Cruel Components VoR BCD 104 mm Ultralight Aluminium Mono-Ring
    Cruel Components VoR BCD 104 mm Ultralight Aluminium Mono-Ring
    Cruel Components VoR BCD 104 mm Ultralight Aluminium Mono-Ring
    Cruel Components VoR BCD 104 mm Ultralight Aluminium Mono-Ring
    Cruel Components VoR BCD 104 mm Ultralight Aluminium Mono-Ring
    Cruel Components VoR BCD 104 mm Ultralight Aluminium Mono-Ring
    Cruel Components VoR BCD 104 mm Ultralight Aluminium Mono-Ring
    Cruel Components VoR BCD 104 mm Ultralight Aluminium Mono-Ring
    Cruel Components VoR BCD 104 mm Ultralight Aluminium Mono-Ring
    Cruel Components VoR BCD 104 mm Ultralight Aluminium Mono-Ring
    Cruel Components VoR BCD 104 mm Ultralight Aluminium Mono-Ring
    Cruel Components VoR BCD 104 mm Ultralight Aluminium Mono-Ring
    Cruel Components VoR BCD 104 mm Ultralight Aluminium Mono-Ring
    Cruel Components VoR BCD 104 mm Ultralight Aluminium Mono-Ring
    Cruel Components VoR BCD 104 mm Ultralight Aluminium Mono-Ring
    Cruel Components

    Cruel Components VoR BCD 104 mm Ultralight Aluminium Mono-Ring

    Reference: 
    €49.10

    Cruel Components VoR ultralight mono-ring chainring with synchronized teeth, Aluminium CNC made, compatible with 10-11-12 speed drivetrain (Sram and Shimano both). The "narrow wide" synchronized teeth allows it to work even without the chain guide. The maximum reliability is guaranteed only with rear derailleurs with clutch as SRAM XX1 AXS, XX1 Eagle, XX1, X01 Eagle, X01, X1, GX, X0, X9 Type 2 or Shimano Shadow Plus. 7075T6 Aluminium assure a longer lasting than standard aluminum chainrings. Available in 30T - 32T - 34T - 36T , black, gold or red anodized finish with milled graphics. Compatible with cranks with 4 holes 104 mm BCD spider ( Powermeter SRM and Quarq Sram XX1 Eagle included). Integrated female threaded chainring fixing bolts. 44 gr. weight (34T). 100% Made in Italy.

    • Black
    • Gold
    • Red
    Quantity
      IN STOCK

    Add to favorites Aggiungi alla comparazione

    Cruel Components VoR round chainrings are made of aluminium and are used as mono-rings with single chainring 10-11-12s drivetrains. They're fully compatible with stock chainrings with the same offset and of course chainline.

    Cruel Components VoR BCD 104 mm Ultralight Aluminium Mono-Ring

    VoR chainrings are fully CNC machined from a sheet of high quality 7075T6 aeronautical aluminium alloy. This material, very hard, allows a longer lasting than any other aluminium chainring on the market and this is a great advantage especially with mono-ring systems where chainring premature wearing is the biggest problem.

    Cruel Components VoR BCD 104 mm Ultralight Aluminium Mono-Ring

    VoR chainrings has got special teeth synchronized with the internal footprint of the chain allows it to work even without the chain guide. The maximum reliability is guaranted only with clutch equipped rear derailleurs like Sram Eagle-AXS-XX1-X01-X1-GX-NX-X0-X9 type2 or Shimano Shadow Plus.

    Cruel Components VoR BCD 104 mm Ultralight Aluminium Mono-Ring

    Every little detail is optimized on VoR chainrings, CNC machining allows super precise tolerances and smooth shapes and a very silent working, chain drop-proof, optimal also in extreme mud conditions. Chainrings are finished in black, gold or red anodized with milled graphics and logos.

