34T) - 34.0 gr. (36T) | 49 gr. (30T) - 52 gr. (32T) - 59 gr. (34T) - 67 gr. (36T) | 50 gr. (30T) - 52 gr. (32T) - 58 gr. (34T) - 68 gr. (36T) |
Construction : |
Fine CNC machining | |||
Offset : |
3 mm | |||
Chainline : |
52 mm (Boost) | 51 mm as Race Face original | ||
Material : |
Al 7075 T6 CNC | Al 7075 T6 CNC | Al 7075 T6 CNC | Al 7075 T6 CNC |
Finish : |
Black | Black hard anodized | Black anodized | Black anodized |
Graphics : |
Laser etched | Laser etched | Laser etched | Laser etched |
Use : |
MTB | MTB, Road, Cross | MTB, Road, Cross | |
Number of theet : |
30T-32T-34T-36T-38T | 30T - 32T - 34T - 36T | 30T-32T-34T-36T | 30T-32T-34T-36T |
Teeth Type : |
Synchronized | Synchronized | Synchronized | |
Special : |
Female chainring bolts included | |||
BCD (bolt circle diameter) : |
104 mm, 4 holes | 104 mm 4 holes | Integral direct mount | Integral direct mount |
Fitting : |
With 4 holes 104 mm BCD cranks spiders (SRM Origin, Quarq Sram XX1 Eagle etc.) and 11-12s drivetrain | 9-10-11-12 speed monoring drivetrains (sram T-Type 12s excluded) | Sram XX1,XX1 Eagle,X01,X01 Eagle,X0,X1-1400,GX Eagle,NX Eagle cranks and 10-11-12s drivetrain (Shimano 12s drivetrain and Sram T-Type chains excluded) | Race Face NEXT SL G4, NEXT SL, NEXT R, SIXC cranks and 10-11-12s drivetrain (Shimano 12s and Sram T-Type chains excluded) |
There are no products selected for comparison
Absolute Black ultralight 7075Txxx aluminium CNC chainring narrow-wide type for monoring 9-10-11-12 speed drivetrains. Available in this standards : Cannondale Direct Mount - Sram Boost 148 Direct Mount - Sram BB30 Direct Mount - Sram BB30 Oval Direct Mount - BCD 64 4 holes - BCD 104 4 holes Oval. Black or red anodized, 28T-30T-32T. Weights from 39 grams. Designed and produced inside UE.
Carbon-Ti X-DirectDisc 8-hole 3 mm offset ultralight Direct Mount mono-ring with synchronized teeth, Aluminium CNC made.The "narrow wide" synchronized teeth allows it to work even without the chain guide. 7075T6 Aluminium assure a longer lasting than standard aluminum chainrings. Compatible with Sram Eagle cranks with 8 bolts Direct Mount chainring fixing (XX SL, XX, XO, GX etc.) and with all 11-12s chains. 3 mm Offset (55 mm chainline on to 174 mm Q-Factor cranks and 52 mm chainline on to 168 mm Q-Factor cranks). Available in 30T (58 gr.) - 32T (63 gr.) - 34T (67 gr.) - 36T (71 gr.) - 38T (78 gr.). Black anodized with laser etched graphics. 100% Made in Italy.
Ingrid MTB Direct Mount chainring compatible only with Ingrid cranks. It's made of 7075T6 aluminum alloy machined from solid with sophisticated CNC machining. The quality of the materials, the heat treatments undergone and the precision of the workmanship guarantee excellent precision, smoothness, chain retention capacity and great durability. 49.5 mm chainline (if used with 131 mm axle) or 52 mm (if used with 136 mm axle). Avaiolable with black anodized finish in 32T - 34T - 36T. weights between 76 and 86 grams. Compatible on single chainring systems with 11s-12s and 13s (Campagnolo Ekar) chains. 100% Made in Italy.
