Weighing just 76 grams, the Extralite HyperLefty 3 hub is the lightest Lefty hub in the world!. It's a straight pull hub with flanges for 24 or 28 spokes and is made entirely of 7075Txx aluminum with refined CNC machining, equipped with a self-extracting tightening bolt. Comes with ABI 440c stainless steel bearings with 2RS protection but as an option is possible to have HDC ceramic hybrid bearings. Disc brake rotor attach is 6 holes International Standard. The hub is compatible with Cannondale Lefty 2.0 forks (Lefty 2.0, Lefty Ocho, Lefty SuperMax). Black anodized finish with laser graphics. The HyperLefty 3 is 100% Made in Italy.
The Extralite HyperLefty 3 is a light and refined front hub for MTB use (XC, Marathon, All Mountain, Trail, Enduro) equipped with the Lefty 2.0 standard, therefore compatible only with Lefty 2.0, Lefty Ocho and Lefty SuperMax forks. The brake disc rotor attachment is the classic 6-hole International Standard.
It is a hub equipped with Straight-Pull flanges for straight pull spokes which guarantee greater wheel stiffness, less lateral flexibility and greater reactivity in transmitting the drive torque. It is possible to choose between 24-spoke or 28-spoke flanges. The sizing of the hub body is such as to ensure the best possible balance of the spoke tension on both sides of the wheel and allows the use of spokes of the same length on both sides of the wheel and on both wheels.
The hub body is entirely machined from solid through sophisticated CNC numerical control machining from a special 7075Txx aluminum bar, shapes and thicknesses are optimized to provide the best compromise between strength and weight with a truly captivating look. The self-extracting tightening bolt and the ring nut that keeps it in place are also made with the same material and philosophy. The hub body has a black anodized finish with white laser graphics, while the tightening bolt has an hard anodized finish (for greater durability and strength). The ring nut that keeps it in place is instead anodized in red.
The HyperLefty 3 hub rotates on a pair of 2RS double protection sealed bearings. The bearings fitted as standard are excellent ABI 440c stainless steel with great resistance to corrosion and consequently suitable for MTB use, especially in severe conditions with water and mud. The HDC (heavy Duty Ceramic) hybrid ceramic bearings can also be fitted as an option. The table below summarizes the advantages and disadvantages of the two different solutions:
Whatever the type of bearing chosen, Extralite pays great attention to the coupling between bearing, hub body and fork axle, selecting the components based on tolerances in order to guarantee the best smoothness and durability. The HyperLefty 3 hub is also equipped with a protection system from dirt and external agents thanks to a Teflon ring that is interposed between the hub and the fork and which further protects the bearing on the disc side despite being already equipped with double protection. The bearing on the opposite side is protected by the tightening screw and its ring nut. These precautions allow an excellent life of the bearings despite the reduced size and weight.
With a weight of only 76 grams, the HyperLefty 3 is the lightest MTB Lefty hub in the world, it allows a considerable weight saving, but it does so without compromising reliability and performance, thanks to the precautions adopted and the great build quality and materials used. The series of Extralite HyperBoost hubs has been present on the market for years and with its continuous evolution it maintains what is a primacy not only on the scale but also in technology. These are the hubs we use to assemble our lightest custom wheels (you will also find rear boost hub and front boost hub on our webshop) so do not hesitate to ask us for further information or quotes, even for complete wheels solutions that you cannot currently find on our website.
Extralite HyperLefty 3 hub is 100% made in Italy!
Anything that we actually have in stock for immediate delivery is marked as "IN STOCK" or "LAST ITEMS IN STOCK". On the other hand, when the product is not available in our warehouses, it can generally be ordered from the manufacturer (the wording "TO ORDER 7-10 DAYS" appears) with average waiting times of 7-10 days. Although rare, however, it is always possible that the product is not temporarily available even at the manufacturer itself, as we can at any time check the availability in stock at Extralite, we therefore always recommend contacting us before placing an order for material not available at the our warehouse, in this way we can check in real time and give you confirmation.
