Extralite HyperCap Headset Cap
    Extralite HyperCap Headset Cap
    Extralite HyperCap Headset Cap
    Extralite HyperCap Headset Cap
    Extralite HyperCap Headset Cap
    Extralite HyperCap Headset Cap
    Extralite HyperCap Headset Cap
    Extralite HyperCap Headset Cap
    Extralite HyperCap Headset Cap
    Extralite HyperCap Headset Cap
    Extralite HyperCap Headset Cap
    Extralite HyperCap Headset Cap
    Extralite

    Extralite HyperCap Headset Cap

    Reference: 
    €23.77

    Extralite HyperCap, headset cap for 1.1/8" standard stems. Fully alu 7075 T6 CNC machined, available in ten beautiful anodized colours with "pin-up" logo laser etching. Only 2.9 grams (ergal preload special bolt included).

    • Orange
    • Silver
    • Blue
    • Black
    • Black "Stealth"
    • Gold
    • Red
    • Turquoise
    • Acid Green
    • Purple
    Quantity
      IN STOCK

    Add to favorites Add to compare

    Whit its only 2.9 grams (preload bolt included) HyperCap is the lightest headset cap in the world. It's a little detail but help to customize your bike and become it lighter and unic.

     

    extralite hypercap

     

    HyperCap its' fully CNC made of 7075 T6 Aluminum, it's available in 10 beautiful anodized colors with super sexy Extralite "pin-up" laser etched! It's compatible with 1.1/8" standard stems.

    extralite hypercap

    HyperCap comes with a special aluminum hollow bolt with tapered head, optimized to save weight and reduce stress. It's a custom bolt that can't be easly replaced with other bolts so it's important to check that its 25 mm lenght are enough to thread on headset expander that should be at the top of fork head tube. HyperCap isn't only a cap but also works as a preload system for headset. Due to their aluminum bolt, please avoid eccessive torque that aren't required to correctly tune headset preload.

     extralite hypercap

    Extralite HyperCap is 100 % Made in Italy.

     

    extralite made in italy

    Product Details

    2 Items

    Data sheet

    Weight :
    2.9 gr. (preload bolt included)
    Steer tube clamp diameter :
    1.1/8" standard
    Material :
    Al 7075 T6 CNC
    Finish :
    8 anodized colors
    Graphics :
    Laser Pin-Up
    Top Cap Fitting :
    With M6 register bolt
    Bolt type :
    Special hollow TSPEI tapered head
    Bolt material :
    Al 7075 T6
    Bolt length :
    25 mm
    Screw color :
    Gun blue anodized
    Max tightening torque :
    2 Nm

    Quick Compare

    Product
    		 Extralite HyperCap Headset Cap Extralite HyperCap Headset Cap Carbon-Ti X-Cap Titanium Carbon-Ti X-Cap Titanium Carbon-Ti X-Cap Carbon Matte OS 1.1/4" Headset Cap Carbon-Ti X-Cap Carbon Matte OS 1.1/4" Headset Cap Carbon-Ti X-Cap Carbon Matte Ultralight Headset Cap Carbon-Ti X-Cap Carbon Matte Ultralight Headset Cap
    Availability
    Available
    Available
    This product is no longer in stock
    Available
    Price
    €15.57
    €16.31
    €16.31
    €16.31
    Description

    Extralite HyperCap, headset cap for 1.1/8" standard stems. Fully alu 7075 T6 CNC machined, available in eight beautiful anodized colours with "pin-up" logo laser etching. Only 2.9 grams (ergal preload special bolt included).

    Superlight headset Titanium Gr.5 cap, cnc machined supplied with a Torx 30mm Al7075-T6 anodized coloured bolt. Weights only 8.4 grams (bolt included). 100% Made in Italy.

    Carbon-Ti X-Cap Matte OS ultralight special headset cap for 1.1/4" oversize stems. Carbon fiber made with 3k matte natural carbon finishing, only 6 grams, allows to save a lot of weight and  adds a touch of racing look. Comes with a 7075T6 CNC alumnium bolt (M6 x 35 mm T25 Torx head) available in several anodized colors. 100% Made in Italy.