    Cruel Components VoR BCD 104 mm Ultralight Aluminium Mono-Ring

    VoR chainrings are made in BCD 104 mm (4 holes) standard and 30T-32T-34T-36T teeth. They are compatible with all BCD 104 mm or 104/64 mm 4 holes cranks (Quarq Sram XX1 Eagle and SRM Origin included).

    Cruel Components VoR BCD 104 mm Ultralight Aluminium Mono-Ring

    VoR chainrings are fixed to the crank with only 4 standard male bolts (M8 x 0.75) with 7 mm or longer bolts. 

    Cruel Components VoR BCD 104 mm Ultralight Aluminium Mono-Ring

    VoR chainrings can be easily and quickly mounted or replaced on the competition fields acting only on male bolts without removing the crankset. 

    Cruel Components VoR BCD 104 mm Ultralight Aluminium Mono-Ring

    With a weight of only 44 grams (34T), VoR chainrings are very light and their sophisticated and stilish design puts them to the top of the "lightweight" category. 

    Cruel Components VoR BCD 104 mm Ultralight Aluminium Mono-Ring

    They comes with an elegant cardboard box and with user manual. VoR chainrings, like all other Cruel Components products, are 100% proudly Made in Italy.

    Cruel Components VoR BCD 104 mm Ultralight Aluminium Mono-Ring

    cruel components made in italy

    Product Details

    Data sheet

    Weight :
    44 gr. (34T)
    Offset :
    0 mm
    Material :
    Al 7075 T6 CNC
    Finish :
    Anodized Black, Gold or Red
    Graphics :
    Milled
    Use :
    MTB
    Number of theet :
    30T-32T-34T-36T
    Teeth Type :
    Synchronized
    BCD (bolt circle diameter) :
    104 mm, 4 holes
    Fitting :
    With 4 holes 104 mm BCD cranks spiders (SRM Origin, Quarq Sram XX1 Eagle etc.) and 10-11-12s drivetrain

    Compara

    Prodotto
    		 Cruel Components VoR BCD 104 mm Mono-Corona Ultraleggera In Alluminio Cruel Components VoR BCD 104 mm Mono-Corona Ultraleggera In Alluminio Extralite OctaOne Monocorona BCD 104 mm Extralite OctaOne Monocorona BCD 104 mm Carbon-Ti X-DirectRing X-Truvativ Offset 3 mm Monocorona in Alluminio Carbon-Ti X-DirectRing X-Truvativ Offset 3 mm Monocorona in Alluminio Carbon-Ti X-DirectRing X-Cinch Monocorona in Alluminio Carbon-Ti X-DirectRing X-Cinch Monocorona in Alluminio
    Availability
    Disponibile
    Questo prodotto non è più disponibile
    Questo prodotto non è più disponibile
    Disponibile
    Prezzo
    49,10 €
    48,36 €
    58,93 €
    58,93 €
    Descrizione

    Cruel Components VoR, mono-corona sincronizzata superleggera in Alluminio CNC per sistemi mono-ring 10-11-12 velocità sia Sram che Shimano. Il profilo sincronizzato dei denti "narrow-wide" garantisce una perfetta ritenzione della catena e consente l'utilizzo senza guidacatena. La speciale lega 7075T6 assicura una durata notevolmente superiore rispetto ad una normale corona in alluminio. Compatibile con pedivelle dotate di attacco o spider 4 fori BCD 104 mm (Powermeter SRM e Quarq Sram XX1 Eagle comprese). Bussole femmina filettate integrate (per il fissaggio della corona). Finitura anodizzata nera, oro, rossa, grafiche incise da fresatura. Dentature 30T - 32T - 34T - 36T. Pesi : 44 gr. (34T)  100% Made in Italy.

    Extralite OctaOne, corona superleggera in ergal CNC per sistemi monoring 9-10-11-12 velocità (non compatibile con Sram T-Type) compatibile con girobulloni standard 4 fori 104 bcd. Disponibile nelle dentature 30T - 32T - 34T  - 36T con pesi a partire da 28.5 gr. 100% Made in Italy.