Product |
|
|
Availability |
This product is no longer in stock
|
This product is no longer in stock
|
Price |
€163.11
|
€163.11
|
Description |
Weighing just 76 grams, the Extralite HyperLefty 3 hub is the lightest Lefty hub in the world!. It's a straight pull hub with flanges for 24 or 28 spokes and is made entirely of 7075Txx aluminum with refined CNC machining, equipped with a self-extracting tightening bolt. Comes with ABI 440c stainless steel bearings with 2RS protection but as an option is possible to have HDC ceramic hybrid bearings. Disc brake rotor attach is 6 holes International Standard. The hub is compatible with Cannondale Lefty 2.0 forks (Lefty 2.0, Lefty Ocho, Lefty SuperMax). Black anodized finish with laser graphics. The HyperLefty 3 is 100% Made in Italy. |
Weighing just 74 grams, the Extralite HyperBoost3 F hub is the lightest Boost front hub in the world!. It's a straight pull hub with flanges for 24 or 28 spokes and is made entirely of 7075Txx aluminum with refined CNC machining, equipped with a 17 mm diameter axle optimized with variable thickness. Comes with two 6803 2RS stainless steel bearings but as an option is possible to get ceramic or ceramic hybrid bearings and the oversized disc side bearing (6903 2RS). There's an external regulator ring for adjusting the axial bearing pre-load and side play. Disc brake rotor attach is 6 holes International Standard. The hub is compatible with Boost forks (110 x 15 mm). Black anodized finish with laser graphics. The HyperBoost3 F is 100% Made in Italy. |
Weight : |
76 grams | 74 grams (with 6803 bearings) |
Material : |
Totally CNC from AL 7075 Txx | Totally CNC from AL 7075 Txx |
Fork Standard : |
Lefty 2.0 | Boost (110 x 15 mm) |
Bearing Type : |
Sealed radial with 2RS protection | |
Bearing Material : |
440c stainless steel or HDC ceramic hybrid (as option) | |
Finish : |
Black anodized | Black anodized |
Graphics : |
Laser etched | Laser etched |
Use : |
MTB XC, Marathon, All Mountain, Trail, Enduro | MTB XC, Marathon, All Mountain, Trail, Enduro |
Holes : |
24-28 h | 24-28 h |
Hub Width : |
110 mm | |
Bearings n° : |
2 | 2x 6803 2RS (as option 1x 6803 + 1x 6903) |
Bearings Preload : |
External Regulator | |
Fitting : |
With Cannondale Lefty 2.0, Lefty Ocho, Lefty SuperMax forks | |
Disc brake standard : |
6 holes International Standard | 6 holes International Standard |
Locking type : |
Self-extracting bolt | |
There are no products selected for comparison
Sram XD 11-12s complete freewheel body for Carbon-Ti hubs, include bearings, lip seal, freewheel teeth and springs. Compatible with X-Xub SL/SP Disc hubs, allows direct conversion from Sram/Shimano 10-11s to Sram XD 11-12s, to use all 11-12s Sram XD cassettes (XX1, X01, X1, GX1). Ready to installation. Only 48 grams. Available in 28T or 56T version (check your hub, 56T version has got a laser etched logo with "56T" written on the drive side flange) 100% Made in Italy.
Weighing just 74 grams, the Extralite HyperBoost3 F hub is the lightest Boost front hub in the world!. It's a straight pull hub with flanges for 24 or 28 spokes and is made entirely of 7075Txx aluminum with refined CNC machining, equipped with a 17 mm diameter axle optimized with variable thickness. Comes with two 6803 2RS stainless steel bearings but as an option is possible to get ceramic or ceramic hybrid bearings and the oversized disc side bearing (6903 2RS). There's an external regulator ring for adjusting the axial bearing pre-load and side play. Disc brake rotor attach is 6 holes International Standard. The hub is compatible with Boost forks (110 x 15 mm). Black anodized finish with laser graphics. The HyperBoost3 F is 100% Made in Italy.
