Control Zone

Carbon-Ti

Carbon-Ti X-Cap Carbon Matte OS 1.1/4" Headset Cap

€19.90

Carbon-Ti X-Cap Matte OS ultralight special headset cap for 1.1/4" oversize stems. Carbon fiber made with 3k matte natural carbon finishing, only 6 grams, allows to save a lot of weight and  adds a touch of racing look. Comes with a 7075T6 CNC alumnium bolt (M6 x 35 mm T25 Torx head) available in several anodized colors. 100% Made in Italy.

Carbon-Ti

Carbon-Ti X-Cap Carbon Matte Ultralight Headset Cap

€19.90

Carbon-Ti X-Cap Matte ultralight headset cap for 1.1/8" stems. Carbon fiber made with 3k matte natural carbon finishing, only 5.5 grams, allows to save a lot of weight and  adds a touch of racing look. Comes with a 7075T6 CNC alumnium bolt (M6 x 35 mm T25 Torx head) available in several anodized colors. 100% Made in Italy.

Carbon-Ti

Carbon-Ti X-Cap Carbon Ultralight Headset Cap

€19.90

Carbon-Ti X-Cap Carbon ultralight headset cap for 1.1/8" stems. Carbon fiber made with 3k glossy natural carbon finishing and "carbon-Ti" logo pad printed in white color, only 5.5 grams, allows to save a lot of weight and  adds a touch of racing look. Comes with a 7075T6 CNC alumnium bolt (M6 x 35 mm T25 Torx head) available in several anodized colors. 100% Made in Italy.

Carbon-Ti

Carbon-Ti X-Cap Titanium

€19.90

Superlight headset Titanium Gr.5 cap, cnc machined supplied with a Torx 30mm Al7075-T6 anodized coloured bolt. Weights only 8.4 grams (bolt included). 100% Made in Italy.

Carbon-Ti

Carbon-Ti X-Cap Torx Spare Bolt

€3.90

Carbon-Ti spare bolt for X-Cap Carbon and Titanium. TSPEI M6 x 35 bolt with conical head and Torx insert, Al7075T6 CNC made. Available in several anodized colors. 100% Made in Italy.

Carbon-Ti

Carbon-Ti X-Plug OS 1.1/4" Steerer Expander

€22.90

Carbon-Ti X-Plug OS ultralight steerer expander for 1.1/4" oversize steerer tubes. Fully CNC aluminium made, only 17 grams, allows to save a lot of weight. Very easy to install and remove, you just need an 8 mm allen hex key,  compatible with steerer tubes with inner diameter from 24.0 to 28.0 mm, carbon fiber or aluminium ones both. 100% Made in Italy.

Carbon-Ti

Carbon-Ti X-Plug Steerer Expander

€19.90

Carbon-Ti X-Plug steerer expander is a practical and lightweight removable accessory which allows the locking of the headset cap adjusting bolt. The special design allows an extremely wide compatibility with most 1.1/8" carbon or aluminum alloy steerers on the market, they only should have inner diameter between 21.2 and 25.0 mm. It's 7075T6 Aluminum fully CNC made and with only 14 grams allows to save a lot of weight from stock headset expander systems. It's compatible with headset caps with M6 bolts and could be installed with an 8 mm hex wrench key. 100% Made in Italy.

Darimo Carbon

Darimo Carbon Computer Holder For Nexum Integrated Handlebar

€69.00

Darimo Carbon dedicated computer holder for Nexum and Nexum Drag integrated handlebars. Made of CNC 7075T6 aluminum, weighs only 15 grams, the adjustable slide system allows to modify the length out of the handlebar and perfectly fit many sizes of computers. Comes with Garmin or Wahoo support but can also be mounted with other fixing standards; Go-Pro mount in option. Black anodized color, 100% Made in Spain. 

Darimo Carbon

Darimo Carbon Ellipse Road Handlebar From 121 gr.

€399.00

Darimo Carbon Ellipse, with weights from only 121 gr. is the lightest Road handlebar in the world!. It's made of high module monocoque carbon fiber, super optimized in design and lamination, has got compact shape with 77 mm reach and 128 mm drop. FEM analysis and lab testing makes it not only ultralight but also safe and reliable (ISO 4210-2 safety tested). Available in 31.8 mm oversize diameter and 38-40-42-44 cm widths (c/c), carbon fiber 3k twill natural finishing or unidirectional UD (matte or gloss) with many decal color options. Road, Gravel, CX use compatible with 90 kg max rider weight (also without limitations on demand). 100% Made in Spain.

Darimo Carbon

Darimo Carbon Internal Cable Routing Adapter For Nexum Drag Handlebar

€55.00

Darimo Carbon special adapter to install Nexum Drag integrated handlebar on frames/bicycles with inner cable routing. 3D printed ABS, 5 mm thickness (even more if necessary or on demand). Can be produced to be installed over stock headset cover or to replace it (only for Tarmac SL8 and FSA ACR systems). Many models can be custom created for your application. Black raw ABS color, 100% made in Spain.

Darimo Carbon

Darimo Carbon IX2 Ultralight Stem - 12 degrees

€359.00

Darimo Carbon IX2 ultralight stem, +/-12° angle, for 31.8 mm handlebars and 1.1/8" standard or 1.1/4" oversize headtubes. With weights from only 57 gr. , is one of the lightest stem in the world but it's super strong, stiff and safe at the same time. Monocoque high module carbon fiber made with special gr.5 titanium bolts. Road, MTB (XC, Enduro), CX and Gravel use. 60-70-80-90-100-110-120-130 mm lenght, 3k or UD, glossy or matte finishing, decal stickers available in many colors. 100% Made in Spain.