    Carbon-Ti X-DirectRing X-Truvativ Offset 3 mm, monocorona sincronizzata superleggera in alluminio 7075T6 CNC con innesto diretto su pedivelle Sram (XX1, X01, X0, X1 1400, XX1 Eagle, X01 Eagle, GX Eagle, NX Eagle) o compatibili purchè dotate di spider removibile e linea catena ottimizzata per standard Boost (52 mm). Dentature 30T - 32T - 34T - 36T . Pesi a partire da 49 gr. 100% Made in Italy.

    Carbon-Ti X-DirectRing X-Cinch, monocorona sincronizzata superleggera in alluminio 7075T6 CNC con innesto diretto su pedivelle Race Face (Next SL G4, Next SL, Next R, SIXC) o compatibili purchè dotate di spider removibile e innesto Cinch. Dentature 30T - 32T - 34T - 36T . Pesi a partire da 50 gr. 100% Made in Italy.
    Peso :
    		 44 gr. (34T) 28.5 gr. (30T) - 29.5 gr .(32T) - 32.0 gr. (34T) - 34.0 gr. (36T) 49 gr. (30T) - 52 gr. (32T) - 59 gr. (34T) - 67 gr. (36T) 50 gr. (30T) - 52 gr. (32T) - 58 gr. (34T) - 68 gr. (36T)
    Costruzione :
    		 CNC super accurato
    Offset :
    		 0 mm 3 mm
    Linea Catena :
    		 52 mm (Boost) 51 mm come le corone originali Race Face
    Materiale :
    		 Al 7075 T6 CNC Al 7075 T6 CNC Al 7075 T6 CNC Al 7075 T6 CNC
    Finitura :
    		 Anodizzata Nera, Oro, Rossa Nero anodizzato duro Nero anodizzato Nero anodizzato
    Grafiche :
    		 Incise tramite fresatura Laser Laser Laser
    Utilizzo :
    		 MTB MTB, Strada, Ciclocross MTB, Strada, Ciclocross
    Numero di denti :
    		 30T-32T-34T-36T 30T - 32T - 34T - 36T 30T-32T-34T-36T 30T-32T-34T-36T
    Tipo di denti :
    		 Sincronizzati Sincronizzati Sincronizzati
    Special :
    		 Bussole corona e distanziali integrati
    BCD (girobulloni) :
    		 104 mm, 4 fori 104 mm 4 fori Integrale montaggio diretto Integrale montaggio diretto
    Compatibilità :
    		 Con pedivelle dotate di spider con attacco a 4 fori 104 mm BCD (SRM Origin, Quarq Sram XX1 Eagle etc.) e trasmissioni 10-11-12v Con catene 12-11-10-9 velocità (non compatibile con Sram T-Type) Pedivelle Sram XX1,XX1 Eagle,X01,X01 Eagle,X0,X1-1400,GX Eagle,NX Eagle e trasmissioni 10-11-12v ( Shimano 12v e catene Sram T-Type escluse) Con pedivelle Race Face NEXT SL G4, NEXT SL, NEXT R, SIXC e trasmissioni 10-11-12v (Shimano 12v e catene Sram T-Type escluse)

    Non ci sono prodotti selezionati da comparare

    In the same category

    Gemini Rigel Ultralight Forged Carbon Fiber Direct Mount (3 mm Offset) MTB Chainring, From 39 gr. Gemini Rigel Ultralight Forged Carbon Fiber Direct Mount (3 mm Offset) MTB Chainring, From 39 gr. Gemini Rigel Ultralight Forged Carbon Fiber Direct Mount (3 mm Offset) MTB Chainring, From 39 gr.
    Cruel Components

    Gemini Rigel Ultralight Forged Carbon Fiber Direct Mount (3 mm Offset) MTB Chainring, From 39 gr.

