Hubs

Carbon-Ti

Carbon-Ti Bearing Kit For X-Hub SL/SP Front Hubs

€24.90

Carbon-Ti high quality bearing kit for X-Hub SL and SP front hubs, road or MTB every configuration (except Lefty hubs),  Complete kit include 2x 61803 bearings (17x26x5 mm). Genuine Carbon-Ti spare part.

 

Carbon-Ti

Carbon-Ti Bearing Kit For X-Hub SL/SP Rear Hubs

€49.90

Carbon-Ti high quality bearing kit for X-Hub SL and SP rear disc hubs (road or MTB every configuration),  Complete kit include 4 bearings (2 for hub shell and 2 for freewheel body) : 3x 61803 (17x26x5 mm) and 1x 61903 (17x30x7 mm). Original Carbon-Ti spare part.

 

Carbon-Ti

Carbon-Ti Bearing Kit For X-Hub X-Lefty SL/SP Front Hubs

€19.90

Carbon-Ti high quality bearing kit for X-Hub X-Lefty SL (Lefty) and SP (Lefty 2.0) front hubs. Complete kit include 1x 6805 bearing (25x37x7 mm) and 1x 6902 bearing (15x28x7 mm). Genuine Carbon-Ti spare part.

 

Carbon-Ti

Carbon-Ti X-Hub SL/SP QR15 Conversion Kit

€49.90

Carbon-Ti X-Hub SL/SP front hub QR15 conversion kit, allows to convert hub standard from quick release to QR15 15 mm thru axle. Kit include axle and axle ends but not bearing preload regulator that can be taked from standard QR axle. Compatible only with Carbon-Ti X-Hub SL and SP front hubs. Easy and fast to convert. Fully 7075T6 CNC made, 16.3 gr weight. Made in Italy.

Carbon-Ti

Carbon-Ti X-Hub SL/SP X-12 Conversion Kit

€59.90

Carbon-Ti X-Hub SL and SP rear hub X-12 conversion kit, allows to convert hub standard from quick release to X-12 12 mm thru axle. Kit include axle and axle ends but not bearing preload regulator that can be taked from standard QR axle. Compatible only with Carbon-Ti X-Hub SL and SP rear hubs. Easy and fast to convert. Fully 7075T6 CNC made, 32.3 gr weight. Made in Italy.

Carbon-Ti

Carbon-Ti X-Hub SL/SP X-RS-1 Conversion Kit

€59.90

Carbon-Ti X-Hub SL/SP conversion Kit, allows to convert hub standard from quick release or QR15 to X-RS-1 (compatible with the RockShox RS-1 fork). Consists of a front X-RS-1 axle and the relative lateral end and the bearing preload ring (BPS). It is necessary a recentering of the front wheel with an offset of about 2.8 mm in the opposite direction of the disc rotor. Fully Al 7075T6 CNC made, 39 gr. weight. Made in Italy.

Carbon-Ti

Carbon-Ti X-Lock QR12 Rear Wheel Thru Axle 12x142 and 12x148 Boost

€69.90

Carbon-Ti X-Lock 12 mm rear thru axle available in several standards (X-12 12x142; X-12 Boost 12x148; Shimano E-Thru 12x142 and 12x148 Boost; RockShox Maxle 12x142; Rock Shox Maxle 12x150; Rock Shox Maxle ABP 12x142 (192 mm); Rock Shox Maxle ABP Boost 12x148 (198 mm); Scott 12x142; Scott Boost (12x148). Aluminum 7075T6 CNC made, several anodized colors and laser etched graphics. Weights from 32 to 36 grams. Works with a 5 mm hex wrench.

 

 

Carbon-Ti

Carbon-Ti X-Lock QR15 Front Wheel Thru Axle 15x100 and 15x110 Boost

€49.90

Carbon-Ti X-Lock QR15 ultralight 15 mm thru axle for Fox or Rock Shox forks with standard width (15 x 100 mm) or Boost width (15 x 110 mm). Aluminum 7075T6 CNC made, several anodized colors and laser etched graphics. Weights from 34 gr. Works with a 5 mm hex wrench. 100% Made in Italy.

Carbon-Ti

Carbon-Ti X-Lock Special Color Kit

€26.90

Carbon-Ti X-Lock Special Color Kit allows to change color and look to your X-Lock Special Skewers road and MTB both. You can choose complete kit for front+rear skewers (kit include 4 axle ends and 4 springs) or singolar kit for front or rear skewer (kit include 2 axle ends and 2 springs). Axle ends are Al7075T6 CNC made and are available in many anodized colors or natural polished or white powdercoated, all with laser etched carbon-Ti logo.

Extralite

Extralite Aliens 3

€119.00

Extralite Aliens 3 ultralight quick release wheel skewers with Gr.5 titanium axles and Al7075T6 levers. Superbe machining and shaping. Extremely reliable although their only 55 gr. weight for the pair. Available in 6 beautiful anodized colors. Compatible with standard QR9 100 mm and QR10 130-135 mm Road or MTB hubs both.

Extralite

Extralite Alugrease Super 1 50 ml

€9.00

Extralite Alugrease Super 1 high performance grease specific for free-wheel hubs lubrification. Highly recommended for Extralite hubs will works also for other hubs and applications where a soft grease is required. 50 ml (60 gr.) tube. 

