Alpitude Navene, ultralight high module carbon fibre saddle. Superior comfort due to its anatomic shape with large anticompression central open and super flexible seat. Weights from only 69 grams, 245 mm length (shortfit) and 130-142 mm widhts. 3K Twill matte, 1k matte or UD matte finish, white decal under clearcoat. Compatible with Road Racing, MTB or Gravel use, 95 kg max rider weight. HandMade in Italy with high quality standard and a beautiful design.
Alpitude Navene it's an ultralight carbon fiber saddle developed for road racing, MTB and gravel use (competitive or not). It's 100% handmade in Italy with high quality materials and standards and offer the best performance possible with a great comfort at the same time too.
It's endearing design isn't only for appearance but gives an high aerodynamic efficiency and also a great comfort due to the central open that unload prostate zone avoiding compression problems and assure fresh air in the "sensible zones".
Rounded edges and smooth side walls gives great flexibility and comfort and a nice feeling without any problems also after position changing. Lightly raised rear end help to keep the rider in position avoiding sliding sensation, typical for flat carbon fiber saddles.
Alpitude navene saddle has got a modern "shortfit" design, is 245 mm long and is available in two different widths : 130 and 142 mm, in this way many riders can find the right size. The saddle has got a wide and long front end so can easly support rider weight also during severe uphills, the anatomical center of the saddle (where it's 72 mm wide) at about 120 mm from the front nose.
The rails has got oval shape (7 x 9 mm), and are made of high module reinforced carbon fibers molded with high pressure to assure a great resistance, they could be tightened up to 8 Nm! There are also two bridges between saddle rails which allows to obtain a better load distribution. The rails has got about 90 mm range of horizontal regulation. Saddle body height is about 35 mm.
Alpitude Navene saddle is compatible with all 2 bolts longitudinal regulation seatposts and with single bolt transversal regulation seatposts that are equipped with clamps specific for elliptical rails carbon fiber saddles (7x10 mm). Also saddle body is high module carbon fiber made. Alpitude choose only top quality fibers and resin. There's a big hole in the middle of the saddle which save some weight but also allows a better ventilation. Alpitude Navene saddle is designed for road racing, gravel and MTB use for riders up to 95 kg.
The saddle has got natural 3k Twill matte, 1K matte or UD matte carbon fiber finishing. Comes with an elegant "Alpitude" white written at the centre of the backside, it's a decal graphic under clearcoat.
Alpitude Navene saddle weight could change due to saddle width, finishing and normal resin tolerance (+/- 5%), Weights starts from 69 grams (130 mm width, 3K Twill finish).
That's an incredible weight, especially for the great saddle comfort. The real goal is a clever design with a great anatomic shape mixed to an intelligent use of composite materials. The reduced weight on a saddle has a direct influence on the performance of a bicycle, especially when standing, sprinting or climbing, as it almost completely eliminates the pendulum effect and helps to lower the center of gravity, making it much more stable above all with the wet floor.
Alpitude Carbon saddles are 100% designed and produced in Italy with high quality standards, extreme care and an excellent aesthetic taste and comes with an elegant packaging.
Products that are available in our warehouse has got "IN STOCK" indication. All other products combinations has to be ordered from Alpitude with waiting times indicated below the "add to cart" button. Please take note that these are indicative and may undergo variations (ask us for a more accurate estimate of delivery times).
These products has to be considered ordered on demand so the right of withdrawal can't be applied to. This kind of order require advance payment for total amount.
All Alpitude products are 100% Made in Italy, made in Trentino at the foot of the Dolomites. Here ultra-light and high-performance carbon components are created in a perfect balance between Italian craftsmanship and innovation. Each product is individually crafted using premium quality materials and cutting-edge technologies. The result pushes the boundaries of what is possible and sets new standards for quality and performance. When you choose components from Alpitude Components, you can be sure you're getting only the best.