    €122.13

    Gemini Rigel, super-light MTB Direct Mount 3 mm offset forged carbon chainring with 7075T6 aluminum teeth core. The special construction guarantees the same durability as an aluminum chainring but with less weight and friction and greater stiffness and smoothness, Narrow-Wide teeth for perfect chain retention. Produced with different attachment standards (Sram 3 bolts, sram 8 bolts, Shimano, Race Face/Easton, Cannondale Hollowgram). Compatible with all types of Sram and Shimano 11-12s chains. Forged carbon natural finish with molded graphics. Available in 30T-32T-34T-36T-38T with 3 mm offset. Weights starting from only 39 grams (Sram 3 holes 30T). Revolutionary design and technology, High quality superfine product. 100% Handcrafted in Barcelona, Spain.

      Absolute Black Ultralight Narrow Wide Monoring Absolute Black Ultralight Narrow Wide Monoring Absolute Black Ultralight Narrow Wide Monoring
      Cruel Components

      Absolute Black Ultralight Narrow Wide Monoring

      €32.70

      Absolute Black ultralight 7075Txxx aluminium CNC chainring narrow-wide type for monoring 9-10-11-12 speed drivetrains. Available in this standards : Cannondale Direct Mount - Sram Boost 148 Direct Mount - Sram BB30 Direct Mount - Sram BB30 Oval Direct Mount - BCD 64 4 holes - BCD 104 4 holes Oval. Black or red anodized, 28T-30T-32T. Weights from 39 grams. Designed and produced inside UE.

        Carbon-Ti X-SyncroCam Ti BCD 76 mm Asymmetric Titanium Monoring Carbon-Ti X-SyncroCam Ti BCD 76 mm Asymmetric Titanium Monoring Carbon-Ti X-SyncroCam Ti BCD 76 mm Asymmetric Titanium Monoring
        Cruel Components

        Carbon-Ti X-SyncroCam Ti BCD 76 mm Asymmetric Titanium Monoring

        €81.15

        Carbon-Ti X-SyncroCam Ti, ultralight asymmetrical monoring with synchronized teeth, CNC made, compatible with 9-10-11-12 speed drivetrain. The special variable geometry allows a quicker overcoming of the dead spots and provides a more efficient and powerful pedal stroke. The "narrow wide" synchronized teeth allows it to work even without the chain guide. The maximum reliability is guaranteed only with rear derailleurs with clutch as SRAM XX1, X01, X1, GX, X0, X9 Type 2 or Shimano Shadow Plus. Grade 5 Titanium assure a three time longer lasting than aluminum chainrings. Available in 76 BCD  30T - 34T. Weight : 45 gr. (30T) - 54 gr. (34T). Natural titanium satin finish or black. 100% Made in Italy.

          Ingrid MTB Direct Mount Single Chainring Ingrid MTB Direct Mount Single Chainring Ingrid MTB Direct Mount Single Chainring
          Cruel Components

          Ingrid MTB Direct Mount Single Chainring

          €89.34

          Ingrid MTB Direct Mount chainring compatible only with Ingrid cranks. It's made of 7075T6 aluminum alloy machined from solid with sophisticated CNC machining. The quality of the materials, the heat treatments undergone and the precision of the workmanship guarantee excellent precision, smoothness, chain retention capacity and great durability. 49.5 mm chainline (if used with 131 mm axle) or 52 mm (if used with 136 mm axle). Avaiolable with black anodized finish in 32T - 34T - 36T. weights between 76 and 86 grams. Compatible on single chainring systems with 11s-12s and 13s (Campagnolo Ekar) chains. 100% Made in Italy. 