    Carbon-Ti X-Cap Matte ultralight headset cap for 1.1/8" stems. Carbon fiber made with 3k matte natural carbon finishing, only 5.5 grams, allows to save a lot of weight and  adds a touch of racing look. Comes with a 7075T6 CNC alumnium bolt (M6 x 35 mm T25 Torx head) available in several anodized colors. 100% Made in Italy.
    Weight :
    		 2.9 gr. (preload bolt included) 6 grams 5.5 grams
    Steer tube clamp diameter :
    		 1.1/8" standard 1.1/8" standard 1.1/4" Oversize 1.1/8" Standard
    Material :
    		 Al 7075 T6 CNC Gr.5 Titanium alloy Carbon fibre Carbon fibre
    Finish :
    		 8 anodized colors Natural titanium 3k matte natural carbon fiber cap, aluminium anodized bolt (several colors) 3k matte natural carbon fiber cap, aluminium anodized bolt (several colors)
    Graphics :
    		 Laser Pin-Up Laser etched
    Bolts :
    		 Alu 7075T6
    Top Cap Fitting :
    		 With M6 register bolt With M6 register bolt With M6 register bolt
    Bolt type :
    		 Special hollow TSPEI tapered head TSPEI countersunk flat head T25 torx socket TSPEI countersunk flat head T25 torx socket
    Bolt material :
    		 Al 7075 T6 Al 7075 T6 Al 7075 T6
    Bolt length :
    		 25 mm 35 mm 35 mm
    Screw color :
    		 Gun blue anodized Black, red, blue, gold, green, acid green, silver, polished Black, red, blue, gold, green, acid green, silver, polished
    Fitting :
    		 With 1.1/4" Oversize stems With 1.1/8" Standard stems
    Max tightening torque :
    		 2 Nm 2.5 Nm 2.5 Nm

    There are no products selected for comparison

    In the same category

    Carbon-Ti X-Cap Carbon Matte OS 1.1/4" Headset Cap Carbon-Ti X-Cap Carbon Matte OS 1.1/4" Headset Cap Carbon-Ti X-Cap Carbon Matte OS 1.1/4" Headset Cap
    Extralite

    Carbon-Ti X-Cap Carbon Matte OS 1.1/4" Headset Cap

    €16.31

    Carbon-Ti X-Cap Matte OS ultralight special headset cap for 1.1/4" oversize stems. Carbon fiber made with 3k matte natural carbon finishing, only 6 grams, allows to save a lot of weight and  adds a touch of racing look. Comes with a 7075T6 CNC alumnium bolt (M6 x 35 mm T25 Torx head) available in several anodized colors. 100% Made in Italy.

      Carbon-Ti X-Cap Carbon Ultralight Headset Cap Carbon-Ti X-Cap Carbon Ultralight Headset Cap Carbon-Ti X-Cap Carbon Ultralight Headset Cap
      Extralite

      Carbon-Ti X-Cap Carbon Ultralight Headset Cap

      €16.31

      Carbon-Ti X-Cap Carbon ultralight headset cap for 1.1/8" stems. Carbon fiber made with 3k glossy natural carbon finishing and "carbon-Ti" logo pad printed in white color, only 5.5 grams, allows to save a lot of weight and  adds a touch of racing look. Comes with a 7075T6 CNC alumnium bolt (M6 x 35 mm T25 Torx head) available in several anodized colors. 100% Made in Italy.