Extralite

Extralite BlackLock QR12 Rear Wheel Thru Axle 12 mm

€79.00

Extralite BlackLock QR12 ultralight 12 mm rear thru axle for frames with Shimano E-Thru, Specialized X-12; Rock Shox Maxle and Scott standard 142 mm or 148 mm Boost both. Fully CNC Al 7075T6 made, black anodized with laser etched graphics. Bronze washer for smooth action. Weights from 29 gr, allows to save up to 50 gr.  Locks with 6 mm hex wrench.

Extralite

Extralite BlackLock QR15 Front Wheel Thru Axle 15 mm

€79.00

Extralite BlackLock QR15 ultralight 15 mm thru axle for DT Swiss, Fox, (also Boost) Rock Shox (also Boost) or Magura forks. Fully CNC Al 7075T6 made, black anodized with laser etched graphics. Bronze washer for smooth action. Weights from 25 gr, allows to save up to 50 gr.  Locks with 6 mm hex wrench (BlackLock 15.1 with 8 mm hex wrench).

Extralite

Extralite HyperBoost3 F MTB Boost Front Hub 74 gr.

€199.00

Weighing just 74 grams, the Extralite HyperBoost3 F hub is the lightest Boost front hub in the world!. It's a straight pull hub with flanges for 24 or 28 spokes and is made entirely of 7075Txx aluminum with refined CNC machining, equipped with a 17 mm diameter axle optimized with variable thickness. Comes with two 6803 2RS stainless steel bearings but  as an option is possible to get ceramic or ceramic hybrid bearings and the oversized disc side bearing (6903 2RS). There's an external regulator ring for adjusting the axial bearing pre-load and side play. Disc brake rotor attach is 6 holes International Standard. The hub is compatible with Boost forks (110 x 15 mm). Black anodized finish with laser graphics. The HyperBoost3 F is 100% Made in Italy.

Extralite

Extralite HyperBoost3 R MTB Boost Rear Hub 148 gr.

€489.00

Weighing just 148 grams, the Extralite HyperBoost3 R hub is the lightest Boost rear hub in the world!. It's a straight pull hub for 24 or 28 spokes and is made entirely of 7075Txx aluminum with refined CNC machining, equipped with a 17 mm axle optimized with variable thickness. Direct front engagement freehub system 36T or 48T, Shimano MTB 11s, Sram XD 11-12s, Shimano MicroSpline 12s. Comes with stainless steel bearings but as an option is possible to get ceramic or ceramic hybrid bearings and the oversized 6903 disc side bearing. External regulator ring for axial bearing pre-load/side play adjusting. Disc brake rotor attach is 6 holes International Standard. The hub is compatible with Boost frames (148 x 12 mm). Black anodized finish with laser graphics. 100% Made in Italy.

Extralite

Extralite HyperFront Axle Kit QR15

€79.00

Extralite front hub axle kit, allows to convert HyperFront and Hyper JF hubs standard from quick release 9 mm to QR15 15 mm thru axle. Kit include axle and axle ends and bearing preload regulator (micro-tuner). Compatible only with Extralite HyperFront and Hyper JF front hubs. Easy and fast to convert. Fully 7075T6 CNC made, 19.5 gr weight. Made in Italy.

Extralite

Extralite HyperFront Axle Kit QR9

€79.00

Extralite front hub axle kit, allows to convert HyperFront and Hyper JF hubs standard from QR15 15 mm thru axle to quick release 9 mm. Kit include axle and axle ends and bearing preload regulator (micro-tuner). Compatible only with Extralite HyperFront and Hyper JF front hubs. Easy and fast to convert. Fully 7075T6 CNC made, 19.5 gr weight. Made in Italy.

Extralite

Extralite HyperHubs Enduro ABEC5 Bearings Kit Front+Rear

€72.00

ABI Enduro ABEC5 high quality bearings complete kit for Extralite Hyper series hubs (HyperBoost F, HyperBoost R, HyperFront, HyperLefty, Hyper JF, Hyper JL, HyperRear1&2, HyperCamber1&2 e Hyper JR),  Include 6 bearings (2 front + 4 rear). Weghts from 63 gr.

Extralite

Extralite HyperHubs Enduro ABEC5 Stainless Bearings Kit Front+Rear

€108.00

ABI Enduro ABEC5 high quality stainless steel bearings complete kit for Extralite Hyper series hubs (HyperBoost F, HyperBoost R, HyperFront, Hyper JF, HyperRear1&2, HyperCamber1&2 e Hyper JR),  Include 6 (2 front + 4 rear) stainless steel bearings that will last longer due to their better corrosion resistance. Weghts from 66 gr.

Extralite

Extralite HyperLefty 3 MTB Lefty Front Hub 76 gr.

€199.00

Weighing just 76 grams, the Extralite HyperLefty 3 hub is the lightest Lefty hub in the world!. It's a straight pull hub with flanges for 24 or 28 spokes and is made entirely of 7075Txx aluminum with refined CNC machining, equipped with a self-extracting tightening bolt. Comes with ABI 440c stainless steel bearings with 2RS protection but as an option is possible to have HDC ceramic hybrid bearings. Disc brake rotor attach is 6 holes International Standard. The hub is compatible with Cannondale Lefty 2.0 forks (Lefty 2.0, Lefty Ocho, Lefty SuperMax). Black anodized finish with laser graphics. The HyperLefty 3 is 100% Made in Italy.