Carbon-Ti X-SyncroCam Ti, ultralight asymmetrical monoring with synchronized teeth, CNC made, compatible with 9-10-11-12 speed drivetrain. The special variable geometry allows a quicker overcoming of the dead spots and provides a more efficient and powerful pedal stroke. The "narrow wide" synchronized teeth allows it to work even without the chain guide. The maximum reliability is guaranteed only with rear derailleurs with clutch as SRAM XX1, X01, X1, GX, X0, X9 Type 2 or Shimano Shadow Plus. Grade 5 Titanium assure a three time longer lasting than aluminum chainrings. Available in 76 BCD 30T (45 gr.) - 32T (49 gr.) - 34T (54 gr.). 100% Made in Italy.
Gemini Rigel, super-light MTB Direct Mount 3 mm offset forged carbon chainring with 7075T6 aluminum teeth core. The special construction guarantees the same durability as an aluminum chainring but with less weight and friction and greater stiffness and smoothness, Narrow-Wide teeth for perfect chain retention. Produced with different attachment standards (Sram 3 bolts, sram 8 bolts, Shimano, Race Face/Easton, Cannondale Hollowgram). Compatible with all types of Sram and Shimano 11-12s chains. Forged carbon natural finish with molded graphics. Available in 30T-32T-34T-36T-38T with 3 mm offset. Weights starting from only 39 grams (Sram 3 holes 30T). Revolutionary design and technology, High quality superfine product. 100% Handcrafted in Barcelona, Spain.
Ingrid Gravel Direct Mount chainring compatible only with Ingrid cranks. It's made of 7075T6 aluminum alloy machined from solid with sophisticated CNC machining. The quality of the materials, the heat treatments undergone and the precision of the workmanship guarantee excellent precision, smoothness, chain retention capacity and great durability. 49.5 mm chainline (if used with 131 mm axle) or 52 mm (if used with 136 mm axle). Avaiolable with black anodized finish in 36T - 38T - 40T - 42T. weights between 86 and 101 grams. Compatible on single chainring systems with 11s-12s and 13s (Campagnolo Ekar) chains. 100% Made in Italy.
Cruel Components VoR ultralight mono-ring chainring with synchronized teeth, Aluminium CNC made, compatible with 10-11-12 speed drivetrain (Sram and Shimano both). The "narrow wide" synchronized teeth allows it to work even without the chain guide. The maximum reliability is guaranteed only with rear derailleurs with clutch as SRAM XX1 AXS, XX1 Eagle, XX1, X01 Eagle, X01, X1, GX, X0, X9 Type 2 or Shimano Shadow Plus. 7075T6 Aluminium assure a longer lasting than standard aluminum chainrings. Available in 30T - 32T - 34T - 36T , black, gold or red anodized finish with milled graphics. Compatible with cranks with 4 holes 104 mm BCD spider ( Powermeter SRM and Quarq Sram XX1 Eagle included). Integrated female threaded chainring fixing bolts. 44 gr. weight (34T). 100% Made in Italy.
GrigioCarbonio Tricolore HD 29" MTB 3 spoke tubeless wheels. Oversize structure and special design allows to use them for Heavy Duty Mountain Biking (All Mountain, Trail, E-Bike), these are strong wheels very safe and reliable with a great performance. Main core is made with T800 carbon fiber and monolithic construction with 35 mm inner channel rims. Hubs are high quality ones with fine 66 engages free-wheel system and oversize axles and SKF bearings. Hubs has got Boost (15x110 and 12x142 mm) and XD (11-12s) or Shimano Micro-Spline (12s) standards. 3K Twill or UD carbon fiber finish (matte). Sticker decals available in many colors. Only 1390 grams weight for the pair. No rider weight limit! Wheels 100% Made in Italy.
Carbon-Ti X-Fix X-Ring EVO ultralight chainring bolts kit which contains 4 males (M8x0.75) with standard lenght (7 mm). 7075T6 Aluminium CNC made with T30 torx hex insert, only 3.6 grams weight. Available in several anodized colors with Carbon-Ti laser engraved logo. It's a specific kit for X-Ring EVO BCD 104 mm chainrings and, as all Carbon-Ti products, are 100% Made in Italy.