Prodotto |
|
Availability |
Questo prodotto non è più disponibile
|
Prezzo |
261,48 €
|
Descrizione |
Alpitude Navene, sella ultraleggera in fibra di carbonio ad alto modulo. Grande comfort grazie alla forma anatomica con ampia cavità centrale anticompressione e all'estrema flessibilità dello scafo in composito. Lunghezza 245 mm (shortfit), larghezza 130-142 mm. Pesi a partire da 69 gr. Carrello con binari ellittici 7x9 mm. Finitura in carbonio trama 3K Twill opaco, 1K opaco o UD opaco a scelta, grafica con decal bianca sotto trasparente. Adatta per uso sia stradale che MTB e gravel, limite peso biker 95 kg. Costruita a mano in Italia con elevati standard di qualità e design stiloso ed accattivante. |
Peso : |
69 gr. (130 mm 3k Twill) +/- 5 % |
Costruzione : |
Full Carbon |
Lunghezza : |
245 mm (Shortfit) |
Altezza : |
35 mm |
Larghezza : |
130-142 mm |
Materiale scafo : |
Fibra di carbonio ad alto modulo |
Materiale carrello : |
Fibra di carbonio ad alto modulo |
Dimensioni carrello : |
Ellittico 9 x 7 mm |
Range di regolazione : |
90 mm |
Finitura : |
3K Twill opaca, 1K opaca, UD opaca |
Grafiche : |
Decal bianca sotto trasparente |
Utilizzo : |
MTB, Strada, urban, Gravel |
Compatibilità : |
Con reggisella per carrelli sella ovali in carbonio |
Limite peso Biker : |
95 Kg |
Coppia massima di serraggio : |
8 Nm |
Centro anatomico : |
120 mm dalla punta (dove la sella è larga 72 mm) |
Non ci sono prodotti selezionati da comparare
Gelu Carbon Creation S1, ultralight high module carbon fibre saddle, only 60 grams, anatomic shape, anticompression design with a great comfort.. Super stiff due to its oversize elliptical rail and reinforced body. 246 mm lenght and 124 mm wide. 3K matte or gloss finish, racing and elegant at the same time. Compatible with Road racing, MTB or Gravel use, 115 kg max rider weight. HandMade in Portugal.
Gelu Carbon Creation E1, ultralight high module carbon fibre saddle, only 65 grams, anatomic shape, anticompression design with a great comfort.. Super stiff due to its oversize elliptical rail and reinforced body. 242 mm lenght and 124 mm wide. 3K matte or gloss finish, racing and elegant at the same time. Compatible with Road racing, MTB or Gravel use, 115 kg max rider weight. HandMade in Portugal.
Gelu Carbon Creation A1, ultralight high module carbon fibre saddle, only 60 grams. Oval 6.5 x 8.5 mm uninterrupted rails that works like a frame on the saddle perimeter for a superior resistance but also a great comfort thanks to the anatomic shape with anticompression design. 250 mm length and 124 mm wide. 3K matte or glossy finishing, racing and elegant at the same time. Compatible with Road and Off-Road use both, competitive or recreation, very good choice for Triathlon use. 115 kg max rider weight. Wide travel adjustment range. HandMade in Portugal.
Grigiocarbonio Integrale ultralight T800 carbon fibre integrated MTB handlebar, 8° backsweep, 4° upsweep, from 600 mm to 780 mm width. -6° or -17° angle, 50-60-70-80-90-100 mm stem length, 1.1/8" steering tube standard, not compatible with barends. Weights from 139 gr. (150 gr. for a -17° x 70 mm x 740 mm). Overall great quality and details care, beautiful design, high stiffness and performance and extreme safety. 3K Twill or UD mesh, glossy or matte finishing. 100% Handmade in Italy!
GrigioCarbonio Road Disc Tubular Wheels assembled with GrigioCarbonio Hardwheel T28 T1000 carbon fiber rims (28 mm height, 25 mm wide), Extralite CyberDisc SPD-3 hubs and Berd textile Dyneema straight-pull spokes. Many freewheel standards available (Shimano, Sram, Campagnolo...), quick release or 12 mm thru axles both, 12K or UD carbon fiber finish (glossy or matte). Sticker decals available in many colors. Weights from only 820 grams for the pair. No rider weight limit! Wheels Made in Italy.
Grigiocarbonio Tube ultralight T800 high module carbon fiber vertical seatpost (zero offset). Al 7075T6 CNC hardware, grade 5 Titanium bolts. Available in 27.2 - 30.9 - 31.6 diameters and 250 - 300 - 350 - 400 mm lengths. Weights starting from 101 grams (125 grams in 27.2 x 400 mm). Overall great quality and details care, beautiful design, high stiffness and performance and extreme safety (UNI EN 14766/2006 certified). 3K Twill or UD mesh, glossy or matte finishing, black anodized hardware, sticker type removable decals available in many colors. 100% Handmade in Italy!