            Carbon-Ti X-DirectRing X-Cinch Aluminium Monoring Carbon-Ti X-DirectRing X-Cinch Aluminium Monoring Carbon-Ti X-DirectRing X-Cinch Aluminium Monoring
            Cruel Components

            Carbon-Ti X-DirectRing X-Cinch Aluminium Monoring

            €58.93

            Carbon-Ti X-DirectRing X-Cinch, ultralight integrated monoring with synchronized teeth, 7075T6 Aluminium CNC made, direct mount on Race Face cranks (Next SL G4, Next SL, Next R, SIXC) or other cranks with removable spider and Cinch standard. Available in 30T - 32T - 34T - 36T. Weight from 50 gr. 100% Made in Italy.

              Carbon-Ti X-SyncroCam Ti BCD 76 mm Asymmetric Titanium Black Monoring Carbon-Ti X-SyncroCam Ti BCD 76 mm Asymmetric Titanium Black Monoring Carbon-Ti X-SyncroCam Ti BCD 76 mm Asymmetric Titanium Black Monoring
              Cruel Components

              Carbon-Ti X-SyncroCam Ti BCD 76 mm Asymmetric Titanium Black Monoring

              €81.15

              Carbon-Ti X-SyncroCam Ti, ultralight asymmetrical monoring with synchronized teeth, CNC made, compatible with 9-10-11-12 speed drivetrain. The special variable geometry allows a quicker overcoming of the dead spots and provides a more efficient and powerful pedal stroke. The "narrow wide" synchronized teeth allows it to work even without the chain guide. The maximum reliability is guaranteed only with rear derailleurs with clutch as SRAM XX1, X01, X1, GX, X0, X9 Type 2 or Shimano Shadow Plus. Grade 5 Titanium assure a three time longer lasting than aluminum chainrings. Available in 76 BCD  30T (45 gr.) - 32T (49 gr.) - 34T (54 gr.). 100% Made in Italy.

                Ingrid Gravel Direct Mount Single Chainring Ingrid Gravel Direct Mount Single Chainring Ingrid Gravel Direct Mount Single Chainring
                Cruel Components

                Ingrid Gravel Direct Mount Single Chainring

                €89.34

                Ingrid Gravel Direct Mount chainring compatible only with Ingrid cranks. It's made of 7075T6 aluminum alloy machined from solid with sophisticated CNC machining. The quality of the materials, the heat treatments undergone and the precision of the workmanship guarantee excellent precision, smoothness, chain retention capacity and great durability. 49.5 mm chainline (if used with 131 mm axle) or 52 mm (if used with 136 mm axle). Avaiolable with black anodized finish in 36T - 38T - 40T - 42T. weights between 86 and 101 grams. Compatible on single chainring systems with 11s-12s and 13s (Campagnolo Ekar) chains. 100% Made in Italy. 

                  Carbon-Ti X-MonoSync Ti BCD 104 mm Titanium Black Monoring Carbon-Ti X-MonoSync Ti BCD 104 mm Titanium Black Monoring Carbon-Ti X-MonoSync Ti BCD 104 mm Titanium Black Monoring
                  Cruel Components

                  Carbon-Ti X-MonoSync Ti BCD 104 mm Titanium Black Monoring

                  €104.84
                  Carbon-Ti X-MonoSync Ti, ultralight monoring with synchronized teeth, CNC made, compatible with 10-11-12 speed drivetrain. The "narrow wide" synchronized teeth allows it to work even without the chain guide. The maximum reliability is guaranteed only with rear derailleurs with clutch as SRAM XX1, X01, X1, GX, X0, X9 Type 2 or Shimano Shadow Plus. Grade 5 Titanium assure a three time longer lasting than aluminum chainrings. Available in 30T (33 gr.) - 32T (35 gr.) - 34T (42 gr.) - 36T (51 gr.), compatible with cranks with 4 holes 104 mm BCD spider (like Powermeter SRM and Quarq). 100% Made in Italy.
                    Carbon-Ti X-DirectRing X-Truvativ 3 mm Offset Aluminium Monoring Carbon-Ti X-DirectRing X-Truvativ 3 mm Offset Aluminium Monoring Carbon-Ti X-DirectRing X-Truvativ 3 mm Offset Aluminium Monoring
                    Cruel Components