Darimo Carbon

Darimo Carbon IX2 Ultralight Stem - 6 degrees

€359.00

Darimo Carbon IX2 ultralight stem, +/-6° angle, for 31.8 mm handlebars and 1.1/8" standard or 1.1/4" oversize headtubes. With weights from only 57 gr. , is one of the lightest stem in the world but it's super strong, stiff and safe at the same time. Monocoque high module carbon fiber made with special gr.5 titanium bolts. Road, MTB (XC, Enduro), CX and Gravel use. 60-70-80-90-100-110-120-130 mm lenght, 3k or UD, glossy or matte finishing, decal stickers available in many colors. 100% Made in Spain.

Darimo Carbon

Darimo Carbon IX2AL Ultralight CNC Aluminum Stem

€199.00

Darimo Carbon IX2AL ultralight CNC 7075T6 Aluminum stem, for 31.8 mm handlebars and 1.1/8" steering tubes. With weights from only 52 gr. is one of the lightest stem in the world but it's super strong, stiff and safe at the same time. The special design with closed front end assure a bigger surface contact with the handlebar and a superior stiffness with a stunning look too! Equipped with special gr.5 titanium bolts. MTB (XC, Marathon), Road Racing, Gravel and CX use. Available in 40-50-60-70-80-90-100-110-120-130 mm lenghts, and -6°/-12°/-17°/-25° angles, with natural aluminum or black anodized (bright or matte) finishing.  CNC engraved graphics. 100% Made in Spain.

Darimo Carbon

Darimo Carbon Nexum - FSA ACR Adapter

€55.00

Darimo Carbon special adapter to install Nexum integrated handlebar on frames/bicycles equipped with FSA ACR steering system, allows inner cable routing. 3D printed ABS, extremely light, combined with Nexum integrated handlebar (the lightest in the world) is the lightest steering solution possible for your bicycle! Black raw ABS color, 100% made in Spain.

Darimo Carbon

Darimo Carbon Nexum - Specialized Tarmac SL7 Adapter

€55.00

Darimo Carbon special adapter to install Nexum integrated handlebar on Specialized Tarmac SL7 frames/bicycles, allows inner cable routing. 3D printed ABS, only 6 grams weight, combined with Nexum integrated handlebar ( the lightest in the world) is the lightest steering solution possible for your Tarmac SL7! Black raw ABS color, 100% made in Spain.

Darimo Carbon

Darimo Carbon Nexum Drag Ultralight Integrated Road Aero Handlebar

€899.00

With only 225 gr. (100x420 mm) the Darimo Carbon Nexum Drag integrated handlebar is the lightest Aero one in the world! It's made of monocoque high quality carbon fiber optimized in shape, lamination and thickness. Is produced in 360-380-400-420-440 mm (c/c) width with compact shape (77 mm reach and 128 mm drop), flare : 0°, 6°, 16+5 (flare out, gravel version), combined with a stem available in 70-80-90-100-110-120-130 mm length and -6°/-12° angle. 1.1/8" headtube (also 1.1/4" in the future). You can choose the carbon texture (3k twill glossy or matte or UD matte), and adhesive graphic colors. The max rider weight allowed is 90 kg.  ISO 4210-2 certified. Compatible with internal cable routing frames (special adapters are required), and with computer mount. 100% made in Spain.

Darimo Carbon

Darimo Carbon Nexum Ultralight Integrated Road Handlebar

€849.00

With weights starting from only 180 gr. the Darimo Carbon Nexum integrated handlebar is the lightest in the world and therefore the lightest stem/handlebar combo you can choose for a road bike! It's made of monocoque high quality carbon fiber optimized in shape, lamination and thickness. It's a product that is not only ultralight but also safe and ISO 4210-2 certified. Is produced in 360-380-400-420-440 mm (c/c) width with compact shape (77 mm reach and 128 mm drop), combined with a stem available in 70-80-90-100-110-120-130 mm length and -6°/-12°/-17° angle. You can choose the carbon texture (3k twill or UD), the finishing (glossy or matte) and adhesive graphic colors. The max rider weight allowed is 90 kg.  Nexum handlebar is 100% made in Spain.

Extralite

Extralite bar clamps kit for Ultrastem

€24.90

Extralite bar clamps kit for Ultrastem/Roadstem, include 2 Al 7075 Txx full CNC made bar clamps (25.4 mm diameter). Weights only 6.0 - 6.5 gr for the pair. The kit is compatible with all kind of Ultrastem and Roadstem (MTB and road both) and if installed on <2011 Ultrastems will save about 2 grams. Not compatible with oversize 31.8 mm stem like Ultrastem OC, Roadstem OC and Hyperstem.

Extralite

Extralite CH-02 Computer Holder For HyperStem

€119.00

Extralite CH-02 ultralight computer holder specific for HyperStem. Made of T700 carbon fiber with Aluminum 7075Txx clamps, adds only 16.8 grams to HyperStem. Comes with Garmin support compatible with computers up to Edge 1030 size or Wahoo. Can be used also with other computer brands but require specifc support. Go-Pro mount as an option. 100% Made in Italy.

Extralite

Extralite ExtraBolt 10 Headset Spacers Kit

€15.90

Extralite ExtraBolt 10 ultralight Delrin CNC headset spacers kit, include 2x 5 mm spacers + 1x 10 mm spacer. 1.7 gr. each (5 mm) and 3.3 gr. (10 mm) weights, lighter than carbon fibre ones! Compatible with standard 1.1/8" or tapered 1.1/2" and 1.1/4" headset tubes. Sold only in complete kit. 100% Made in Italy.