Weighing just 148 grams, the Extralite HyperBoost3 R hub is the lightest Boost rear hub in the world!. It's a straight pull hub for 24 or 28 spokes and is made entirely of 7075Txx aluminum with refined CNC machining, equipped with a 17 mm axle optimized with variable thickness. Direct front engagement freehub system 36T or 48T, Shimano MTB 11s, Sram XD 11-12s, Shimano MicroSpline 12s. Comes with stainless steel bearings but as an option is possible to get ceramic or ceramic hybrid bearings and the oversized 6903 disc side bearing. External regulator ring for axial bearing pre-load/side play adjusting. Disc brake rotor attach is 6 holes International Standard. The hub is compatible with Boost frames (148 x 12 mm). Black anodized finish with laser graphics. 100% Made in Italy.
Gemini special adapter to install Alzir integrated handlebar on frames/bicycles with inner cable routing. 3D printed ABS, replace stock headset cover and can be installed directly with Alzir integrated handlebar or with Gemini headset spacers in the middle. Many models available, and can also be custom created for your application. Black raw ABS color, 100% made in Spain.
Carbon-Ti X-Cap Carbon ultralight headset cap for 1.1/8" stems. Carbon fiber made with 3k glossy natural carbon finishing and "carbon-Ti" logo pad printed in white color, only 5.5 grams, allows to save a lot of weight and adds a touch of racing look. Comes with a 7075T6 CNC alumnium bolt (M6 x 35 mm T25 Torx head) available in several anodized colors. 100% Made in Italy.
Extralite QRC-3 Road Racing cranks with spider for double chainrings with BCD 110 mm 5 arms standard. Made of CNC aluminum with ultralight hollow structure and integrated 30 mm oversize axle. Futuristic and refined design which, thanks to an impressive CNC artwork, allows to obtain extremely stiff and light cranks. 170 mm arms length, 142 mm Q-Factor, 44 mm chainline. Just 358 grams weight (cranks + axle + hardware). Available with various Bottom Brackets standards (as option) and bearing types (also ceramic). Black anodized finish with laser etched graphics and milled QRC-3 logo. Self-extracting system and external bearing pre-load adjustment. 100% Made in Italy.
Dream Wear Sbuff multipurpose light band made of polyester and elastan, tubular shape with soft thin and elastic fabric. can be used in many ways: as neck gaiter, balaclava, bandana, face mask or sweatband. Perfect form warm weather, is very comfortable thanks to very soft fabric. Customized with Dream Bikes graphics and pattern, 100% made in Italy!
GrigioCarbonio Hardwheel AS25 ultralight MTB 29" rim for tubeless or tubeless ready tires. Asymmetrical profile (3 mm offset), 25 mm height, 29 mm width (25 mm inner channel). Monocoque fully made with high module T800 carbon fiber, great technology and superior attention to details. With only 315 grams of weight is one the lightest clincher MTB rim on the market, but is extremely strong and reliable too and hasn't got any rider weight limit. 24h-28h-32h drilling, 3k Twill fiber fabric, glossy or matte finishing, sticker decals in many colors. 100% Made in Italy.
GrigioCarbonio Hardwheel AS30 ultralight MTB 29" rim for tubeless or tubeless ready tires. Asymmetrical profile (3 mm offset), 25 mm height, 34 mm width (30 mm inner channel). Monocoque fully made with high module T800 carbon fiber, great technology and superior attention to details. With only 330 grams of weight is one the lightest clincher MTB rim on the market for its size, but is extremely strong and reliable too and hasn't got any rider weight limit. 24h-28h-32h drilling, 3k Twill fiber fabric, glossy or matte finishing, sticker decals in many colors. 100% Made in Italy.
GrigioCarbonio Hardwheel AS35 ultralight MTB 29" rim for tubeless or tubeless ready tires. Asymmetrical profile (3 mm offset), 25 mm height, 39 mm width (35 mm inner channel). Monocoque fully made with high module T800 carbon fiber, great technology and superior attention to details. With only 360 grams of weight is one the lightest clincher MTB rim on the market for its size, but is extremely strong and reliable too and hasn't got any rider weight limit. 24h-28h-32h drilling, 3k Twill fiber fabric, glossy or matte finishing, sticker decals in many colors. 100% Made in Italy.