                    Carbon-Ti X-DirectRing X-Truvativ 3 mm Offset Aluminium Monoring

                    €58.93

                    Carbon-Ti X-DirectRing X-Truvativ 3 mm Offset, ultralight integrated monoring with synchronized teeth, 7075T6 Aluminium CNC made, direct mount on Sram cranks (XX1, X01, X0, X1 1400, XX1 Eagle, X01 Eagle, GX Eagle, NX Eagle) or other cranks with removable spider and the same fixing standard with 52 mm Boost chainline. Available in 30T - 32T - 34T - 36T. Weight from 49 gr. 100% Made in Italy.

                      Carbon-Ti X-Ring Evo BCD 104 mm Ultralight Aluminium Mono-Ring Carbon-Ti X-Ring Evo BCD 104 mm Ultralight Aluminium Mono-Ring Carbon-Ti X-Ring Evo BCD 104 mm Ultralight Aluminium Mono-Ring
                      Cruel Components

                      Carbon-Ti X-Ring Evo BCD 104 mm Ultralight Aluminium Mono-Ring

                      €51.56

                      Carbon-Ti X-Ring EVO ultralight mono-ring with synchronized teeth, Aluminium CNC made, compatible with 11-12 speed drivetrain (Sram and Shimano both). The "narrow wide" synchronized teeth allows it to work even without the chain guide. The maximum reliability is guaranteed only with rear derailleurs with clutch as SRAM XX1 AXS, XX1 Eagle, XX1, X01 Eagle, X01, X1, GX, X0, X9 Type 2 or Shimano Shadow Plus. 7075T6 Aluminium assure a longer lasting than standard aluminum chainrings. Available in 30T (27 gr.) - 32T (34 gr.) - 34T (42 gr.) - 36T (47 gr.) - 38T (57 gr.), compatible with cranks with 4 holes 104 mm BCD spider ( Powermeter SRM and Quarq Sram XX1 Eagle included). 100% Made in Italy.

                        Carbon-Ti X-Monosync Titanium Monoring
                        Cruel Components

                        Carbon-Ti X-Monosync Titanium Monoring

                        €106.56 €95.90

                        Carbon-Ti X-MonoSync, ultralight monoring with synchronized teeth, grade 5 titanium CNC made, compatible with 9-10-11-12 speed drivetrain (Sram Eagle included).  Available in 104 bcd or 76 bcd 4 holes fixing , or with direct engage for Sram/Truvativ, Specialized S-Works and Hollowgram cranks with 28T - 30T - 32T - 34T - 36T. Weight from 33 gr.

                        • -10%
                        Extralite OctaOne 104 mm BCD Monoring Extralite OctaOne 104 mm BCD Monoring Extralite OctaOne 104 mm BCD Monoring
                        Cruel Components

                        Extralite OctaOne 104 mm BCD Monoring

                        €48.36

                        Extralite OctaOne, ultralight aluminium CNC made monoring for 9-10-11-12 speed drivetrains (Sram T-Type 12s excluded) compatible with 104 bcd 4 holes standard. Available in 30T - 32T - 34T - 36T  with weights from 28.5 gr. 100% Made in Italy.

                          Carbon-Ti X-DirectDisc 8-Hole 3 mm Offset Ultralight Direct Mount Chainring For Sram Eagle XX SL, XX, XO, GX From 58 gr. Carbon-Ti X-DirectDisc 8-Hole 3 mm Offset Ultralight Direct Mount Chainring For Sram Eagle XX SL, XX, XO, GX From 58 gr. Carbon-Ti X-DirectDisc 8-Hole 3 mm Offset Ultralight Direct Mount Chainring For Sram Eagle XX SL, XX, XO, GX From 58 gr.
                          Cruel Components

                          Carbon-Ti X-DirectDisc 8-Hole 3 mm Offset Ultralight Direct Mount Chainring For Sram Eagle XX SL, XX, XO, GX From 58 gr.