Grigiocarbonio Tube AR25 ultralight T800 high module carbon fiber setback seatpost (-25 mm offset). Al 7075T6 CNC hardware, grade 5 Titanium bolts. Available in 27.2 diameter and 250 - 300 - 350 - 400 mm lengths. Weights starting from 105 grams (125 grams in 27.2 x 350 mm). Overall great quality and details care, beautiful design, high stiffness and performance and extreme safety (UNI EN 14766/2006 certified). 3K Twill or UD mesh, glossy or matte finishing, black anodized hardware, sticker type removable decals available in many colors. 100% Handmade in Italy!
Darimo Carbon T1 Aero is the lightest seatpost in the world specific for a Specialized SL7!. Has got 15 mm offset and weighs only 120 grams in 350 mm length. It's made of high module carbon fiber with Aluminium 7075T6 and Gr.5 Titanium hardware. High quality materials, super optimized design, FEM analysis and lab testing makes T1 Aero not only ultralight but also safe and reliable (ISO 4210 safety tested). Available in 250-300-350-400 mm lengths and in AXS or Di2 version (with junction box mount), carbon fiber 3k twill natural finishing or unidirectional UD (matte or glossy), many colors decal. Compatible with 7x7 or 7x9 saddle rails both. 90 kg max rider weight (also more on demand). 100% Made in Spain.
Darimo Carbon T1 Aero is the lightest seatpost in the world specific for Pinarello Dogma F8 - F10 - F12 ! Has got 15 mm offset and weighs only 110 grams in 350 mm length. It's made of high module carbon fiber with Aluminium 7075T6 and Gr.5 Titanium hardware. High quality materials, super optimized design, FEM analysis and lab testing makes T1 Aero not only ultralight but also safe and reliable (ISO 4210 safety tested). Available in 250-300-350-400 mm lengths, carbon fiber 3k twill natural finishing or unidirectional UD (matte or glossy), many colors decal. Compatible with 7x7 or 7x9 saddle rails both. 90 kg max rider weight (also more on demand). 100% Made in Spain.
Darimo Carbon T1 Aero is the lightest seatpost in the world specific for Factor Ostro! It's a straight seatpost with 0 mm offset and weighs only 115 grams in 350 mm length. It's made of high module carbon fiber with Aluminium 7075T6 and Gr.5 Titanium hardware. High quality materials, super optimized design, FEM analysis and lab testing makes T1 Aero not only ultralight but also safe and reliable (ISO 4210 safety tested). Available in 250-300-350-400 mm lengths, carbon fiber 3k twill natural finishing or unidirectional UD (matte or glossy), many colors decal. Compatible with 7x7 or 7x9 saddle rails both. 90 kg max rider weight (also more on demand). 100% Made in Spain.
Darimo Carbon T1 Aero is one of the lightest seatpost in the world specific for the Specialized Tarmac SL8! It's produced in straight version with 0 mm offset and in setback version with 15 mm offset, weigths starts from 93 grams. It's made of high module carbon fiber with Aluminium 7075T6 and Gr.5 Titanium hardware. High quality materials, super optimized design, FEM analysis and lab testing makes T1 Aero not only ultralight but also safe and reliable (ISO 4210 safety tested). Available in 250-300-350-400 mm lengths, carbon fiber 3k twill natural finishing or unidirectional UD (matte or glossy), many colors decal. Compatible with 7x7 or 7x9 saddle rails both. 95 kg max rider weight (also more on demand). 100% Made in Spain.
Darimo Carbon T1 Aero is the lightest seatpost in the world specific for Pinarello Dogma F ! Is produced in two versions : Straight (with 0 mm offset) and Setback (with -15 mm offset) and weighs only 102 grams in 300 mm length (Straight version). It's made of high module carbon fiber with Aluminium 7075T6 and Gr.5 Titanium hardware. High quality materials, super optimized design, FEM analysis and lab testing makes T1 Aero not only ultralight but also safe and reliable (ISO 4210 safety tested). Available in 250-300-350-400 mm lengths, carbon fiber 3k twill natural finishing or unidirectional UD (matte or glossy), many colors decal. Compatible with 7x7 or 7x9 saddle rails both. 90 kg max rider weight (also more on demand). 100% Made in Spain.