        Carbon-Ti X-Cap Carbon Matte Ultralight Headset Cap Carbon-Ti X-Cap Carbon Matte Ultralight Headset Cap Carbon-Ti X-Cap Carbon Matte Ultralight Headset Cap
        Extralite

        Carbon-Ti X-Cap Carbon Matte Ultralight Headset Cap

        €16.31

        Carbon-Ti X-Cap Matte ultralight headset cap for 1.1/8" stems. Carbon fiber made with 3k matte natural carbon finishing, only 5.5 grams, allows to save a lot of weight and  adds a touch of racing look. Comes with a 7075T6 CNC alumnium bolt (M6 x 35 mm T25 Torx head) available in several anodized colors. 100% Made in Italy.

          Carbon-Ti X-Cap Torx Spare Bolt
          Extralite

          Carbon-Ti X-Cap Torx Spare Bolt

          €3.20

          Carbon-Ti spare bolt for X-Cap Carbon and Titanium. TSPEI M6 x 35 bolt with conical head and Torx insert, Al7075T6 CNC made. Available in several anodized colors. 100% Made in Italy.

            Carbon-Ti X-Cap Titanium Carbon-Ti X-Cap Titanium Carbon-Ti X-Cap Titanium
            Extralite

            Carbon-Ti X-Cap Titanium

            €16.31

            Superlight headset Titanium Gr.5 cap, cnc machined supplied with a Torx 30mm Al7075-T6 anodized coloured bolt. Weights only 8.4 grams (bolt included). 100% Made in Italy.

              Viewed products

              Carbon-Ti X-Cap Carbon Ultralight Headset Cap Carbon-Ti X-Cap Carbon Ultralight Headset Cap Carbon-Ti X-Cap Carbon Ultralight Headset Cap
              Extralite

              Carbon-Ti X-Cap Carbon Ultralight Headset Cap

              €16.31

              Carbon-Ti X-Cap Carbon ultralight headset cap for 1.1/8" stems. Carbon fiber made with 3k glossy natural carbon finishing and "carbon-Ti" logo pad printed in white color, only 5.5 grams, allows to save a lot of weight and  adds a touch of racing look. Comes with a 7075T6 CNC alumnium bolt (M6 x 35 mm T25 Torx head) available in several anodized colors. 100% Made in Italy.

                You might also like

                Carbon-Ti X-Plug Steerer Expander Carbon-Ti X-Plug Steerer Expander Carbon-Ti X-Plug Steerer Expander
                Extralite

                Carbon-Ti X-Plug Steerer Expander

                €16.31

                Carbon-Ti X-Plug steerer expander is a practical and lightweight removable accessory which allows the locking of the headset cap adjusting bolt. The special design allows an extremely wide compatibility with most 1.1/8" carbon or aluminum alloy steerers on the market, they only should have inner diameter between 21.2 and 25.0 mm. It's 7075T6 Aluminum fully CNC made and with only 14 grams allows to save a lot of weight from stock headset expander systems. It's compatible with headset caps with M6 bolts and could be installed with an 8 mm hex wrench key. 100% Made in Italy.

                  GrigioCarbonio Attack T1000 Carbon Stem, The Lightest In The World! GrigioCarbonio Attack T1000 Carbon Stem, The Lightest In The World! GrigioCarbonio Attack T1000 Carbon Stem, The Lightest In The World!
                  Extralite

                  GrigioCarbonio Attack T1000 Carbon Stem, The Lightest In The World!

                  €613.93

                  GrigioCarbonio Attack T1000 ultralight stem, +/-6° or +/-17° angle, for 31.8 mm handlebars and 1.1/8" standard headtube. With only 55 gr. weight (70 mm), is the lightest stem in the world but it's super strong, stiff and safe at the same time. Monocoque high module carbon fiber made with special gr.5 titanium bolts. Road, MTB (XC, Enduro), CX and Gravel use. 70-80-90-100-110-120 mm lenght, 12k or UD, glossy or matte finishing, decal stickers and hardware available in many colors. 100% Made in Italy.