                          €58.93

                          Carbon-Ti X-DirectDisc 8-hole 3 mm offset ultralight Direct Mount mono-ring with synchronized teeth, Aluminium CNC made.The "narrow wide" synchronized teeth allows it to work even without the chain guide. 7075T6 Aluminium assure a longer lasting than standard aluminum chainrings. Compatible with Sram Eagle cranks with 8 bolts Direct Mount chainring fixing (XX SL, XX, XO, GX etc.) and with all 11-12s chains. 3 mm Offset (55 mm chainline on to 174 mm Q-Factor cranks and 52 mm chainline on to 168 mm Q-Factor cranks). Available in 30T (58 gr.) - 32T (63 gr.) - 34T (67 gr.) - 36T (71 gr.) - 38T (78 gr.). Black anodized with laser etched graphics. 100% Made in Italy.

                            Viewed products

                            Magped Ultra Magnetic Pedals Titanium Magped Ultra Magnetic Pedals Titanium Magped Ultra Magnetic Pedals Titanium
                            Cruel Components

                            Magped Ultra Magnetic Pedals Titanium

                            €146.72

                            Magped Ultra, automatic pedals with innovative patented magnetic mechanism, increase safety and efficiency, very easy to engage and release, fully tuneable, no mud problems.  Compatible with spd shoes, available with two different magnet power. CNC aluminium main core, titanium spindles, 3x bearings with double sealing. 379 gr. weight for the pair (150 N). Compatible with MTB (XC, Trail, All Mountain, Enduro, Free-ride) E-Bike and gravel use. Made in Austria.

                            • Out-of-Stock
                            GrigioCarbonio Primato AS26 29" MTB Wheels from 890 gr. GrigioCarbonio Primato AS26 29" MTB Wheels from 890 gr. GrigioCarbonio Primato AS26 29" MTB Wheels from 890 gr.
                            Cruel Components

                            GrigioCarbonio Primato AS26 29" MTB Wheels from 890 gr.

                            €3,434.43

                            GrigioCarbonio Primato AS26 MTB 29" Disc Tubeless Ready Wheels assembled with GrigioCarbonio Hardwheel AS26 T1000 carbon fiber rims (25 mm height, 29 mm wide, 26 mm inner channel), Extralite HyperBoost 3 hubs and Berd textile Dyneema straight-pull spokes. 24/24 - 24/28 - 28/28 spokes. Many freewheel standards available (Shimano 11s, Sram XD 11-12s, Shimano Micro-Spline 12s), Boost 110-148 mm, 15/12 mm thru axles, 12K or UD carbon fiber finish (glossy or matte). Sticker decals available in many colors. Weights from only 890 grams for the pair. No rider weight limit! Wheels Made in Italy.

                              You might also like

                              Carbon-Ti X-Fix X-Ring EVO Ultralight Chainring Bolts Kit Carbon-Ti X-Fix X-Ring EVO Ultralight Chainring Bolts Kit Carbon-Ti X-Fix X-Ring EVO Ultralight Chainring Bolts Kit
                              Cruel Components

                              Carbon-Ti X-Fix X-Ring EVO Ultralight Chainring Bolts Kit

                              €12.21

                              Carbon-Ti X-Fix X-Ring EVO ultralight chainring bolts kit which contains 4 males (M8x0.75) with standard lenght (7 mm). 7075T6 Aluminium CNC made with T30 torx hex insert, only 3.6 grams weight. Available in several anodized colors with Carbon-Ti laser engraved logo. It's a specific kit for X-Ring EVO BCD 104 mm chainrings and, as all Carbon-Ti products, are 100% Made in Italy.