GrigioCarbonio Hardwheel AS31 ultralight MTB 29" rim for tubeless or tubeless ready tires. Asymmetrical profile (3 mm offset), 25 mm height, 34 mm width (31 mm inner channel). Monocoque fully made with high module T1000 carbon fiber, great technology and superior attention to details with differentiated construction for front rim and rear rim. With only 280 grams (front rim) and 300 grams (rear rim), is actually the lightest clincher MTB rim on the market for its size, but is extremely strong and reliable too and hasn't got any rider weight limit. 24h-28h-32h drilling, 12k or UD fiber fabric, glossy or matte finishing, sticker type removable graphics in many colors. 100% Made in Italy.
Weighing just 148 grams, the Extralite HyperBoost3 R hub is the lightest Boost rear hub in the world!. It's a straight pull hub for 24 or 28 spokes and is made entirely of 7075Txx aluminum with refined CNC machining, equipped with a 17 mm axle optimized with variable thickness. Direct front engagement freehub system 36T or 48T, Shimano MTB 11s, Sram XD 11-12s, Shimano MicroSpline 12s. Comes with stainless steel bearings but as an option is possible to get ceramic or ceramic hybrid bearings and the oversized 6903 disc side bearing. External regulator ring for axial bearing pre-load/side play adjusting. Disc brake rotor attach is 6 holes International Standard. The hub is compatible with Boost frames (148 x 12 mm). Black anodized finish with laser graphics. 100% Made in Italy.
PORTE (ex BERG) Rathe 30 XC SL 290 gr. ultralight MTB 29" carbon rim for tubeless or tubeless ready tires. Asymmetrical profile (2 mm offset), 21 mm height, 35 mm width (30 mm inner channel). Monocoque fully made with high quality carbon fiber with design and fabrics arrangement such as to guarantee high elasticity and superior impact resistance while mantaining great lateral stiffness. With only 290 grams of weight is one the lightest clincher MTB rim on the market, but is extremely strong and reliable too. 28h drilling, UD matte finish, glossy black graphics. 100 kg max. ISO 4210-7 tested and certified in Germany by EFBE. "Crash and Replacement" warranty.
GrigioCarbonio Primato AS26 MTB 29" Disc Tubeless Ready Wheels assembled with GrigioCarbonio Hardwheel AS26 T1000 carbon fiber rims (25 mm height, 29 mm wide, 26 mm inner channel), Extralite HyperBoost 3 hubs and Berd textile Dyneema straight-pull spokes. 24/24 - 24/28 - 28/28 spokes. Many freewheel standards available (Shimano 11s, Sram XD 11-12s, Shimano Micro-Spline 12s), Boost 110-148 mm, 15/12 mm thru axles, 12K or UD carbon fiber finish (glossy or matte). Sticker decals available in many colors. Weights from only 890 grams for the pair. No rider weight limit! Wheels Made in Italy.
MTB XC 29" ultralight wheels assembled with : Berg Ratheberg 30 XC SL 295 gr. carbon rims (for tubeless or tubeless ready tires, asymmetrical profile with 2 mm offset, 21 mm height, 35 mm width, 30 mm inner channel, 28h drilling, UD matte finish, glossy black graphics, 100 kg max. rider weight, ISO 4210-7 tested and certified in Germany by EFBE, "Crash and Replacement" warranty), Extralite HyperBoost3 hubs (7075 Aluminum fully CNC made, black anodized, front engagement 36T freehub system, 15x110 - Lefty 2.0 - RS-1 - 12x148, Sram XD 11-12s or Shimano MicroSpline 12s freewheel body, stainless steel sealed bearings, external bearings preload regulation), Alpina Hyperlite straight-pull steel aero black spokes and black anodizez aluminum nipples. Only 1070 grams/pair weight.