                    GrigioCarbonio Attack T800 Ultralight Carbon Stem GrigioCarbonio Attack T800 Ultralight Carbon Stem GrigioCarbonio Attack T800 Ultralight Carbon Stem
                    Extralite

                    GrigioCarbonio Attack T800 Ultralight Carbon Stem

                    €343.44

                    GrigioCarbonio Attack T800 ultralight stem, +/-6° or +/-17° angle, for 31.8 mm handlebars and 1.1/8" standard headtube. With only 65 gr. weight (70 mm), is one of the lightest stem in the world but it's super strong, stiff and safe at the same time. Monocoque high module carbon fiber made with special gr.5 titanium bolts. Road, MTB (XC, Enduro), CX and Gravel use. 70-80-90-100-110-120 mm length, 3k or UD, glossy or matte finishing, decal stickers and hardware available in many colors. 100% Made in Italy.

                      Darimo Carbon IX2 Ultralight Stem - 6 degrees Darimo Carbon IX2 Ultralight Stem - 6 degrees Darimo Carbon IX2 Ultralight Stem - 6 degrees
                      Extralite

                      Darimo Carbon IX2 Ultralight Stem - 6 degrees

                      €294.26

                      Darimo Carbon IX2 ultralight stem, +/-6° angle, for 31.8 mm handlebars and 1.1/8" standard or 1.1/4" oversize headtubes. With weights from only 57 gr. , is one of the lightest stem in the world but it's super strong, stiff and safe at the same time. Monocoque high module carbon fiber made with special gr.5 titanium bolts. Road, MTB (XC, Enduro), CX and Gravel use. 60-70-80-90-100-110-120-130 mm lenght, 3k or UD, glossy or matte finishing, decal stickers available in many colors. 100% Made in Spain.

                        Darimo Carbon IX2 Ultralight Stem - 12 degrees Darimo Carbon IX2 Ultralight Stem - 12 degrees Darimo Carbon IX2 Ultralight Stem - 12 degrees
                        Extralite

                        Darimo Carbon IX2 Ultralight Stem - 12 degrees

                        €294.26

                        Darimo Carbon IX2 ultralight stem, +/-12° angle, for 31.8 mm handlebars and 1.1/8" standard or 1.1/4" oversize headtubes. With weights from only 57 gr. , is one of the lightest stem in the world but it's super strong, stiff and safe at the same time. Monocoque high module carbon fiber made with special gr.5 titanium bolts. Road, MTB (XC, Enduro), CX and Gravel use. 60-70-80-90-100-110-120-130 mm lenght, 3k or UD, glossy or matte finishing, decal stickers available in many colors. 100% Made in Spain.

                          Extralite HyperStem O6 Stealth Extralite HyperStem O6 Stealth Extralite HyperStem O6 Stealth
                          Extralite

                          Extralite HyperStem O6 Stealth

                          €163.11

                          Extralite HyperStem O6 Stealth oversize 31.8 mm +/- 6° stem. With only 61 gr. (60 mm) weight, is the lightest aluminum stem in the world but it's strong, stiff and safe at the same time. Fully 7075 Txx CNC machined with special gr.5 titanium bolts black PVD coated. Road, MTB (XC, Enduro) and Gravel use. 1.1/8" head tube standard. 60-70-80-90-100-110-120 mm length, black anodized color with black laser etches (Stealth look).  CH-01 Computer Holder as option. 100% Made in Italy.

                            Extralite HyperStem O18 Stealth Extralite HyperStem O18 Stealth Extralite HyperStem O18 Stealth
                            Extralite

                            Extralite HyperStem O18 Stealth

                            €163.11

                            Extralite HyperStem O18 Stealth oversize 31.8 mm +/- 18° stem. With only 61 gr. (60 mm) weight, is the lightest aluminum stem in the world but it's strong, stiff and safe at the same time. Fully 7075 Txx CNC machined with special gr.5 titanium bolts black PVD coated. Road, MTB (XC, Enduro) and Gravel use. 1.1/8" head tube standard. 60-70-80-90-100 mm length, black anodized color with black laser etches (Stealth look).  CH-01 Computer Holder as option. 100% Made in Italy.

                              Extralite HyperStem O12 Stealth Extralite HyperStem O12 Stealth Extralite HyperStem O12 Stealth
                              Extralite

                              Extralite HyperStem O12 Stealth

                              €163.11

                              Extralite HyperStem O12 Stealth oversize 31.8 mm +/- 12° stem. With only 69 gr. (80 mm) weight, is the lightest aluminum stem in the world but it's strong, stiff and safe at the same time. Fully 7075 Txx CNC machined with special gr.5 titanium bolts black PVD coated. Road, MTB (XC, Enduro) and Gravel use. 1.1/8" head tube standard. 80-90-100-110-120 mm length, black anodized color with black laser etches (Stealth look).  CH-01 Computer Holder as option. 100% Made in Italy.

                                Darimo Carbon IX2AL Ultralight CNC Aluminum Stem Darimo Carbon IX2AL Ultralight CNC Aluminum Stem Darimo Carbon IX2AL Ultralight CNC Aluminum Stem
                                Extralite

                                Darimo Carbon IX2AL Ultralight CNC Aluminum Stem

                                €163.11

                                Darimo Carbon IX2AL ultralight CNC 7075T6 Aluminum stem, for 31.8 mm handlebars and 1.1/8" steering tubes. With weights from only 52 gr. is one of the lightest stem in the world but it's super strong, stiff and safe at the same time. The special design with closed front end assure a bigger surface contact with the handlebar and a superior stiffness with a stunning look too! Equipped with special gr.5 titanium bolts. MTB (XC, Marathon), Road Racing, Gravel and CX use. Available in 40-50-60-70-80-90-100-110-120-130 mm lenghts, and -6°/-12°/-17°/-25° angles, with natural aluminum or black anodized (bright or matte) finishing.  CNC engraved graphics. 100% Made in Spain.

                                  GrigioCarbonio Integrale MTB T800 Ultralight Carbon Handlebar from 139 gr. GrigioCarbonio Integrale MTB T800 Ultralight Carbon Handlebar from 139 gr. GrigioCarbonio Integrale MTB T800 Ultralight Carbon Handlebar from 139 gr.
                                  Extralite

                                  GrigioCarbonio Integrale MTB T800 Ultralight Carbon Handlebar from 139 gr.

                                  €531.97

                                  Grigiocarbonio Integrale ultralight T800 carbon fibre integrated MTB handlebar, 8° backsweep, 4° upsweep, from 600 mm to 780 mm width. -6° or -17° angle, 50-60-70-80-90-100 mm stem length, 1.1/8" steering tube standard, not compatible with barends. Weights from 139 gr. (150 gr. for a -17° x 70 mm x 740 mm). Overall great quality and details care, beautiful design, high stiffness and performance and extreme safety. 3K Twill or UD mesh, glossy or matte finishing. 100% Handmade in Italy!

                                    GrigioCarbonio Integrale MTB T1000 Ultralight Carbon Handlebar from 119 gr. GrigioCarbonio Integrale MTB T1000 Ultralight Carbon Handlebar from 119 gr. GrigioCarbonio Integrale MTB T1000 Ultralight Carbon Handlebar from 119 gr.
                                    Extralite

                                    GrigioCarbonio Integrale MTB T1000 Ultralight Carbon Handlebar from 119 gr.

                                    €704.10

                                    Grigiocarbonio Integrale ultralight T1000 carbon fibre integrated MTB handlebar, 8° backsweep, 4° upsweep, from 600 mm to 780 mm width. -6° or -17° angle, 50-60-70-80-90-100 mm stem length, 1.1/8" steering tube standard, not compatible with barends. With weights starting from 119 gr. (127 gr. for a -17° x 70 mm x 740 mm) is the lightest integrated handlebar on the market and also the lightest solution that you can choose for your MTB. Overall great quality and details care, beautiful design, high stiffness and performance and extreme safety, without any rider weight limit! 12K or UD mesh, glossy or matte finishing. 100% Handmade in Italy!